Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
R-UPPER: Displays the time at the upper right of the screen. L-LOWER: Displays the time at the lower left of the screen. R-LOWER: Displays the time at the lower right of the screen. Notes: • When setting the time and date to be recorded together with images, the time display will be recorded in the selected position. • Refer to page 98 for further information about "Embedded REC (Time & Date)". 8 Camera Title Display Position Select a camera title display position from the following. L-UPPER: Displays the camera title at the upper left of the screen. L-LOWER: Displays the camera title at the lower left of the screen. R-UPPER: Displays the camera title at the upper right of the screen. R-LOWER: Displays the camera title at the lower right of the screen. CENTRE: Displays the camera title at the centre of the screen. Note: When setting the camera title to be recorded together with images, the time display will be embedded in the selected position. Refer to page 98 for further information about "Embedded REC (title)". 8 Line Colour on the Multi Screen Select a line colour from the following. WHITE: Displays white lines. GREY: Displays grey lines. BLACK: Displays black lines. [Monitor 1] Settings on monitor 1 display Select ON and OFF whether or not to display the time, camera title and alarm display on monitor 1. Schedule SystemDisplay CommSwitcher SETUP MENU LIVE Maintenance Recording OSD Setup Monitor 1 Monitor 2 Event ON Time & Date Display Camera Title Display Alarm Display ON ON 8 Time & Date Display Select ON and OFF whether or not to display the time. ON: Displays time. OFF: Does not function. 8 Camera Title Display Select ON and OFF whether or not to display the camera title. ON: Displays the camera title. OFF: Does not function. 8 Alarm Display Select ON and OFF whether or not to activate the alarm display at an event occurrence. ON: Displays the alarm display at an event occurrence. OFF: Does not function. [Monitor2] Settings on monitor 2 display Perform the display settings for monitor 2 such as the display mode (task bar style), time display position on/off, camera title display position, etc. SETUP MENU Maintenance Recording Event Schedule SystemDisplay CommSwitcher OSD Setup Monitor 1 Monitor 2 MODE 1 Display Mode T&D and Status Display Position Camera Title Display ON LOWER LIVE The following explain the settings for monitor 2 and the VGA monitor such as the display mode (task bar style), time display position, camera title display ON/OFF, etc. 8 Display Mode Select a display mode (task bar style) from the following. Refer to page 11 for further information about the task bar. MODE 1: Select [MODE 1] for the display mode. MODE 2: Select [MODE 2] for the display mode. MODE 3: Select [MODE 3] for the display mode. 8 T & D and Status Display Position When selecting MODE 1, select the position of the time and date display and the status from the following. UPPER: Displays them in the upper part of the screen. LOWER: Displays them in the lower part of the screen. 8 Camera Title Display Select ON and OFF whether or not to display the camera title. ON: Displays the camera title. OFF: Does not function. [Comm] Settings for communication with other devices It is necessary to adjust the communication speed and use the same communication protocol with external devices such as a controller when connecting those external devices to the DATA port or the SERIAL connector (RS232C). It is also necessary to perform the settings for the network such as the IP address and the gateway address when operating this unit a PC via a network such as a LAN. These are the descriptions of how to perform the required settings for communication with external devices. [Camera Control] Settings for the communication method and the cable compensation for camera control Select a communication method for each camera channel to control cameras from the following. Schedule SystemCommSwitcher SETUP MENU LIVE Maintenance Recording Event Display Camera Control PS.Data Setup RS485 Setup RS232C Setup NW Setup 1 NW Setup 2 NTP Setup Type of Camera Control CAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 CAM9 CAM10 CAM11 CAM12 CAM13 CAM14 CAM15 CAM16 RS485 PSDS S S S S S S S COAX COAX COAX COAX COAX COAX COAX COAX CAM CAM TYPECOMP TYPE COAX: Controls camera with the coaxial communication (CAM 1 - 8 CH are available for the WJ-HD316, CAM 1 6 CH are available for the WJ-HD309) PSD: Controls camera with the PS·Data. (CAM 9 - 16 CH are available for the WJ-HD316, CAM 7 - 9 CH are available for the WJ-HD309) RS485: Controls camera with the RS485 communication. (CAM 1 - 16 CH are available for the WJ-HD316, CAM 1 -9 CH are available for the WJ-HD309) OFF: Does not control camera (CAM 1 - 16 CH are available) Notes: • Perform settings according to the cameras connected to this unit. • CAM 9-16 control 4 cameras each (only for the WJHD316). • When using the coaxial communication to control cameras, connect cameras to the VIDEO IN connectors 1 8 for ...