Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
There are no user-serviceable parts inside. Refer servicing to qualified service personnel. • Do not expose the camera or camera control unit to rain or moisture, or do not try to operate it in wet areas. Do take immediate action if ever the camera or camera control unit do become wet. Turn power off and refer servicing to qualified service personnel. Moisture can damage the camera and camera control unit and also create the danger of electric shock. • Ambient Temperature range Do not install the camera in the place which is beyond 14 °F - 104 °F (-10°C - +40 °C). • Do not drop anything inside the camera. Dropping metal for example inside the camera could permanently damage the unit. • Never crush or pinch the camera cable. Do not bend the camera cable into a curve whose radius is too small. • Never face the camera is in use, never face it toward the sun. • Never face the camera toward the sun whether the camera is in use or not, never face it toward the sun. Do use caution when operating the camera in the vicinity of spot lights or other lights and light reflecting objects. • How to take care of this camera. After turning OFF the Power ON/OFF Switch, clean it with a dry cloth. If it is difficult to remove the dirt or dust, clean it up with a cloth applied the neutral cleanser. Use the lens cleaning tissue paper(may be available at your local camera store) for lens cleaning. • Connect this to a DC12V, 0.5 A - 0.7 A CLASS 2 Power supply only. • After using the camera, turn OFF the power ON/OFF Switch and put the lens cap on the camera head. • Every necessary procedures with regard to install this product should be made by qualified service personnel or system installers. Caution: Connecting or disconnecting camera cable to/from the camera control unit must be done after turning OFF the Power ON/OFF Switch. Otherwise, the camera head may be damaged. -2- SYSTEM BLOCK DIAGRAM MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Camera Control Unit GP-KS162CU Optional Camera Head GP-KS162H with Optional Lens GP-LM7TA © JT I .2 r c N O * (A CO 2 ¥ <6 O a -3- Camera Control Unit GP-KS162CU 1. DC Power On/Off Switch (DC POWER, ON/OFF) 2. Auto White Balance Control Button (AWC SET) The white balance can be set by pressing this button when the White Balance Selection Switch (4) is set to the AWC position. 3. White Balance Indicator 4. White Balance Selection Switch (WHITE BAL, AWC/ATW/MANU) AWC : The white balance is automatically set and fixed by detecting the characteristic / color temperature of light source through the lens and controlling the gain of red and blue signal. The White Balance Indicator lights during the setting. Note: When the White Balance Offset On/Off Switch is turned on, the fine adjustment for R/B gain is available by means of the R and B Gain Controls (5) after completing the white balance setting. The adjustable range is approx. 2,200K - 10.000K. ATW : The white balance is automatically and continuously set by detecting the characteristic / color temperature of light source through the lens and controlling the gain of red and blue signal even if the characteristic / color temperature varies. Note: When the White Balance Offset On/Off Switch is turned on, the fine adjustment for R/B gain is available by means of the R and B Gain Controls after completing the white balance setting. The adjustable range is approx. 2.300K - 6.000K. MANU: The R/B gain of the white balance can be adjusted manually by means of the R and B Gain Controls. The adjustable range of the white balance temperature is approx. 2,200K - 10,000K. 5. R/B Gain Controls (R/B) These controls are used to adjust the R and B gain of the white balance. 6. Auto Light On/Off Switch (AUTO LIGHT ON/OFF) ON: When this switch is set to the ON position, the video signal is set to the best level with the combination of the Electronic light Control On/Off Switch(14) and AGC On/Off Switch(15). 7. Video Level Selection Switch (VIDEO LEVEL, MANU/OFF) This switch is used to select the Video Level. OFF: When this switch is set to the OFF position, the video signal is supplied with the standard level. MANU: When this switch is set to the MANU position, the video level is adjustable by means of the Video Level Control (8). Note: This switch can be used as the Gain Up/Down Switch due to the value set by the Video Level Control (8). 8. Video Level Control (LEVEL) This controls the video level when the Video Level Selection Switch (7) is set to the MANU position. The video level control depends on the Auto Light On/Off Switch (6) setting as shown below. AUTO LIGHT OFF : By turning this counterclockwise, the video level is decreased. By turning this clockwise, the video level is increased. The video level setting at the center position of this control is higher than the standard one. AUTO LIGHT ON : By turning this counterclockwise, the standard video level is decreased. By turning this clockwise, ...