Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Procedure 1 2 Detach the front cover from the iris reader. (Refer to p. 28.) Make sure that the power is not supplied to the iris reader. Perform the setup switch setting. Set the operation mode to the stand-alone mode. (Refer to p. 21.) No. Procedure 3 4 5 6 7 8 9 Use a LAN cable to connect the setup PC and reader(s), and attach the front cover. Lead the LAN cable out of the rear side or the cable hole of the bottom side. (Refer to p. 29.) Supply the power to the iris reader. Perform the following settings using the web browser on the PC. • Register administrators. (Refer to p. 36.) • Set up the users with the operator’s privilege. (Refer to p. 37.) • Set up the operation information and recognition method. (Refer to p. 40.) Turn off the power supply. Detach the front cover, and remove the LAN cable. Attach the front cover to the iris reader. Connect the numeric key to the iris reader, and supply the power to the iris reader. Register users with the numeric key. • Shift from the recognition mode to the administrator mode. (Refer to p. 53.) • Register users. (Refer to p. 54.) • Shift from the administrator mode to the recognition mode. (Refer to p. 53.) Registering Administrators The following are descriptions of how to register administrators in the stand-alone mode. In the stand-alone mode, registration of at least one administrator is required. In the factory default setting, there are no administrators. At the time of initial setup, surely register an administrator. Up to three administrators can be registered. Reader ID: 1 IP Address: 192.168.0.3 Subnet Mask: 255.255.255.0 Gateway IP Address: No setting Step 1 Start up the web browser. Note: Use Microsoft® Internet Explorer® 6.0 SP2 (when the operating system is Microsoft® Windows® XP Professional SP2) or Microsoft® Internet Explorer® 6.0 SP1 (when the operating system is Microsoft® Windows® 2000 Professional SP4). [User ID] Enter a user ID. Available characters for the user ID: Alphanumeric characters (0-9, A-Z, a-z) Upper and lower case letters are distinguished. 6 to 16 1-byte characters can be entered. [Password] [Confirm password] Enter the password. Available characters for the user name: Alphanumeric characters (0-9, A-Z, a-z) Upper and lower case letters are distinguished. 6 to 16 1-byte characters can be entered. Step 5 Click the [OK] button. The administrator’s information is registered. Click [User/ Administrator] button. "User/Administrator" page is displayed. Then, register users with the operator’s privilege. (Refer to p. 37.) Step 2 Enter "in the address box of the browser. Step 3 Press the [Enter] key on the keyboard. > Administrator registration page will be displayed. Notes: • Take care not to forget the IDs and passwords of registered administrators, as they are required at the time of system restoration when the tamper detection function is activated. We recommend that you note down your settings and save them. • When the login page is displayed for the first time, the installation window to install ActiveX® is displayed. Do the installation according to the on screen instructions. • If the installation window is displayed again even after the installation is completed, restart the PC. Step 4 Complete each setting item displayed in the frame on the right of the window. Registering Users with the Operator’s Privilege Users with the operator’s privilege are registered after the registration of administrators to use the iris reader in the stand-alone mode. When users with the operator’s privilege are registered, the stand-alone mode (numeric key control) becomes available. Refer to p. 32 for setting items that can be set by users with operator’s privilege. Step 1 Display "User/Administrator" page. (Refer to p. 36.) Step 2 Click the [New] button. > [User] tab is displayed. [Operator’s Privilege] Select "Yes". Step 4 Capture the iris data by clicking the [Capture] button. (Refer to p. 44.) Step 5 Click the [Register] button. > Settings are registered, and the registration of user with operator’s privilege is completed. Setup from the Web Browser on the PC In the stand-alone mode, iris reader setup is available from the web browser. Notes: • Web browser control is available by administrators only. • Refer to p. 32 for details on setting items. Displaying the Setup Menu Step 1 Start up the web browser. Step 2 Enter "reader IP address/indexeng.html" in the address box of the browser. (Example: Step 3 Complete each setting item displayed in the frame on the right of the window. [User ID] Enter a user ID. 01 to 99 can be entered. [PIN] [Confirm PIN] Enter the PIN. 0000 to 9999 can be entered. Step 3 Press the [Enter] key on the keyboard. > Login page will be displayed. Step 4 Enter [User ID] and [Password]. > Setup Menu will be displayed. Step 2 Complete each setting item displayed in the frame on the right of the window. When there are tabs at the top of the s...