Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. FCC’s limits are designed to provide reasonable protection against harmful interference when operated in a residential environment. If this device does cause interference to radio or television reception, which can be determined by turning the device off and on, use this device in another location and/or utilize an electrical outlet different from that used by the receiver. If necessary, consult the dealer or an experienced radio/TV technician for help. CAUTION: To reduce the risk of fire or shock hazard and annoying interference, use the recommended accessories only. Lithium Battery Replace battery with part VL2330/1HF only. Use of another battery may present a risk of fire or explosion. Caution—Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. ] is the safety information. ■ Do not insert fingers or any objects into the video cassette holder. ■ Avoid operating or leaving the unit near strong magnetic fields. Be especially careful of large audio speakers. ■ Avoid operating or storing the unit in an excessively hot, cold, or damp environment as this may result in damage both to the recorder and to the tape. ■ Do not spray any cleaner or wax directly on the unit. ■ If the unit is not going to be used for a length of time, protect it from dirt and dust. ■ Do not leave a cassette in the recorder when not in use. ■ Do not block the ventilation slots of the unit. ■ Use this unit horizontally and do not place anything on the top panel. ■ Cassette tape can be used only for one-side, one direction recording. Two-way or two-track recordings cannot be made. ■ Cassette tape can be used for either Color or Black & White recording. ■ Do not attempt to disassemble the recorder. There are no user serviceable parts inside. ■ If any liquid spills inside the recorder, have the recorder examined for possible damage. ■ Refer any needed servicing to authorized service personnel. 2 Contents Features 4 Regular Maintenance Service Recommendation 4 Example of VTR Monitoring/Observation System 5 Parts And Their Functions 6 Menu Screens 9 Date and Time Settings 11 Time/Date Display Position 14 Time Mode Selection 15 Recording Procedure 16 Tips For Better Recording 17 • Recording Mode Lock 17 • Hour Meter 17 • Recording Check * 17 • Resto rati on -of- Powe r-Afte r- Fa 11 u re Recording 17 Timer Recording 18 • Internal Timer Recording 18 Daily Recording (Daily Timer)/ Weekly Recording (Weekly Timer) 20 • External Timer Recording 22 Auto Repeat Recording/Auto Rewinding 23 Alarm Recording (Emergency Recording) 24 • Event Recording 26 • Alarm Recall 27 Sequential Switcher Connection and Recording 28 Playback Procedure 29 Routine & Regular Inspection Request 30 Troubleshooting 31 Specifications 33 Caution for DC Power supply 1 A DC voltage ranging from 10 OV to DC 16 0V can be supplied to operate this VTR Ensure that the VTR is operated within this range The VTR must be operated only in a car with a negative ground Under no circumstances should it be operated in a car with a positive ground 2 A power supply current of approximately 5A is required Use a DC power supply capable of supplying sufficient power If the power capacity is insufficient, the unit will not operate properly Care should therefore be taken to ensure that capacity is sufficient 3 Not all the power to this VTR will be turned OFF by setting the front panel switch to OFF The clock will still operate and the lithium battery will continue to be charged Please give this point special consideration when using a battery as an external power supply When extraneous noise reaches the equipment through the power line, it may appear on the picture or be heard in the sound In a case like this, insert a power supply noise filter designed for car component in the power line Select the filter carefully so that no voltage drop will occur For further information, consult with your dealer When a single DC power supply is being used to supply power to not only the VTR but also the VTR monitor and camera, interference may occur between the components and this may appear as noise on the picture or be heard as noise in the sound An effective way to deal with this is to connect the signal lines of the component through video and audio transformers so that the DC current is not allowed to flow to the signal lines For further information, consult with your dealer Microphone Au{jl0 transformer Camera GND 3 Features Recording and playback in 12- and 24-hour time modes In addition to the 2- and 6-hour time modes, recording and playback can be performed in the time lapse modes (12- and 24-hour modes). Excellently defined still-picture images More clearly defined still picture images can be produced during playback in the black-and-white mode thanks to the horizontal resolution of 30...