• Except on holiday> Pressing this soft key will disable the sked on holidays and change the first line of the display to Skd 1 08:00am with the X. Consult your security company and determine which holidays have been programmed in your system. The display changes to allow a new time to be entered. Enter the new time using a 12-hour (HH:MM) format. Ex: If the desired time is 8:00, press 8 + 0 + 0. Press the Enter> soft key or the ENTER button. 8. If the time is a valid time, the keypad display changes to show the new time with a selection of AM or PM. Press the AM> soft key to select AM. Press the PM> soft key to select PM. 9. The display shows the Sked with the new time. Press the soft key or the ENTER button. 5. If the user number entered is a valid user in the system, the display will show Delete User 123? Are you sure? 2. Press the COMMAND key. The display shows *System Command*. (123 is as an example.) If the user number entered is not a valid user in the system, the display will show This user is 3. Press the 5 key and then the 3 key. currently not in use. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the DEL USER ?> prompt, press its adjacent soft key. 4. The display changes to show Enter user # to be deleted: 6. Press the Yes> soft key to delete the user. The display briefly shows that the user has been deleted before returning to idle text (123 is used as an example). The user text is not deleted when deleting a user. To modify a user’s text, see Add/Change User (Command 56). Bosch Security Systems | 9/04 | 50410D D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG RELAYS ? (COMMAND + 5 + 4) D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHG RELAYS ? (COMMAND + 5 + 4) CHG RELAYS ? (COMMAND + 5 + 4) Your security company may program relays for automatic control and/or control from your keypad of devices such as premises lighting or entry gates. Contact them for further information regarding the use of relays in your security system. 1. Ensure your keypad shows idle disarmed text. 2. Press the COMMAND key. The display shows *System Command*. 3. Press the 5 key and then the 4 key. If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function. Press the MENU> soft key to enter the Command Menu. Press NEXT> soft key repeatedly. When you reach the CHG RELAYS ?> prompt, press its adjacent soft key. 4. The command center display changes *Change Relay* Enter relay number: Valid entries are 1 to 128, depending how the system is configured. Enter the relay number then press either the Enter> soft key or the ENTER button. 5. If the relay is valid and turned off, the display changes to Change Relay* Relay 123 is currently off. (123 is used ...
