Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
The Main/Call monitor displays selected live or recorded cameras in any available format. 2.4 BOOT UP EDR1640/1620/920 (1) Insert a HDD (IDE) for Video Storage Insert a HDD(IDE) for Video Storage. The HDD should be set as MASTER. After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position. Otherwise, HDD will not be detected. Note: A HDD has to be installed before EDR1640/1620/920 is booted, or the EDR1640/1620/920 will not detect a HDD until you reboot it with a HDD. Please make sure the HDD indicator light is ON. (2) Connect cable for video/audio input and video/audio out. (3) Turn on system The system will be turned on after connecting to power. 21 3. MENU SETUP To set up the machine before using is necessary, especially first time to use. Press MENU key to enter the MAIN MENU. Press MENU key or click on the arrow at the top right corner of the screen with a mouse to quit current setting, and go back to last setting. MENU Dial the Jog clockwise or counterclockwise to change subentry values. Press the ENTER key to go next subentry in a menu setting, and press the CALL key to go last subentry in a menu setting. Or, simply use the mouse to go next or last subentry in a menu setting, and use tilt wheel of the mouse to move between every selection. 3.1 TIME / DATE SETUP MENU 22 In the TIME/DATE SETUP MENU, we define : (1) TIME FORMAT: There are two time formats that are 12 HOUR and 24 HOUR to be selected. (2) TIME: Current time Hour: 00 ~ 23 (1 ~ 12 if TIME FORMAT is 12 HOUR) Minute : 00 ~ 59 Second: 00 ~ 59 (3) DATE FORMAT: There are three date formats which are YYYY-MM-DD, MM-DD-YYYY and DD-MMYYYY to be selected. (4) DATE: Current date Date: 01~31 Month:01~12 Year: 2000 ~ 2099 Day:Sun~Mon (5) DAYLIGHT SAVING: Select “ON”or “OFF” to enable or disable daylight saving time function. In order to set a daylight saving time zone, you need to disable daylight saving first. Enable the daylight saving after finish setting the time zone. 23 (6) START TIME: To set the start time of daylight saving time. To set the start month of daylight saving time: Dial the jog to set the start month. JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC To set the start week of daylight saving time: Dial the jog to set the start week. LAST 1 ST 2 ND 3 RD 4 TH To set the start date of daylight saving time: Dial the jog to set the start date. THUSUN FRITUEMON WED SAT (7) END TIME: To set the end time of daylight saving time. To set the end month of daylight saving time: Dial the jog to set the end month. JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC To set the end week of daylight saving time: Dial the jog to set the end week. LAST 1 ST 2 ND 3 RD 4 TH To set the end date of daylight saving time: Dial the jog to set the end date. THUSUN FRITUEMON WED SAT To set the end time of daylight saving time: To set the end “FROM” time and “TO”time of daylight saving time. 24 (8) TIME SYNCHRONIZE: Select “ON”or “OFF” to enable or disable time synchronize which can let you have correct time automatically when network is connected. (9) TIME SERVER: You can set the time server address where you locate if you connect to network and enable time synchronize. For checking the IP address of NTP Server, please follow the steps: 1. Connect your PC to the internet for searching the IP address of NTP Server. 2. Go to “START” -> “RUN” -> type “Command” and press “OK” Under Dos Prompt, type “C:\Ping Pool.NTP.ORG to find out the IP address of NTP Server. (10) TIME ZONE: You can set the time zone where you locate if you connect to network and enable time synchronize. (11) TIME UPDATE BY: Once you enable the TIME SYNCHRONIZE, you can select the synchronization frequency by: DAY MONTHWEEK 25 3.2 CAMERA SETUP MENU In the CAMERA SETUP MENU, we define : (1) TITLE: The title setting allows you to assign a title to each camera input. Titling with 12 characters is supported in each channel. The available alphanumeric characters are: 0,1,2,3,4,5,6,7,8,9, A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z, ( ) . , + -/ and an empty space. (2) PTZ ID: Select PTZ ID from 001~255 or OFF. The default value is 10+N where N is camera’s number. This ID must be the same as the ID used in PTZ Dip Switch. (3) INSTALL/COVERT: For installation of camera; select “ON” to enable a camera, and “OFF” to disable it. For covert, select “ON” to cover a camera, and disable the screen in live mode to show up. However, the image is recorded, and can be played back by user who has playback right. The covert channels will not show up on the sequence mode. (4) SEQ(MAIN/CALL): Setup a retention period for sequences of the main/call monitor. 26 (5) REC QUALITY: Select an image quality for recording. Normal record image quality and event record image quality can be set individually. There are six different qualities available. A higher image quality needs more HDD space. The theory space needed per second lists below: ESTIMATE BIT SIZE SUPERIOR : 4.0 Mega Bit...
Эта инструкция также подходит к моделям:Видеонаблюдение - EDR1620 (1.01 mb)
Видеонаблюдение - EDR1640 (1.01 mb)