Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
ENABLE: To enable a buzzer when the fan does not work. DISABLE: To disable buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE and 1, where 1 means the alarm is enabled. (3) ALARM DURATION: PERMANENT (4) NETWORK ALARM: YES:To enable network alarm. NO: To disable network alarm. (5) SEND EMAIL: YES: Send an email when the fan does not work. NO: Do not send an email when the fan does not work. The email address can be set in the NETWORK SETUP MENU. 52 3.11.2 HDD TEMP. In HDD TEMP., we define: (1) BUZZER: HDD TEMPERATURE buzzer. ENABLE: To enable a buzzer when HDD’s temperature is over 70 ° C. DISABLE: To disable buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE and 1, where 1 means the alarm is enabled. (3) ALARM DURATION: PERMANENT (4) NETWORK ALARM: YES: To enable network alarm. NO: To disable network alarm. (5) SEND EMAIL: YES: Send an email when HDD’s temperature is overheated. NO: Do not send an email when HDD’s temperature is overheated. The email address can be set in the NETWORK SETUP MENU. (6) STOP RECORD: YES: Stop recording when HDD’s temperature is overheated. NO: Won’t stop recording even when HDD’s temperature is overheated. 53 3.11.3 NO HDD In NO HDD, we define: (1) BUZZER: NO HDD buzzer. ENABLE: To enable a buzzer when no HDD has been found. DISABLE: To disable buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE and 1, where 1 means the alarm is enabled. (3) ALARM DURATION: Buzzer noise and event record duration of an alarm, from 1 sec to 99 seconds. The default value is 5 seconds. (4) NETWORK ALARM: YES: To enable network alarm. NO: To disable network alarm. (5) SEND EMAIL: YES: Send an email when no HDD has been found. NO: Do not send an email when no HDD has been found. The email address can be set in the NETWORK SETUP MENU. 54 3.11.4 HDD FULL In HDD FULL, we define: (1) BUZZER: HDD FULL buzzer. ENABLE: To enable a buzzer when HDD is full. DISABLE: To disable buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE and 1, where 1 means the alarm is enabled. (3) ALARM DURATION: Buzzer noise and event record duration of an alarm, from 1 sec to 99 seconds. The default value is 5 seconds. (4) NETWORK ALARM: YES: To enable network alarm. NO: To disable network alarm. (5) SEND EMAIL: YES: Send an email when HDD is full. NO: Do not send an email when HDD is full. The email address can be set in the NETWORK SETUP MENU. 55 3.12 SYSTEM SETUP MENU In the SYSTEM SETUP MENU, we define : (1) SYSTEM VERSION: Current system firmware version. (2) SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the input signal type automatically from camera 1 while system is booting up. Users do not need to set it up. Note: The signal type is detected by the camera 1, so camera 1 input has to be connected. (3) LOAD/SAVE CONFIGURATION: YES: Dial the jog to enter the selection window, there are 4 options available: CANCEL, DEFAULT, LOAD, and SAVE. Select “CANCEL” for leaving the existing window. Select “DEFAULT” to load factory default values. Select “LOAD” to load saved setting from USB. Select “SAVE” to save existing settings to USB device. Press “SELECT” button from the front panel to confirm once the selection is made. Please note that a USB device has to be inserted properly before choosing “LOAD” or “SAVE” options. System will ask you to stop recording if you confirm to load default setting, to load saved setting or to save existing setting when the system is recording. NO: Press “ENTER” to leave “LOAD/SAVE CONFIGURATION”. (4) UPDATE SYSTEM SOFTWARE: Dial the jog to enter the selection window. YES: Select YES to update system software from USB by pressing SELECT to start. NO: Select NO for canceling updating by pressing SELECT to start. Note: 1. System will ask you to stop recording if you confirm to update when system is recording. 2. USB device must be inserted properly before updating system software. 3. Do not remove USB device when you are updating system software, it may cause crash to the machine. 56 Note: After upgrading system software, please do the following actions before recording: 1. Load System Default in System Setup Menu. 2. Delete disk in Disk Setup Menu. User Level and Right V. 1.0 LEVEL RIGHT LEVEL-3 LEVEL-2 LEVEL-1 NONE ACCESS ADMINISTRATOR OPERATOR GENERAL ---DISPLAY OK OK OK OK MODE OK OK OK OK ZOOM OK OK OK OK FULL OK OK OK OK SELECT OK OK OK NO SEQ OK OK OK NO CALL OK OK NO NO MENU OK NO NO NO COPY OK NO NO NO SEARCH OK NO NO NO PLAY OK NO NO NO STOP OK NO NO NO REV.PLAY OK NO NO NO REC OK NO NO NO PAUSE OK NO NO NO Note: The above table will be updated if there is any change. 58 4. RECORDING 4.1 INSTANT RECORDING Press the Record key to start recording immediately. •The recording rate, recording quality and recording speed can be set in the REC CAMERA SETUP MENU. •A “ RECORD ” sign appears in the record status bar. Press STOP key to stop instant recording. • The STOP key can be activated only in instant recording mode, but not available in the schedul...
Эта инструкция также подходит к моделям:Видеонаблюдение - 410H (1.93 mb)
Видеонаблюдение - EDR810H (1.93 mb)
Видеонаблюдение - 410M (1.93 mb)