Оценок - 3, средний балл: 3.7 ( )

Производитель: EverFocus Размер: 9.62 mb Название файла: Язык инструкции:

7. SET TEMPERATURE: When HDD’s temperature is higher than the temperature set here, all other active settings in HDD TEMP will take effect (BUZZER, ALARM OUTPUT, ALARM DURATION, NETWORK ALARM, SEND EMAIL, STOP RECORD). The default value is 60.C (140.F). 3.11.3 NO HDD In NO HDD, we define: Diagram 3.21 In NO HDD, we define: 1. BUZZER: NO HDD buzzer. ENABLE: To enable a buzzer when no HDD is detected. DISABLE: To disable NO HDD buzzer. 2. ALARM OUTPUT This will transmit a signal to another device. The setting of alarms are NONE = not activated, 1 = output signal 1 transmits, 2 = output signal 2 transmits, 3 = output signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the Jog Dial on the DVR. 3. ALARM DURATION The length of time the buzzer remains active. This can be set from 1 sec to 99 seconds or permanent. The default value is 5 seconds. 4. NETWORK ALARM YES: To enable network alarm. NO: To disable network alarm. 60 5. SEND EMAIL: YES: Send an email when no HDD has been found. NO: Will not send an email when no HDD has been found. The email settings can be set in the NETWORK SETUP MENU. 3.11.4 HDD FULL In HDD FULL, we define: Diagram 3.22 In HDD FULL, we define: 1. BUZZER: HDD FULL buzzer. ENABLE: To enable a buzzer when HDD is full. DISABLE: To disable HDD Full buzzer. 2. ALARM OUTPUT This will transmit a signal to another device. The setting of alarms are NONE = not activated, 1 = output signal 1 transmits, 2 = output signal 2 transmits, 3 = output signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the Jog Dial on the DVR. 3. ALARM DURATION The length of time the buzzer remains active. This can be set from 1 sec to 99 seconds or permanent. The default value is 5 seconds. 61 4. NETWORK ALARM: YES: To enable network alarm. NO: To disable network alarm. 5. SEND EMAIL: YES: Send an email when HDD is full. NO: Will not send an email when HDD is full. The email settings can be set in the NETWORK SETUP MENU. 62 3.12 System Setup Menu Diagram 3.23 Diagram 3.23 is a screen shot of the SYSTEM SETUP MENU. This menu is for setting up any additional options and restoring defaults to the digital recorder. In the SYSTEM SETUP MENU the following fields are defined: 1. SYSTEM VERSION: Current system firmware version. 2. SYSTEM VIDEO FORMAT: NTSC or PAL. System can automatically detect the input signal type from camera 1 while system is booting up. Users do not need to set it up. Note: Camera 1 input must be connected for the system to properly detect the video format. 3. LOAD/SAVE CONFIGURATION: YES: Turn the Jog to enter the selection window. There are 4 options available: CANCEL, DEFAULT, LOAD, and SAVE. Use the Jog Wheel to scroll through these options and press SELECT to confirm your choice. “CANCEL”: exits from selection window. “DEFAULT”: restores the factory default values. “LOAD”: uploads saved DVR configuration settings from USB. “SAVE”: saves the current DVR configuration settings to USB device. Note that a USB device must be inserted properly before choosing the “LOAD” or “SAVE” options. System will ask you to stop recording if you try to access any of these options while the system is recording. NO: Press “ENTER” key to move to next option. 63 4. UPDATE SYSTEM SOFTWARE: Turn the jog to enter the selection window. YES: Press SELECT on YES to update system software from USB. NO: Press SELECT on NO to cancel updating. Note: System will ask you to stop recording if you try to update while system is recording. USB device must be inserted properly before updating system software. Do not remove USB device when you are updating system software; it may cause the machine to crash. Power failure or machine being turn off during updating process may cause an abnormal start of the machine. After upgrading system software, please do the following actions before recording: 1) Load System Default in System Setup Menu. 2) Delete disk in Disk Setup Menu. 5. LANGUAGE System can be set in different languages. The available languages depend on the country or area, subject to change. Please consult your sales representative for the most updated information. 6. QUICK PLAY Allows the user to automatically play back the most recent video after pressing the PLAY button. ON: Enable quick play. Video starts playing from the set quick play time before the current time. OFF: Disable quick play. Video starts playing from the last playback point. TIME: Quick play time, from 1 ~ 59 min. The default value is 10 minutes. Note: The recommended quick play time is at least 10 minutes. If you set a quick play time shorter than this, the video may not be played because the video files are not yet available. 7. SYSTEM PASSWORD ENABLE YES: Select YES to enable the password function. NO: Select NO to disable the password function. 64 65 8. PASSWORD and RIGHTS: The different login passwords indicate the different level of users; no login name is necessary. Each number will replace the “*” sign w...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: