Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
apo.com NetBotz® Vibration Sensor (NBES0306) Installation Instructions Inventory 22-mm (7/8-in) hook and loop fastener (1) 203-mm (8-in) tie wrap (10) Vibration sensor with 3.65-m (12-ft) cable (1) Adhesive cable tie holder (5) Installation A © © Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz products. See your NetBotz product documentation for details. Note: The typical location for the vibration sensor is on a main support in the top half of the enclosure. Avoid installing the sensor near a cooling unit, which could cause the sensor to give false alarms. Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling. Customer support and warranty information is available at the APC Web site, © 2008 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners. 990-3376 5/08 990-3376...