Оценок - 4, средний балл: 4 ( )

Производитель: Elmo Размер: 3.67 mb Название файла: Язык инструкции:

Index Search Performing an Index Search To perform an Index search, follow these steps: 1. Click the Index Search button on the search control panel. The Index Search window appears on the time line: 2. On the Index Search panel, select Motion , Sensor, or Pre-Alarm as the indexing method. The image below shows you that motion occurred on Camera 01. 54 - ELMO USER MANUAL 2003G 3. Click on any frame number. The Time Line marker will jump to the time of that frame recording. PAC INTEGRATION 55 PAC INTEGRATION Setting up PAC Text Overlay Overview Your DVR can be configured to display and capture current PAC activity on any camera you configure for PAC support. Figure 39. PAC Text Overlay Setting up PAC Text Overlay To set up PAC Text Overlay on a camera, follow these steps: 1. Click the Setup button on the main screen. 2. Click the Text Overlay tab. 3. Select the camera on which you wish to see text overlay. 4. On the video window draw a rectangular box around the area for which you would like to see the text overlay. 5. Select Black/White for the text color. Selecting Intelligent will set the text color to the opposite color of the background. Example : If the background is dark the text color would be white. If the background is bright the text color would be black. 6. In Intelligent mode, adjust the Brightness according to desired background sensitivity. 56 - ELMO USER MANUAL 2003G 7. Select Show Text Overlay on Live Mode to display text inserter on live mode. 8. Enter the Number of Characters per line. 9. Set the Horizontal Start Position with respect to the rectangle's left edge. 10. Set the Vertical Start Position with respect to the rectangle's top edge. 11. Enter the Scroll Delay to determine the number of frames delayed when text scrolls up. 12. Enter the Number of Lines to display in the rectangle. 13. Enter the Text Delay Time. If there is no text input for a long time, the text will disappear automatically. ELMO DVR REMOTE 57 ELMO DVR REMOTE Introduction to your Remote Software Overview Your ELMO DVR Remote software is used to connect and manage multiple servers by using the internet or a local LAN connection. Most of the features provided in ELMO DVR Server are available in ELMO DVR Remote. This section will describe the features that are avialable only in ELMO DVR Remote. Starting your ELMO DVR Remote Softare To start your ELMO DVR Remote Software, double-click the ELMO Remote icon on your desktop: ELHO Ö ELMO Remote The following screen appears: Figure 40. ELMO DVR Remote Main Screen View Activates the camera once your system has connected to the server. 58 - ELMO USER MANUAL 2003G Search Searches for previous events that have been recorded remotely, onto your local hard drive, or to CD-R/CD-RW. Setup Loads the setup page to configure your ELMO DVR Remote features and functions. Connections Manages lists of remote servers you can connect to and manage. Disconnect Breaks the connection from a connected server. Multi-Site Allows a user to specify which cameras will be in each division, allowing cameras from different servers to be on the same screen. This is accomplished through drag and drop. RECEIVE Displays the progress of data transmission. IP Address Displays the IP address of the currently active server. Emergency Monitor Handles any sensor or controller motion events. Health Monitor When connected to a DVR through this application, you can view the current status of cameras (if there is video loss), control, and sensors. Intelli-Upgrader Allows you to upgrade the software on the DVR if it appears in the server list created with the remote software. K-Remote Backup Server Handles backup processes, and gives the option of cancelling any backup process. This MUST be running in order to perform remote backups. 2-Way Audio Allows the remote user to communicate via voice with anyone who may be at the server side. Table 3. ELMO DVR Remote Main Screen Features Managing your Servers Overview Before you can connect to a server you must create a connection with the connections list. You can manage a server located anywhere as long as you have internet access to that server. The server also should have a static IP Address or a Dynamic IP domain service such as Adding a server to your list of connections To create a new server, follow these steps: 1. Click the Connections button on the main screen. The following window appears: Adding a server to your list of connections 59 Figure 41. Server Connect Window 2. Click the Add button. The Insert to new site window appears: Figure 42. Creating a New Site Group The group (category) in which you would like to place the new server. Server Code A maximum of seven alphanumeric characters. Note: This must 60 - ELMO USER MANUAL 2003G match with your Server ID on the server software. Add Group Enables the user to add a Group. Server Name A descriptive name of your choice. IP addr...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: