|
Фрагмент инструкции
T-Harness Installation Models NIS-1 NIS-4 TOY-1 TOY-3 TOY-2 Step 1: Remove the trim panel below the steering column and knee bolster (if equipped) behind the trim panel. Step 2: Locate the factory ignition harness located below the steering column and unplug. Step 3: Plug the T-harness In between the factory ignition harness. Step 4: Route the T-harness so that It does not interfere with any moving functions of the vehicle. Step 5: Test all functions of the vehicle to make sure that all operations work according to OEM requirements. Step 6: Plug In the Remote Starter/Alarm module to the T-harness. Step 7: Test all functions of the Remote Starter/Alarm module and then secure the module into place with nylon tie straps. Step 8: Replace all panels In reverse order of removal. 225 Technology Way • Steubenville, Ohio 43952 800-878-8007...
Эта инструкция также подходит к моделям:Видеонаблюдение - NIS-4 (1.34 mb)
Видеонаблюдение - TOY-1 (1.34 mb)
Видеонаблюдение - TOY-2 (1.34 mb)
Видеонаблюдение - TOY-3 (1.34 mb)