Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Check the package contents against the list below. 2. AXIS 262+ overview. See page 4. 3. Make all cable connections. See page 4. 4. Set an IP address. See page 5. 5. Set the password. See page 7. Important! This product must be used in compliance with local laws and regulations. Package contents Item Models/variants/notes Network Video Recorder AXIS 262+ Power Supply Power supply 12 V DC Country specific power cables CD Axis Network Video Product CD, including installation tools and other software, product documentation Printed Materials AXIS 262+ Installation Guide (this document) Axis Warranty Document ENGLISH Page 4 AXIS 262+ Installation Guide AXIS 262+ Overview Front panel Disk indicator Power indicator Network indicator Status indicator Rear panel Power connector 9-pin I/O terminal Network Serial number Power button Factory setup adapterRS-232 connector connector button connector Connect the cables 1. Connect the video recorder to the network using a shielded network cable. 2. Optionally connect external input/output devices, e.g. alarm devices. See page 8 for information on the terminal connector pins. 3. Connect power, using supplied power adapter. 4. Check that the indicator LEDs indicate the correct conditions. See the table on page 10 for further details. AXIS 262+ Installation Guide Page 5 Set an IP address To make it accessible on the network, the AXIS 262+ must be assigned an IP address. The recommended method for setting IP addresses in Windows is AXIS IP Utility. This application is free and available on the Axis Network Video Product CD supplied with this product. Notes: • A network DHCP server is optional. • The AXIS 262+ has the default IP address 192.168.0.90 • If setting the IP address fails, check that there is no firewall blocking the operation. If you still experience problems refer to the NAT traversal section in the User’s Manual. AXIS IP Utility - single device/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually set a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 262+. Automatic discovery 1. Check that the AXIS 262+ is connected to the network and that power has been applied. 2. Start AXIS IP Utility. 3. When the video recorder appears in the window, double-click it to open its home page. 4. See page 7 for instructions on how to set the password. Set the IP address manually 1. Acquire an unused IP address on the same network segment your computer is connected to. 2. Click the button Set IP address using serial number and enter the serial number and IP address for the AXIS 262+. The serial number is located on the product label. 3. Click the Assign button and follow the instructions. ENGLISH Page 6 AXIS 262+ Installation Guide 4. Click Home Page button to access the video recorder’s Web pages. 5. See page 7 for instructions on how to set the password. Set the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. If already powered up, shut the AXIS 262+ down by pressing the power button on the rear panel. 3. Locate the serial number (S/N) on the AXIS 262+ label on the rear panel. 4. Open a command prompt on your computer and enter the following commands: Windows syntax Windows example arp -s