Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
•
•
•
Important Safeguards
Connections
T
Before Using
Connections / Initial Setup (Ready to Play)
Playback / Record on a Tape
Timer Recording
Location of Controls
imer Recording
Important Safeguards and Precautions
Congratulations
Please make all cable or antenna connections before plugging into the AC
Head Cleaning
Playback a Tape
Record on a Tape
Timer Recording
Remote Control Buttons
FOR YOUR SAFETY, READ AND RETAIN
OUTDOOR ANTENNA INSTALLATION
outlet.
on your new purchase! With proper use, this
ALL SAFETY AND OPERATING
1
SAFE ANTENNA AND CABLE CONNECTION
Old or damaged tapes may clog heads.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
dependable product will provide years of
1 Insert a tape.
If an outside antenna or cable system is connected to the
1 Insert a tape with a record tab (p. 3).
1 1) Press PROG*.
INSTRUCTIONS. HEED ALL WARNINGS IN
enjoyment. Please fill in the information below.
Video Head Clog Sensor
equipment, be sure the antenna or cable system is grounded
• Loose or peeling labels
THE MANUAL AND ON THE UNIT
Connecting
• VCR power comes on. “VCR” lights
2) Press to display program screen.
EJECT
DISPLAY
so as to provide some protection against built up static
(Serial number is on tag on back of VCR.)
Screen-right appears during
V I DEO HEADS MAY
may cause tape jam.
on Multi Function Display.
(Ejects tape)
(Displays VCR status)
NEED CLEAN I NG
•
charges and voltage surges.
play if clogging is detected.
PLEASE I NSERT HEAD
INSTALLATION
Initial Setup
Section 810 of the National
NEC - NATIONAL
If Auto VCR/TV (see p. 10 of
ELECTRICAL CODE
CLEAN I NG CASSETTE
• VCR power comes on. “VCR” lights
POWER
TV (mode)
ANTENNA
• Date of Purchase
1
POWER SOURCE CAUTION
LEAD IN
To remove screen, press PLAY. OR REFER TO MANUAL
For ANT./Cable
2
Example
TIMER PROG. LIST
1) Set record DATE,
Electrical Code, ANSI/NFPA
Advanced Operations book) is set to
WIRE
➛ VCR ➛ TV
DATE
START
STOP
CH
on Multi Function Display.
VCR
(Turns VCR off/on)
(Enables TV functions)
GROUND
IN FROM ANT.
Operate only from a power source indicated on
13 SAT --:-- --:-- --
press
to select:
Today
70 (in Canada, part 1 of the
CLAMP
• Dealer Purchased From
• Use “dry” type head
END : PLAY
TV
If Auto VCR/TV (see p. 10 of
“OFF,” press VCR/TV until “VCR”
TODAY
the unit or in this manual. If necessary, have
Canadian Electrical Code)
ANTENNA
1
•
VCR (mode)
DSS/CABLE mode
DISCHARGE UNIT
cleaning cassette only.
Connect cable from
SLP
1~31= one time,
lights on the Multi Function Display.
(NEC SECTION 810-20)
Advanced Operations book) is set to
your Electric Utility Service Company or Video
SELECT START DATE
provides information with
ELECTRIC
• Dealer Address
8 9
31
1
2
6
Location of Contr
(Enables VCR functions)
(Enables DSS/CABLE functions)
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
(Part No. NV-TCL30PT is recommended.)
Products Dealer verify the power source in your
(NEC SECTION 810-21)
Antenna/Cable to VCR’s IN
1 IN from
or DAILY= MON~ FRI,
“OFF,” press VCR/TV until “VCR”
respect to proper grounding
SELECT :
SET:
home.
GROUND CLAMPS
• Dealer Phone No.
• Follow cleaning tape instructions carefully.
ANT./CABLE
END : PROG
of the mast and supporting
lights on the Multi Function Display.
or WEEKLY= same time
SELECT / Selection Order
DAILY
VCR/TV
INPUT
POWER SERVICE GROUNDING
7
2
ELECTRODE SYSTEM
•
FROM ANT. jack.
2
POLARIZED OR GROUNDING PLUG
structure, grounding of the
Press CH
or NUMBER keys
(For TV or VCR mode)
(NEC ART 250, PART H)
• Model No. PV-V4603S
Excessive use of tape can shorten head life.
Accessories
each week and press .
(For LINE or channel)
As a safety feature, this Video product comes
lead-in wire to an antenna discharge unit, size
WEEKLY
WEEKLY
WEEKLY
2 Connect VCR’s OUT TO TV
OUT TO TV
to select the channel.
PLAY (Plays a tape)/
with either a polarized power cord plug (one
of grounding conductors, location of antenna discharge unit,
• Serial No.
Built-in Head Cleaner
2) Set remaining items,
(SAT)
(MON)
(SUN)
PROGRAM
A
C
blade is wider than the other), or a three-wire
T
connection to grounding electrodes and requirements for the
jack to TV’s ANT. IN jack
2 Press PLAY to play tape.
• For “LINE” input, see p. 9 of “Advanced
•
I
FAST FORWARD/SEARCH
O
(Displays Timer Program screen)
N
+
grounding type plug.
2
Clock Set
Operations” book.
press
to select and
R
grounding electrode.
A clean video head helps produce a clear
• If tape has no rec. tab (p. 3), auto play begins.
C
V
(Fast forwards tape/ forward visual search)
NUMBER Keys
POLARIZED PLUG CAUTION:
2
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER
with included RF Cable
VHF/UHF
Accessories
• If recording from a channel over 100, first
press to set START/ STOP times, CH (channel) or
picture. So, we have equipped your VCR with a
REWIND/SEARCH
(Selects channel directly)
This plug will only fit into an outlet one way. If you
LINES OR CIRCUITS
built-in, non-chemical head cleaning system that
accessory.
press 100 key then the other 2 digits.
LINE input (p. 9 of Advanced Operations book), and
(Rewinds tape/ reverse visual search)
cannot fully insert the plug, try reversing it. If it still
An outside antenna system should be located well away
Special Features During Play
Remote Control
ADD/DELETE
from power lines, electric light or power circuits and where it
Batteries 2 “AA”
will not fit, have an electrician install the proper wall
helps prevent clogging of the video heads.
tape speed (p. 3).
STOP (Stops tape)
(Adds or deletes a channel)
will never come into contact with these power sources if it
For DSS/Cable Box
outlet. Do not defeat the safety feature by tampering
LSSQ0388
➛ VCR ➛ TV
Cleaning is performed each time you load or
•
Forward/Reverse Scene Search
3
Remote keys
with the plug.
should happen to fall. When installing an outside antenna,
Head Cleaning
Press SPEED
Press PROG to end programming.
COMMERCIAL SKIP/
unload a video cassette.
ols (Remote Contr
extreme care should be taken to avoid touching power lines,
1 Connect your cable box’s
TV
IN FROM ANT.
PLAY, STOP, REW, and FF
GROUNDING PLUG CAUTION:
VCR
Cable TV
➛ Press FF or REW.
to select record speed (p. 3).
ZERO SEARCH
circuits or other power sources as this could be fatal.
• This feature is preventative only, If your video
Converter Box
•
function as
operation
This plug will only fit into a three-hole grounding
(Starts COMMERCIAL SKIP/ Zero Search)
Because of the hazards involved, antenna installation should
OUT jack to the VCR’s IN
➛ Press PLAY to release.
Select Channel
heads are seriously clogged, consider the use
outlet. If necessary, have an electrician install the
3 TIMER PROG. L I ST
To Enter More Programs
DT START STOP CH SPD
keys when menus are displayed.
be left to a professional.
After search has begun, each additional
13 2 : 00 P 3 : 20P 02 SLP
of a chemical non-abrasive head cleaning kit
Press
to select and
TAPE POSITION
proper outlet. Do not defeat the safety feature by
4 Press REC
FROM ANT. jack with an RF
-- -- : -- -- : -- -- --
ACTION
(Locates tape position)
A
tampering with the plug.
USING THE VIDEO UNIT
C
RF Coaxial
press of FF or REW changes speed as
-- -- : -- -- : -- -- --
or take your VCR to a Service Center.
T
to start recording.
I
O
IN from
N
+
-- -- : -- -- : -- -- --
R
press to set an unused program.
C
(Displays menu)
V
cable.
3
POWER CORD
If the unit has been in storage or moved to a new location, refer
Cable
ANT./CABLE
shown below.
CANCEL : ADD / DLT
OUT TO TV
• To edit, press PAUSE/SLOW to pause,
Then repeat step 2.
Make sure power cords are routed so that they
first to the INSTALLATION section of these safeguards.
SEARCH/ ENTER
LSJA0372
Cleaning the VCR
1
SELECT : SET :
2 Connect VCR’s OUT TO TV
[SLP] : Approx. 21X ↔ Approx. 9X
COUNTER RESET
EXIT : PROG
are not likely to have anything rest on them, roll
1
KEEP THIS VIDEO UNIT AWAY FROM WATER OR
and again to resume recording.
Or, press PROG to exit.
(Set search system /Tunes TV channel)
(Resets counter to zero)
over them, or be in the way of walking traffic.
MOISTURE OF ANY KIND.
[LP]
: Approx. 9X
Use soft, dry cloth or dusting attachment of a
jack to TV’s ANT. IN jack
↔ Approx. 7X
VHF/UHF
2
If an extension cord is used, make sure it also
2
IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
[SP] : Approx. 7X ↔ Approx. 3X
PAUSE/SLOW
has either a polarized or grounded plug and that
vacuum to remove dust from all cabinet vent
STRONG IMPACT, unplug the unit and have it inspected by
with included RF Cable
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
If at 21X, 9X, or 7X speed the picture is
(Displays still, frame by frame,
holes. You may moisten cloth with nonabrasive,
WARNING
5 Press STOP to stop recording.
the cords can be securely connected. Frayed
SPEED
a qualified service technician before use.
•
Loading Batteries
or slow motion picture)
cords, damaged plugs, and damaged or cracked
accessory.
antistatic cleaner/ polisher.
interrupted, change speed to 9X, 7X, or 3X.
(Changes tape speed)
3
DURING AN ELECTRICAL STORM
Over tightening “Nut type” RF coaxial cables
wire insulation are hazardous and should be
ol Buttons,
During a lightning storm, whether indoors or outdoors, or
•
Caution:
RECORD
replaced by a qualified service technician.
may damage jacks. Finger tighten only.
One Touch Recording
Playbac
before leaving the unit unused for extended periods of time,
Initial Setup (Ready to Play)
Notes
Overloaded outlets and extension cords are fire
Alcohol and various solvents could damage finish.
(Records a program, etc.)
disconnect all equipment from the power source as well as
(recording in progress)
Review, Replace, or Clear Program
Cancel a Timer Recording
hazards and should be avoided.
the antenna and cable system.
• Picture interruption may occur with some TVs.
SAP/Hi-Fi
Press REC repeatedly to set length as follows:
CHANNEL /
4
DO NOT BLOCK VENTILATION HOLES
Specifications
1 Turn TV on and tune to channel 3.
3 Settings are made automatically.
4
WHEN THE UNIT IS PLUGGED IN
• FF and REW search speed may vary
(Recording is not in progress)
(Recording is in progress)
(Selects audio mode for play or
TRACKING/ V-LOCK
Ventilation openings in the cabinet release heat
30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00
• Never expose the unit to rain or water. DO NOT
When setup is done, this screen
depending on current tape position.
record)
generated during operation. If they are blocked,
(Selects channel/ reduces picture
OPERATE if liquid has been spilled into the unit.
To order accessories, call toll free
Power Source:
120 V AC, 60 Hz
2 Plug VCR Power Cord into AC wall
➛ 4:00 ➛ exit.
heat build-up inside the unit can cause failures
appears.
Immediately unplug the unit, and have it inspected by a
noise during Play and Slow mode)
1-800-332-5368.
outlet. VCR comes on and auto
The VCR shuts off at the length set.
k
a 1) Press PROG.
Press POWER and then STOP within 10
VOLUME UP/DOWN
that may result in a fire hazard or heat damage
Power Consumption:Power On
Still (Freeze) Picture
(Adjusts TV volume)
F
service technician. Fire and shock hazards can result from
to cassettes. For protection, follow these rules:
Approx. 23 W
channel and clock set starts.
VCR CLOCK CHANNEL
•
2) Press to select LIST.
seconds to cancel the Timer Recording.
electrical shorts caused by liquid contact inside.
➛ Press PAUSE/SLOW.
Record
Record one station, watch another
r
a. Never cover ventilation slots or the unit while
• Never drop or push any object through openings in the
Power Off
6 /08 / 20 0 3 SUN 2 : 20PM
Loading the Batteries
(The TIMER indicator goes out on Multi
SHUTTLE Ring
ont
in use, or operate the unit when placed on a
• If screen below does not appear, check
DST : ON
unit. Some internal parts carry hazardous voltages and
Approx. 3.0 W
➛ Press PLAY to release.
Press VCR/TV
TIMER PROG. L I ST
Press
to select
(Variable speed search)
bed, sofa, rug, or other soft surface.
SETT I NG : CH 10
b DT START STOP CH SPD
contact can cause electric shock or fire hazard.
VCR - TV connection and, if TV is
(“VCR” goes out on Multi Function Display),
7 9 : 00A 12 : 00A 08 SP
Video Signal:
EIA Standard NTSC color
desired program.
Function Display.)
b. Avoid built-in installation, such as a book
8 10 : 00P 12 : 00P 02 SP
• Avoid placing the unit directly above or below your TV set
•
AUTO CLOCK SET
Frame by Frame Picture
V
tuned to channel 3, try switching it to
Video Recording
4 rotary heads helical
➛ select channels on TV (recording continues).
10 8 : 00P 9 : 00P 10 SP
case or rack, unless proper ventilation is
Pr
as this may cause electrical interference. Keep all
COMPLETED
SU 9 : 00P 10 : 00P L1 LP
Tower Universal Shuttle Remote Control
i
provided.
magnets away from electronic equipment.
System:
scanning system
channel 4.
➛ Press PAUSE/SLOW in Still mode.
ew of the
CANCEL : ADD / DLT
5
AVOID EXTREMELY HOT LOCATIONS OR
Select channels on VCR (in STOP or
•
EJECT button: Press to eject tape. EJECT is not available during recording.
5
USING ACCESSORIES
Audio Track:
1 track (Normal)
e
• To change VCR’s output channel,
➛ Press PLAY to release.
SELECT : SET :
A
SUDDEN TEMPERATURE CHANGES
v
EXIT : PROG
Use only accessories recommended by the manufacturer to
PAUSE mode)
2 channel (Hi-Fi Audio Sound)
Do not place the unit over or near any kind of
ent
please refer to “VCR’s Output Channel”
If “AUTO CLOCK SET IS INCOMPLETE”
avoid risk of fire, shock, or other hazards.
Tuner:
Slow Motion Picture
Press VCR/TV
uto Opera
heater or radiator, in direct sunlight, inside a
6
CLEANING THE UNIT
in Advanced Operations book (p. 12).
appears, manually set clock.
closed vehicle, etc.. Do not move the unit
Broadcast Channels:VHF 2 ~ 13, UHF 14 ~ 69
➛ Hold down PAUSE/SLOW in Still mode.
(“VCR” lights up on Multi Function Display),
c To Replace program...
Unplug the unit. Then, use a clean, dry, chemically
T
suddenly between areas of extreme temperature
See below.
CABLE Channels:
Midband A ~ I (14 ~ 22)
➛ select channels on VCR.
TIMER PROG. LIST
untreated cloth to gently remove dust or debris. DO NOT
a
➛ Press PLAY to release.
1) Press to display.
DATE
START
STOP
CH
variation. If the unit is suddenly moved from a
USE cleaning fluids, aerosols, or forced air that could over-
Superband J ~ W (23 ~ 36)
pe Erasur
VCR CLOCK CHANNEL
VCR)
cold place to a warm place, moisture may
7 SUN 9:00A 12:00A 08
2) Repeat Step 2
spray, or seep into the unit and cause electrical shock. Any
Hyperband AA ~ EEE
Notes
Notes
TODAY
condense in the unit and on the tape.
AUTO CLOCK SET IS
SP
substance such as wax, adhesive tape, etc. may mar the
(above) to set new
(37 ~ 64)
INCOMPLETE
SELECT START DATE
6
TO AVOID PERSONAL INJURY
cabinet surface. Exposure to greasy, humid, or dusty areas
• These features work best in SP or SLP mode.
• Watching one channel and recording
• Do not place unsecured
Lowband A-5 ~ A-1 (95 ~ 99)
tion
programs.
SELECT :
SET:
may adversely affect internal parts.
PLEASE SET CLOCK BY
• The sound will be muted.
another is not possible when using Cable
END : PROG
equipment on a sloping
Special CABLE channel 5A
PRESSING ACTION KEY
surface.
SERVICE
• To reduce picture noise, see “Manual
Box or DSS Receiver.
(01)
• Do not place this unit on any
1
DO NOT SERVICE THIS PRODUCT YOURSELF
Tracking Control” on p. 3.
Ultraband 65 ~ 94, 100 ~ 125
• After 5 minutes in Pause mode, VCR stops
or
support that is not firm, level,
If, after carefully following the detailed operating instructions,
e
Plugging the AC Power Plug into an AC outlet
Operating
• After VCR is in Still or Slow mode 3 minutes, it
and adequately strong. The
to protect the tape and the video heads.
this Video product does not operate properly, do not attempt
•
To Clear program...
Temperature:
5 °C ~ 40 °C (41 °F ~ 104 °F)
Front View of the VCR
unit could fall causing serious
to open or remove covers, or make any adjustments not
Specif
auto switches to Stop mode to protect the tape
injury to a child or adult and
Battery replacement caution
TIMER PROG. L I ST
described in the manual. Unplug the unit and contact a
Operating Humidity: 10 % ~ 75 %
and the video heads.
Press ADD/DLT.
DT START STOP CH SPD
damage to the unit.
qualified service technician.
• Do not mix old and new batteries.
VCR CLOCK CHANNEL
-- -- : -- -- : -- -- --
Weight:
2.7 kg (5.9 lbs).
• An appliance and cart combination should be
8 10 : 00P 12 : 00P 02 SP
2
IF REPLACEMENT PARTS ARE REQUIRED
• Do not mix alkaline with manganese batteries.
Manual Clock Set
10 8 : 00P 9 : 00P 10 SP
moved with care. Quick stops, excessive force,
Dimensions:
430 (W) x 98 (H) x 242 (D) mm
SU 9 : 00P 10 : 00P L1 LP
Make sure the service technician uses only parts specified
and uneven surfaces may cause the appliance
Cassette Compartment
STOP/EJECT
by the manufacturer, or those having the same safety
16-15/16” (W) x 3-7/8” (H) x
ica
3 Press STOP to stop tape.
This video recorder, equipped with
CANCEL : ADD / DLT
If Auto Clock Set was incomplete.
and cart combination to overturn.
SELECT : SET :
characteristics as the original parts. The use of unauthorized
Prevent Accidental Tape Erasure
9-9/16” (D) inch
• Carefully follow all operating instructions and
Press REW or FF in Stop mode to
HQ (High Quality) system, is
EXIT : PROG
substitutes may result in fire, electric shock, or other
tions
CH AUTO SET PROCEEDING
PLAY
use the manufacturer's recommended
Note: Designs and specifications are subject
hazards.
1 Press ACTION* on remote to display
Rewind or Fast Forward tape.
compatible with existing VHS
accessories when operating this unit or
Break off the tab to
To record again
to change without notice.
CANCEL : STOP
POWER
connecting it to any other equipment.
3
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY
CLOCK menu.
prevent recording.
Press EJECT on remote,
equipment. Only use tapes with the
d Press PROG to end the programming.
CHECK
Features for a Quality Picture
or STOP/EJECT on VCR to eject tape.
After any service or repairs to the unit, request the service
•
VCR CLOCK CHANNEL
mark. Only tapes tested and
Recor
technician to conduct a thorough safety check as described
FAST
VCR CLOCK CHANNEL
inspected for use in 2, 4, 6, and 8
in the manufacture’s service literature to ensure that the
Digital Auto Picture
1 / /
:
FORWARD/
video unit is in safe operating condition.
Video
AUTO CLOCK SET
hour machines are recommended.
DST:ON
Safety Precautions
Automatically controls the video output signal for
SEARCH
Input
less noise depending on the tape condition.
PROCEEDING
SELECT MONTH
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
d/Playback
Connector
Notes
SELECT : SET :
Digital Auto Tracking
Auto Operation Functions
moisture.
EXIT : ACT I ON
Record Tab
Cover the hole
REWIND/
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Continuously analyzes the signal and adjusts for
CANCEL : STOP
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
with cellophane
Auto Play
Audio Input
SEARCH
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
optimum picture quality.
be set to the Cable Box output channel and your Cable Box must be manually set to
tape.
If you use a cable box, turn it on and set it
2 Press to select the month and
Connector
CHANNEL UP/DOWN
Remote
RECORD
exposer cet appareil à la pluie ou à une humidité excessive.
Screw driver
Insert a tape
Manual Tracking Control
➛ Power comes on ➛ Play starts if there is no record tab (see p. 3).
the desired channel. The Cable Box must be left on.
to the Public Broadcasting Station (PBS)
to set. In the same manner, select and
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche
(L/R)
TRACKING/ V-LOCK
Sensor
(to reduce picture noise)
set the date, year, time, and DST
Auto Rewind
• If a power interruption occurs while programming the timer, the timer program(s) may be
channel in your time zone. If you use a
dans la borne correspondante de la prise et pousser jusqu’au fond.
Record/Playback Time
Use during Playback and Slow Motion mode to
(Daylight Saving Time).
Play
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears
DSS receiver, it must be turned off.
T
reduce picture noise.
➛
Multi Function Display
Tape end ➛ Rewind
on-screen, please re-enter the timer programs.
This symbol warns the user that uninsulated
ime
Fast Forward
Only use tapes with the
mark in this unit.
Press CH (TRACKING) / on the remote
VCR CLOCK CHANNEL
CAUTION
voltage within the unit may have sufficient
Notes
control or on the VCR until the picture clears up.
Play Auto Eject
RISK OF ELECTRIC SHOCK
magnitude to cause electric shock. Therefore,
DO NOT OPEN
Type of Video Cassette
6 /08 / 20 0 3
• Function buttons are inoperative during Initial
SUN 2 : 20PM
To return to Auto Tracking, press POWER off,
(Repeat Play must be off)
it is dangerous to make any kind of contact
Tape Speed
DST:ON
Important notes when using DSS receiver
with any inside part of this unit.
Setup.
then on again a few seconds later.
Play
Setting
T60
T120
T160
➛ Tape end ➛ Rewind ➛ Tape ejects if there is no record tab
SET COMPLETED
• To remove a cassette during Auto Set, press
• When recording programs via DSS receiver, DSS receiver must be left on.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
This symbol alerts the user that important
SP
2 Hours
EJECT on the remote or STOP twice on the
SET
:
• When recording programs via an antenna or cable, DSS receiver must be turned off.
DO NOT REMOVE COVER (OR BACK)
literature concerning the operation and
1 Hour
2 Hours
START
: ACT I ON
(Standard Play)
40 Minutes
VCR. In this case, settings must be made
NO USER-SERVICEABLE PARTS INSIDE
maintenance of this unit has been included.
R
R
manually. (See p. 12 of Advanced Operations
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Therefore, it should be read carefully in order
LP
5 Hours
R
R
R
R
book.)
3 Press ACTION to start clock and exit.
to avoid any problems.
2 Hours 4 Hours
R
R
*Important: If a remote control button does not work when pressed,
*Important: If a remote control button does not work when pressed,
(Long Play)
20 Minutes
• Depending on conditions, Auto Clock Set may
press the VCR button on the remote and try the button again.
press the VCR button on the remote and try the button again.
SLP
V-Lock Control (to reduce picture jitter)
take longer than 30 minutes. If so, press
3 Hours 6 Hours
8 Hours
FCC Warning: Any unauthorized changes or modifications to this equipment would void the
(Super Long Play)
In Still mode, CH (TRACKING) / operate as a
STOP to stop setup and perform settings
user’s authority to operate.
V-Lock control.
manually. (See p. 12 of Advanced Operations
- 2 -
- 3 -
book.)
- 4 -
- 5 -
- 6 -
- 7 -
V4603S Basic-2 (021224).p65
3
2003/01/06, 12:01
...