Оценок - 4, средний балл: 3.8 ( )

Производитель: Sony Размер: 1.16 mb Название файла: Язык инструкции:

position SET : SELECT : OK MENUEXIT : C AAB12 PROG. NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL OFF ON RETURN 51 SYSTEM D / K OK PLAY Press M/m to highlight CHANNEL SET, then press OK. TUNER C AAB12 PROG. NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING ON RETURN 51 SYSTEM D / K SELECT : CONFIRM : EXIT : OK MENU OK PLAY Press M/m to select the Canal Plus channels, then press OK. SET : SELECT : OK MENUEXIT : C LMN02 PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL OFF ON RETURN 1 SYSTEM D / K OK PLAY Press M/m to highlight PAY-TV/CANAL+, then press OK. TUNER PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL ON OFF RETURN 1 SYSTEM D / K SELECT : CONFIRM : EXIT : OK Getting Started MENU continued 39 Setting the Canal Plus decoder (not available on SLV-SE350K, SE500R, SE600N and SE700R) 14 14 OK PLAY Press M/m to highlight ON, then press OK. SET : SELECT : C LMN02 PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL ON ON RETURN 1 SYSTEM D / K OK EXIT : MENU 15 15 If the TV sound is distorted or noisy, press OK PLAY M/m to highlight SYSTEM and press OK. Then press M/m to select B/G or D/K so that you get better sound. MENUEXIT : TUNER PROG. NORMAL / CATV CHANNEL SET SYSTEM AFT FINE TUNING B / G D / K RETURN ON ON CONFIRM : SELECT : OK PAY - TV / CANAL+ 51 16 16 Press MENU to exit the menu. MENU Tip • If you want to return to the previous menu, highlight RETURN and press OK. Notes • The menu disappears automatically if you don’t proceed for more than a few minutes. • To superimpose subtitles while watching Canal Plus programmes, make both decoder-VCR and VCR-TV connections using 21-pin Scart cables that are compatible with the RGB signals. You cannot record subtitles on the VCR. • When you watch Canal Plus programmes through the RFU input of the TV, press t TV/ VIDEO so that the VIDEO indicator appears in the display window. *1 SLV-SE500K and SE800N/K only *2 SLV-SE700N/K only Setting the Canal Plus decoder (not available on SLV-SE350K, SE500R, SE600N and SE700R) Basic Operations Playing a tape Basic Operations 1 2 3 4 5 6 7 8 9 0 ZZZZEJECT CLEAR DISPLAY HHHHPLAY XXXXPAUSE M FF xxxxSTOP m REW NTSC PB Turn on your TV and set it to the video channel. Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. continued Playing a tape 3 3 OK PLAY Press H PLAY. When the tape reaches the end, it will rewind automatically. Additional tasks To Press Stop play x STOP Pause play X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape M FF during stop Rewind the tape m REW during stop Eject the tape Z EJECT To set the colour system If the playback picture has no colour, or streaks appear during playback, set COLOUR SYSTEM in the OPTIONS-1 menu to conform to the system that the tape was recorded in (see page 79). (Normally set the option to AUTO.) To play an NTSC-recorded tape Set NTSC PB at the rear of the VCR according to the colour system of your TV. When your TV is Set NTSC PB to PAL only ON PAL TV PAL and NTSC NTSC 4.43 To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter. VIDEOSP OPC To display the counter on the TV screen, press DISPLAY. Playing a tape Notes • The counter resets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • The time counter does not appear on the TV screen when using an NTSC-recorded tape. • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – The picture becomes black and white. – The picture shakes. – No picture appears on the TV screen. – Black streaks appear horizontally on the TV screen. – The colour density increases or decreases. • If you play back a tape in the LP or EP mode with the NTSC system, the sound becomes monaural. • While setting the menu on the TV screen, buttons for playback on the remote commander do not function. • The picture’s colour may be affected when playing a MESECAM-recorded tape in the LP mode.* * SLV-SE350K only Starting playback automatically with one button (One Touch Play) (not available on SLV-SE600N and SE700R) If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the TV to the video channel, and start playback automatically with one button. 1 Insert a tape. The VCR automatically turns on. If you insert a tape with its safety tab removed, the TV turns on and switches to the video channel. Playback starts automatically. 2 Press H PLAY. The TV turns on and switches to the video channel automatically. Playback starts. Tip • When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the video channel, and playback starts automatically in one sequence when you press H PLAY. Note • When you ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: