Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Видеомагнитофоны/видеоплееры - SLV-SE830N (905.6 kb)
Фрагмент инструкции
• You cannot watch programmes on the TV while recording unless you are recording a satellite or digital programme. • This function may not work with some types of satellite or digital tuners. • When the VCR is turned off, set the TV to the video channel. *1 SLV-SE830N *2 SLV-SE730N, SX730N, SE630N and SE430K AUDIO R/D L/G LINE IN Audio cable (not supplied) Scart cable (not supplied) LINE-3 (DEC/EXT)*1 or LINE-2 (DEC/EXT)*2 LINE OUT : Signal flow Getting Connecting the VCR 19 Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display, TV channels, guide channels for the ShowView system*, and VCR clock* automatically. Turn on your TV and set it to the video channel. 1 If your TV does not have a Scart (EURO-AV) connector, tune the TV to channel 32 (the initial RF channel for this VCR). Refer to your TV manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF channel” on page 22. Connect the mains lead to the 2 mains. The VCR automatically turns on, and the language abbreviations appear on the TV screen. The abbreviations of the languages are as follows: GB RU PL CZ HU SK TR SELECT : SET : OK EXIT : MENU Abbreviation Country Language CZ Czecho Czech HU Hungary Hungarian PL Poland Polish SK Slovakia Slovak TR Turkey Turkish RU Russia Russian 3 OK Press M/m/Эта инструкция также подходит к моделям:
Видеомагнитофоны/видеоплееры - SLV-SE630N (970 kb)
Видеомагнитофоны/видеоплееры - SLV-SX730N (969.98 kb)