Оценок - 2, средний балл: 3 ( )

Производитель: Sony Размер: 805 kb Название файла: Язык инструкции:

For details, see page 43. • In step 2, “FULL” will appear in the display window for about one minute, if: – there is no blank section available on the tape. – the remaining time of a blank section is less than one minute. • The VCR can only detect the blank section between the end of the tape and the end of the last recorded programme. Blank section Last recorded End of tape programme 34 Search Operations 01GB05SRH-ED313.p65 34 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Searching using the index function The VCR marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead of or behind the current position. You can either use the INDEX SEARCH buttons on the remote commander or the SEARCH MODE button and EASY TIMER knob on the VCR. Using the INDEX SEARCH buttons on the remote commander 1 Insert an indexed tape into the VCR. ./> INDEX SEARCH 2 Press ./> INDEX SEARCH repeatedly to specify how many index signals ahead or behind you want to search: • To search ahead, press >INDEX SEARCH. SEARCH INDEX 8 • To search backwards, press .INDEX SEARCH. The VCR starts searching and the index number on the TV screen counts down to zero. Playback starts from the point about five seconds ahead of the specified index mark. continued Search Operations 35 01GB05SRH-ED313.p65 35 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Searching using the index function (continued) Using the SEARCH MODE EASY TIMER button and EASY TIMER knob on the VCR knob SEARCH MODE 1 Press SEARCH MODE on the VCR repeatedly until “INDEX” appears in the display window (the SEARCH MODE indicator lights up). SP APC 2 Turn the EASY TIMER knob to specify how many index signals ahead or behind you want to search: • To search ahead, turn the EASY TIMER knob clockwise. • To search backwards, turn the EASY TIMER knob counterclockwise. SP APC 3 Push the EASY TIMER knob. The VCR starts searching. Playback starts (the SEARCH MODE indicator turns off) from the point about five seconds ahead of the specified index mark. To stop searching Press x STOP. Note • No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the channel during recording pause. 36 Search Operations 01GB05SRH-ED313.p65 36 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Searching using the Time Search function EASY TIMER You can easily find a specific point on a tape by using the Time Search function. For example, you can find a recorded section 15 minutes ahead of or behind the current position of a tape by using the Time Search function. SEARCH MODE 1 Press SEARCH MODE repeatedly until “TIME” appears in the display window (the SEARCH MODE indicator lights up). knob SP APC 2 Turn the EASY TIMER knob clockwise or counterclockwise to set the length of time you want the VCR to fast-forward or rewind the tape. Each turn on the knob increases or decreases the duration by 15 minutes. For example, if you want to watch a recorded section 15 minutes ahead of the current position, turn the EASY TIMER knob once clockwise. To change the time by one minute, press PROGRAM +/–. 3 Push the EASY TIMER knob. The VCR starts searching and the tape counter starts counting until it reaches the specified point. SP APC SP APC The VCR starts playback automatically when the tape counter reaches the specified point (the SEARCH MODE indicator turns off). To stop searching Press x STOP. Tip • The VCR can search up to three hours ahead of or behind the current position of a tape. Search Operations 37 01GB05SRH-ED313.p65 37 10/1/01, 14:25 SLV-ED313ME GB 3-065-583-11 (1) Additional Operations Playing/searching at various speeds .2 H PLAY y SLOW m REW M FF H PLAY M FF m REW Playback options Operation View the picture during fast- forward or rewind During fast-forward, hold down M FF. During rewind, hold down m REW. Play at high speed • During playback, press M FF or m REW on the remote commander. • During playback, hold down M FF or m REW. When you release the button, normal playback resumes. Play at twice the normal speed During playback or pause, press .2. Play in slow motion During playback or pause, press y SLOW. Play frame by frame During pause, press M FF or m REW on the remote commander. Hold down the button to play one frame each second. Rewind and start play While the tape is stopped, hold down m REW on the VCR and press H PLAY on the VCR. To resume normal playback Press H PLAY. Tips • Adjust the picture using TRACKING +/– on the VCR if: – streaks appear while playing in slow motion. – the picture shakes during pause. To set tracking to the centre position, press both buttons (+/–) at the same time. • If noise appears during pause or frame-by-frame playback, first switch to the slow motion playback, then adjust the picture using TRACKING +/– on the VCR. Notes • The playback sound is muted during these operations. • In LP o...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: