|
Фрагмент инструкции
In this case, select that programme position for the VCR picture. Refer to the instruction manual of your TV for details. Press RF CHANNEL. The TV system indicator appears in the display window. Press PROGRAM +/- to select the correct TV system. If your TV system is Select B/G G I I D/K K continued Getting Started 7 Getting Started Step 4: Tuning your TV to the VCR (continued) e.g. SLV-ED25PS/TH and ED15PS Selected TV system 5 Tune the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions. If the picture does not appear clearly, see "To obtain a clear picture from the VCR” below. 6 P RF CHANNEL Press RF CHANNEL. You have now tuned your TV to the VCR. From now on, whenever you want to play a tape, set the TV to the video channel. To obtain a clear picture from the VCR If the picture does not appear clearly in step 5 above, go to step 6 to finish this procedure once. Then start from step 2. After pressing RF CHANNEL twice in step 2 to display the RF channel, press PROGRAM +/- so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears. To set another RF channel number on the VCR, select a channel number that does not receive a broadcast signal in your area and is clear of interference from other channels. If you cannot obtain a clear picture after performing this procedure, we recommend you connect the VCR and TV using the audio/video cable (see "To a TV that has audio/video input jacks” on page 6). If the same symptom persists, consult your nearest Sony dealer. Note • If you set the wrong TV system, you may have no sound or sound may be distorted (noisy sound). 8 Getting Started Step 5 Selecting a language You can change the on-screen display language from English to Arabic. Before you start... • Turn on your TV and set it to the video channel. ® (M ©- QQ CD CD CD ‘0 '0 '0 '0 '0 '0 '0 '0 '0 0 '0 I/O MENU OK M/m 1 • I/O Press I/O (on/standby) to turn on the VCR. 2 Press MENU, then press M/m to move the cursor (►) to LANGUAGE and press OK. 3 Press M/m to select the desired language, then press OK. LANGUAGE /iiJ ENGLISH [♦+] jLisi [ OK ] MENU Getting Started 9 Getting Started Step 6 Presetting channels First, we recommend that you preset the receivable channels in your area using the One Touch Tuning function or the AUTO PRESET in the TUNER PRESET menu. Then, if some channels could not be preset automatically, set them manually; if there are any unwanted channels among the preset ones, you can disable the channels. Presetting all receivable channels using the One Touch Tuning function PROGRAM +/- / □ y a a 1 lla m ^ a]©° ONE TOUCH TUNING ONE TOUCH Press and hold ONE TOUCH TUNING on the VCR for more than TUNING three seconds. Q The VCR starts presetting the channels. SP /PC „///“/ T T I I 1 I T T T The WAIT indicator goes off when all receivable channels are preset. To check if the channels are preset correctly Set the TV to the video channel and press PROGRAM +/- on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/-, the channels are preset correctly. If the sound is distorted or noisy, the VCR is set to a TV system different from your area's. Select the correct TV system and preset channels using the TUNER PRESET menu as shown on the next page. Tip • To stop the One Touch Tuning function, press ONE TOUCH TUNING or ■ STOP on the VCR during the setting. 10 Getting Started Presetting all receivable channels automatically Before you start. • Turn on the VCR and the TV. • Set the TV to the video channel. MENU OK 1 Press MENU, then press M/m to move the cursor (►) to TUNER PRESET and press OK. TUNER PRESET PROG 1 SYSTEM • B / G D / K I NORMAL / CATV • NORM CATV AUTO PRESET ►CHANNEL SET 1 AFT • ON OFF FINE TUNING SELECT :[*+] SET : [++] 2 Press M/m/, to move the cursor (►) to SYSTEM, then select B/G, D/K or I, whichever is applicable in your area. If SYSTEM is set to the wrong position, the sound will be distorted or noisy. TUNER PRESET PROG 1 ►SYSTEM • B / G D / K I NORMAL / CATV • NORM CATV AUTO PRESET CHANNEL SET 1 AFT • ON OFF FINE TUNING SELECT :[f+] SET : [++] 3 Press M/m/, to move the cursor (►) to NORMAL/CATV, then select NORM. To preset CATV channels, select CATV. TUNER PRESET PROG 1 SYSTEM •B / G D / K I ►NORMAL / CATV • NORM CATV AUTO PRESET CHANNEL SET 1 AFT • ON OFF FINE TUNING SELECT :[f+] SET : [++] continued MENU Getting Started 11 Getting Started Step 6: Presetting channels (continued) 4 Press M/m to move the cursor (►) to AUTO PRESET, then press OK. All receivable channels are preset in numerical sequence. When no more receivable channels can be found, presetting stops and the picture from the lowest numbered channel is displayed on the TV ...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-ED15PS (725.1 kb)
Видеомагнитофоны/видеоплееры - SLV-ED25PS (725.08 kb)
Видеомагнитофоны/видеоплееры - SLV-ED25TH (725.08 kb)
Видеомагнитофоны/видеоплееры - SLV-ED33ME (725.08 kb)