Оценок - 3, средний балл: 4.7 ( )

Производитель: Sony Размер: 845.6 kb Название файла: Язык инструкции:

If you press the SEARCH button repeatedly, you can enter the index search or Time Search mode (for details, see pages 43 and 44). Notes • This SEARCH function will be cancelled (the SEARCH indicator turns off) if: – The VCR starts recording other programmes. – You press H PLAY, M # FF, m 3 REW or A EJECT button while the VCR is on. • With this SEARCH function, you can find the beginning of a programme recorded using the Easy Timer function only. Additional Operations ./> INDEX SEARCH Searching using the index function The VCR marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead of or behind the current position. You can either use the INDEX SEARCH buttons on the remote commander or the SEARCH button and EASY TIMER knob on the VCR. Using the INDEX SEARCH buttons on the remote commander 1 Insert an indexed tape into the VCR. 2 Press ./> INDEX SEARCH repeatedly to specify how many index signals ahead or behind you want to search: • To search ahead, press > INDEX INDEX 8 SEARCH. SEARCH • To search backwards, press .INDEX SEARCH. The VCR starts searching and the index number on the TV screen counts down to zero. The playback starts from the point about five seconds ahead of the specified index mark. Additional Operations Using the SEARCH button EASY TIMER and EASY TIMER knob on the VCR knob SEARCH 1 Press SEARCH on the VCR repeatedly until “INDEX” appears in the display window (the SEARCH indicator lights up). SP APC 2 Turn the EASY TIMER knob to specify how many index signals ahead or behind you want to search: • To search ahead, turn the EASY TIMER knob clockwise. • To search backwards, turn the EASY TIMER knob counterclockwise. SP APC 3 Press the EASY TIMER knob. The VCR starts searching. The playback starts (the SEARCH indicator turns off) from the point about five seconds ahead of the specified index mark. To stop searching Press x STOP. Note • No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the channel during recording pause. Additional Operations Searching using the Time Search function EASY TIMER knob You can easily find a specific point on a tape by using the Time Search function. For example, you can find a recorded portion 15 minutes ahead of or behind the current position of a tape by using the Time Search function. 1 Press SEARCH repeatedly until “TIME” appears in the display window (the SEARCH indicator lights up). SEARCH SP APC 2 Turn the EASY TIMER knob clockwise or counterclockwise to set the length of the time portion you want the VCR to fast-forward or rewind the tape. Each turn on the knob increases or decreases the duration by 15 minutes. For example, if you want to watch a recorded portion 15 minutes ahead of the current position, turn the EASY TIMER knob once clockwise. To change the time by one minute, press PROGRAM +/–. SP APC 3 Press the EASY TIMER knob. The VCR starts searching and the tape counter starts counting until it reaches the specified point. SP APC The VCR starts playback automatically when the tape counter reaches the specified point (the SEARCH indicator turns off). To stop searching Press x STOP. Tip • The VCR can search up to three hours ahead of or behind the current position of a tape. Additional Operations Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. If so, manually adjust the tracking. Press the TRACKING +/– buttons on the VCR to display the tracking meter. The distortion should disappear as you press one of the two buttons (the indicator lights up). To resume automatic tracking adjustment, eject the tape and reinsert it. NORMAL TRACKING – – – – – – – – – – – – – – – – – Tracking meter About the R2 (Reality Regenerator) function The R2 function automatically adjusts the picture to the most suitable quality during playback. When playback starts, the R2 function activates and the R2 R2 button lights up. Each pressing of the button changes the effect and indication in the display window as follows: SOFTREAL (status of playback started) DYNA (dynamic) continued Additional Operations Adjusting the picture (continued) About the Adaptive Picture Control (APC) function The Adaptive Picture Control (APC) function e.g. SLV-ED88ME/MJ/SG automatically improves recording and playback SET UP MENU quality by adjusting the VCR to the condition of AUDIO MIX ON • OFF APC •ON OFF PAL / MESECAMpicture quality, we recommend that you set APC to • AUTO PAL MESECAM the video heads and tape. To maintain better NTSC PBON in the SET UP MENU (with the APC indicator •ON PAL TV 4. 43 3. 58 SELECT : [ ] in the display window lit). SET :[ ] APC playback The APC function automatically works on ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: