|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Press MENU to select TIMER, then go to step 2. • To check, change, or cancel the programme setting, press , to choose LIST, then press OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 67). continued Basic Operations Recording TV programmes using the timer Notes • When setting the timer with VPS/PDC*3 signals, enter the start and stop times exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC function won’t work. • If the VPS/PDC*3 signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function. • The indicator flashes in the display window when you press ?/1 with no tape inserted. • The VPS/PDC function*3 is automatically set to OFF for the timer recording of a satellite programme. • The station name*1 may not appear if the VCR does not receive station name information signals. *1 not available on SLV-SE100A1/A2 *2 not available on SLV-SE100A1/A2 and SE200V1/V2 *3 not available on SLV-SE100A1/A2, SE250P, and SE450P Recording TV programmes using the timer Additional Operations Playing/searching at various speeds Additional Operations 1 2 3 4 5 6 7 8 9 0 M FF y SLOW .2 m H PLAY m REW M Playback options Operation View the picture during fast- forward or rewind During fast-forward, hold down M FF/M . During rewind, hold down m REW/m . Play at high speed • During playback, press M FF or m REW on the remote commander. • During playback, hold down M FF/M or m REW/ m . When you release the button, normal playback resumes. continued Playing/searching at various speeds Playback options Operation Play at twice the normal speed*1 During playback, press .2. Play in slow motion During playback, press y SLOW. Play frame by frame During pause, press M FF or m REW on the remote commander. Hold down M FF or m REW to play one frame each second. Rewind and start play During stop, press H PLAY on the VCR while holding down m on the VCR. To resume normal playback Press H PLAY. Tip • Adjust the picture using the TRACKING +/– buttons if: – Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing. To set tracking to the centre position, press both buttons (+/–) at the same time. Notes • The sound is muted during these operations. • In the LP mode*1, noise may appear or there may be no colour. • If the playback mode mark doesn’t appear on the TV screen, press DISPLAY. • The picture may show noise when playing at high speed in reverse.*2 *1 not available on SLV-SE100A1/A2 and SE200V1/V2 *2 SLV-SE100A1/A2, SE200V1/V2, SE250D/P, SX250D, and SE300D1/D2 only Playing/searching at various speeds Setting the recording duration time After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. z REC 1 While recording, press z REC. The indicator appears in the display window. Additional Operations SP VIDEO OPC 2 Press z REC repeatedly to set the duration time. Each press advances the time in increments of 30 minutes. 0:30 1:00 5:30 6:00 Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to the normal recording mode. To stop recording To stop the VCR while recording, press x STOP. Note • You cannot display the current tape time in the display window when setting the recording duration time. Setting the recording duration time Synchronized Recording (SLV-SE300D1/D2 and SE480D only) You can set the VCR to automatically record programmes from equipment such as a satellite tuner by connecting the equipment to the DECODER/LINE-3 IN connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from DECODER/LINE-3 IN. How to connect for Synchronized Recording Connect the DECODER/LINE-3 IN connector of the VCR to the TV Scart connector of the satellite tuner. Then connect the LINE-1 (TV) connector to the TV. Scart cable (not supplied) Satellite tuner, etc. DECODER/ t LINE-3 IN i LINE-1 (TV) TV Scart connector Scart cable (not supplied) Scart (EURO-AV) : Signal flow Synchronized Recording (SLV-SE300D1/D2 and SE480D only) Additional Operations Recording programmes using the Synchronized Recording function Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Set DECODER/LINE3 to LINE3 in the OPTIONS-2 menu (see page 75). SYNCHRO REC SP/LP 1 2 3 4 5 6 7 8 9 0 INPUT SELECT PROG +/– 1 Press INPUT SELECT or PROG +/– to display “L3” in the display window. 2 Set the timer on the connected equipment to the time of...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE100A2 (1.03 mb)
Видеомагнитофоны/видеоплееры - SLV-SE250D (1.03 mb)
Видеомагнитофоны/видеоплееры - SLV-SE250P (1.03 mb)
Видеомагнитофоны/видеоплееры - SLV-SE300D2 (1.03 mb)