Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Видеомагнитофоны/видеоплееры - SLV-SX730N (905.6 kb)
Фрагмент инструкции
Press MENU to select TIMER PROGRAMMING, then go to step 2. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 61. Notes • When setting the timer with VPS/PDC* signals, enter the start and stop times exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC function will not work. • If the VPS/PDC* signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function. • The and indicators flash in the display window when you press ?/1 with no tape inserted. • The VPS/PDC function* is automatically set to off for the timer recording of a satellite programme. * not available on SLV-SE630N and SE430K Basic Operations Recording TV programmes using the timer Additional Operations Playing/searching at various speeds Before you start… • Refer to “Index to parts and controls” for button locations. Playback options Operation View the picture during fast-forward or rewind During fast-forward, hold down M (fast-forward). During rewind, hold down m (rewind). Play at high speed • During playback, press M (fast-forward) or m (rewind) on the remote commander. • During playback, hold down M (fast-forward) or m (rewind). When you release the button, normal playback resumes. Play at twice the normal speed During playback, press .2. Play in slow motion During playback, press y SLOW. Play frame by frame During pause, press M (fast-forward) or m (rewind)* on the remote commander. * SLV-SE830N only To resume normal playback Press H (play). Using the shuttle ring (SLV-SE830N only) JOG With the shuttle ring, you can operate a variety of playback options. There are two ways for using the shuttle ring, normal mode and jog mode. Shuttle ring Playing/searching at various speeds To use the shuttle ring in normal mode During playback or pause, turn the shuttle ring clockwise or anticlockwise. Each change in the shuttle ring position changes the playback mode in the following way. Pause Slow motion in reverse Normal speed in reverse Double speed in reverse Slow motion Double speed Normal speed (Initial speed) High speed in High speed reverse To use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the picture one frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The frame shift speed depends on the speed you turn the shuttle ring. To resume normal mode, press JOG again. The JOG button turns off. Tip • Adjust the picture using the PROGRAM +/– buttons on the VCR if: –Streaks appear while playing in slow motion. –Bands appear at the top or bottom while pausing. –The picture shakes while pausing. To set tracking to the centre position, press both buttons (+/–) at the same time. Notes • The sound is muted during these operations. • In the LP mode, noise may appear or there may be no colour. • If the playback mode mark does not appear on the TV screen, press DISPLAY. • The picture may show noise when playing at high speed in reverse. • The picture returns to normal playback from slow motion in reverse in 30 seconds. Additional Playing/searching at various speeds Setting the recording duration time After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. Before you start… • Refer to “Index to parts and controls” for button locations. 1 While recording, press z REC. The indicator appears in the display window. 2 Press z REC repeatedly to set the duration time. In SP mode Each press advances the time in increments of 30 minutes. 0:30 1:00 4:00 4:30 Normal recording In LP mode Each press advan0:30 ces the tim1:00 e as shown below. 8:00 9:00 Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to the normal recording mode. To stop recording To stop the VCR while recording, press x (stop). Note • You cannot display the current tape time in the display window when setting the recording duration time. Setting the recording duration time Checking/changing/cancelling timer settings Before you start… • Turn on your TV and set it to the video channel. • Refer to “Index to parts and controls” for button locations. 1 Press ?/1 to turn on the VCR. 2 Press MENU, then press M/m to highlight TIMER PROGRAMMING and press OK. • If you want to change or cancel a setting, go on to the next step. PR DAY START STOP V/P 35 SA29 19 :00 20 :00 SP ON 21 :30– – 30 SA 6 12 :00 • If you do not need to change or cancel 29 SA29 21 :00 13 :30– – the se...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE430K (961.49 kb)
Видеомагнитофоны/видеоплееры - SLV-SE630N (961.47 kb)
Видеомагнитофоны/видеоплееры - SLV-SE730N (961.47 kb)