Оценок - 0, средний балл: 0 ( )

Производитель: Sony Размер: 1.46 mb Название файла: Язык инструкции:

During rewind, turn the ring to 0 REW. To return to the previous mode, release the ring. Locking in a high-speed During playback or pause, press Press · PLAY. picture # SEARCH or 3 SEARCH. To change direction, press < · PLAY (backward) or > (forward). DUAL MODE SHUTTLE Tip • Adjust the picture using $/4 TRACKING NORMAL/ SLOW STILL ADJUST if: – streaks appear while playing in slow motion – bands appear on the top or bottom while pausing – the picture shakes while pausing. Notes • If you use these functions in the LP mode, noise may appear or there may be no color. • When you view the picture of an NTSC-recorded tape in EP mode during fast-forward or rewind, “LP” may be displayed momentarily. Locking in a slow-During playback or pause, press motion & SLOW +/–. picture You can increase the playback speed with the + button and decrease the speed with the – button. To change direction, press < (backward) or > (forward). Playing frame by frame During pause, press 7 FRAME to advance the picture one frame or ' FRAME to reverse the picture one frame. Keep pressing the button to advance or reverse one frame every one second. Press · PLAY. Press · PLAY. Playing in reverse During playback, press <. Press · PLAY. Skipping a scene During playback, press SKIP. The VCR Pressing once skips about 30 automatically seconds. resumes normal playback. Rewind and restart play During stop, press · PLAY on the VCR while holding the DUAL MODE SHUTTLE ring on the VCR at the 0 REW position. 41-EN Additional Operations The VCR automatically adjusts the picture for the best possible Adjusting the picture playback or recording. If, however, you find the automatic adjustment unsatisfactory, you can adjust the picture manually. Adjusting the tracking Though the VCR automatically adjusts the tracking when playing a tape (the AUTO TRACKING indicator flashes in the display window, then lights steadily), distortion may occur if the tape was recorded in poor condition. If so, manually adjust the tracking condition. Press $/4 TRACKING NORMAL/SLOW to display the tracking meter. The distortion should disappear as you press one of the two buttons. If you cannot get a clear picture with manual adjustment, press TRACKING AUTO/MANUAL TRACKING AUTO/MANUAL to return to automatic adjustment. $/4 TRACKING NORMAL/SLOW NORMAL TRACKING APC Notes • Tapes recorded using the APC function are played back normally on VCRs that do not have the APC function. • Press P PAUSE to start recording after the APC indicator stops flashing. If you start recording before the APC indicator stops flashing, the APC function is cancelled. Tracking meter About Adaptive Picture Control (APC) Adaptive Picture Control (APC) automatically improves recording and playback quality by adjusting the VCR to the condition of the video heads and tape. To maintain better picture quality, press APC on the VCR so the APC indicator in the display window lights. APC To use APC during playback The APC function automatically works on all types of tapes, including rental tapes. You can play a tape using the APC function even if the tape was not recorded with it. To use APC while recording Whenever you insert a tape and first start recording, the VCR adjusts to the tape using the APC function (the APC indicator flashes rapidly). This adjustment is retained until the tape is ejected. There is a short delay before the VCR actually starts recording while the VCR analyzes the tape. If you want to start recording precisely the first time you record, set the VCR to recording pause mode (the APC indicator flashes slowly) and press r REC to let the VCR analyze the tape. When the APC indicator stops flashing, press P PAUSE to start recording. Recording begins immediately. To deactivate the APC Press APC on the VCR. The APC indicator in the display window goes off. 42-EN Additional Operations Searching using the index function The VCR automatically marks an index signal at the point where recording starts (with the exception of when you start recording from recording pause). Use this as a reference to find the beginning of the recording. Since the index number indicates the relative position from the current position, specify how many index signals ahead or behind the specific index signal is from the current position. 1 Open the drop down panel and insert an indexed tape into the VCR. 2 Press =/+ INDEX SEARCH repeatedly until the index number you want appears on the TV screen: • To locate succeeding programs, press + INDEX SEARCH. • To locate preceding programs, press = INDEX SEARCH. The VCR starts searching and the index number on the TV screen counts down to zero. Playback starts automatically = / + INDEX SEARCH from that point. INDEX 5 SEARCH 43-EN Additional Operations Game play MENU CURSOR > / . / ? / / EXECUTE Notes • Long game play sessions consume much battery power from the remote commander, and reduce battery life. • Due to discrepancies between television systems, the size of the game screen may dif...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: