Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
TV operation 6 6 Press or to select “SET”, then press ENTER. Now the ON TIMER is set. ENTER 7 7 Press MENU repeatedly until the menu screen is cleared. Notes: • The unit will automatically turn off approximately 1 hour later after the ON TIMER turns on. To continue watching the TV, press any button to cancel the one hour automatic shut off. •To cancel ON TIMER, follow above steps 1~5, then press or to select “CANCEL”. Press the MENU button repeatedly until the menu screen is cleared. • After setting the ON TIMER, “ OFF TIMER” will be highlighted. If you wish to set the OFF TIMER, press then follow the steps 4~6 on page 30. • If you want to correct the digits while setting, press or until the item you want to correct, then press or to correct the desired setting. 29 5Q10501A [E]p27-32 29 4/17/04, 11:57 AM TV operation TV operation To set the off timer This feature allows you to have the unit turn off automatically at a predetermined time. If you program the OFF TIMER once, the unit will automatically turn off at the same time everyday. 1 1 EXAMPLE: Turning off the TV at 11:30 PM. Press MENU. Press or to select option. You can also select ON/OFF TIMER by pressing PROGRAM twice. ENTER 2 2 Press or to select “ON/OFF TIMER”, then press . ENTER 3 3 Press or to select “OFF TIMER”, then press . ENTER 4 4 Press or to set the desired hour, then press . MENU PROGRAM / / / 5 5 Press or to set the desired minute, then press . 6 6 Press or to select “SET”. Now the OFF TIMER is set. ENTER 7 7 Press MENU repeatedly until the menu screen is cleared. Notes: • To cancel the OFF TIMER function: To cancel OFF TIMER, follow above steps 1~5, then press or button to select “CANCEL”. Press the MENU button repeatedly until the menu screen is cleared. • To confirm the ON/OFF TIMER: Press the PROGRAM button twice to indicate the programs on the screen. To set the off timer 30 5Q10501A [E]p27-32 30 4/17/04, 11:57 AM Picture control adjustment/ Adjusting the picture preference Picture controls are factory preset but you can adjust them individually as follows: CANCEL And also you can select four picture modes—Standard, Sports, Movie, and MENU Memory—as described in the following table: ENTER / / / Picture control adjustment Adjusting the picture preference 1 1 Press MENU, then press or to select option. ENTER 2 2 Press or to select “PICTURE”, then press . ENTER 3 3 Press or to select the item you want to adjust, then press or to adjust the setting. ENTER Selection Pressing BRIGHTNESS CONTRAST COLOR TINT SHARPNESS darker lower paler reddish softer lighter higher deeper greenish sharper Note: The CONTRAST default setting is set to maximum (+32) at the factory. After your desired setting press MENU4 repeatedly until the menu screen is cleared. 1 1 Press MENU, then press or to select option. TV operationENTER 2 2 Press or to select “PICTURE PREFERENCE”, then press . ENTER Press or to select the desired picture3 mode, then press ENTER. ENTER Mode Picture quality STANDARD Standard picture quality (factory-set) SPORTS Bright and dynamic picture (factory-set) MOVIE Movie-like picture setting (factory-set) MEMORY Your personal preferences (set by you; see “Picture control adjustment” as left) 4 4 After your desired setting press MENU repeatedly until the menu screen is cleared. 3 33333To return all adjustments to the factory preset levels Press CANCEL while making picture adjustments. 31 5Q10501A [E]p27-32 31 4/17/04, 11:57 AM TV operation TV operation Sound control adjustment/ Stereo and Second Audio Program (SAP) MENU AUDIO SELECT Sound controls are factory preset but you can adjust them individually as follows: CANCEL MTS broadcasts greatly enhance TV viewing by bringing you programs with high The unit is equipped with a feature known as multi-channel TV sound or MTS. fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmis / / / sion or for other purposes. Listening to stereo sound When the TV is turned on or a channel selection is made, make certain the “STEREO” appears on the screen. This means that Stereo broadcasting is avail- able. You can enjoy stereo sound from the left and right speakers. • When mono broadcasting is received, no indication is displayed. • If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO SELECT Sound control adjustment Press or to select “AUDIO”, then press .2 Press MENU, then press or to select option.1 ENTER To select desired sound STEREO SAP CH 013 STEREO CH 013 to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound. Listening to SAP (Second Audio Program) When the TV is turned on or a channel selection is made, make ce...
Эта инструкция также подходит к моделям:Телевизоры - MW24FPX (3.32 mb)