Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears. Note • If you set the wrong TV system, you may have no sound or sound may be distorted. Tuning your TV to the VCR If your TV has a Scart (EURO-AV) connector ? ????/1 1111 ON/STANDBY RF CHANNEL PROGRAM +/– Press ?/1 ON/STANDBY to turn on the VCR. ONSTAN AUTO ST UP Press RF CHANNEL on the VCR lightly. R CANNL The factory-preset RF channel appears in the display window. The VCR signal is output through this channel to the TV. Use the PROGRAM +/– buttons to set the RF channel to OFF, and press RF PROGRA TRACING CHANNEL again. AUTO ST UP R CANNL RF channel set up is complete. Getting Started 13 Tuning your TV to the VCR Step 5 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display, TV channels, guide channels for the ShowView system*, and VCR clock* automatically. AUTO SET UP PROGRAM +/– 1 1 AUTO ST UP Hold down AUTO SET UP on the VCR for more than three seconds. R CANNL The VCR automatically turns on, and the country abbreviation appears in the display window. PROGRA 2 2 Press PROGRAM +/– to select the abbreviation of your country from the TRACING table on page 15. For some countries, there is a selection of languages to choose from. If your country does not appear, select ELSE. Setting up the VCR with the Auto Set Up function AUTO ST UP Press AUTO SET UP lightly. R CANNL The VCR starts searching for all of the receivable channels and presets them according to the TV system you selected in “Tuning your TV to the VCR” on page 11. If you want to change the order of the channels or disable unwanted programme positions, see “Changing/disabling programme positions” on page 27. If you use the SMARTLINK connection (SLV-SE450K only), the Preset Download function starts and the SMARTLINK indicator flashes in the display window during download. After the search or download is complete, the current time appears in the display window for any stations that transmit a time signal. The abbreviations of the countries and languages are as follows: Abbreviation Country Language CZ Checho Czech HUN Hungary Hungarian PL Poland Polish SK Slovakia Slovak TR Turkey Turkish RUS Russia Russian ELSE Other countries English To cancel the Auto Set Up function Press AUTO SET UP. Tip • If you want to change the language for the on-screen display from the one preset in the Auto Set Up function, see page 21. Notes • If you stop the Auto Set Up function during step 3, you must repeat set up from step 1. • Whenever you operate the Auto Set Up function, some of the settings (ShowView*, timer, etc.) will be reset. If this happens, you have to set them again. * SLV-SE450K only Getting Started 15 Setting up the VCR with the Auto Set Up function Step 6 : Setting the clock You must set the time and date on the VCR to use the timer features properly. The Auto Clock Set function (SLV-SE450K only) works only if a station in your area is broadcasting a time signal. If the Auto Set Up function did not set the clock correctly for your local area, try another station for the MENU Auto Clock Set function. Setting the clock manually M/m/Эта инструкция также подходит к моделям:
Видеомагнитофоны/видеоплееры - SLV-SE400K (842.89 kb)
Видеомагнитофоны/видеоплееры - SLV-SE450K (842.89 kb)
Видеомагнитофоны/видеоплееры - SLV-SX100K (842.89 kb)