Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
To stop editing Press the p STOP buttons on both VCRs. Tip • To cut out unwanted scenes while editing, press P PAUSE on this VCR when an unwanted scene begins. When it ends, press P PAUSE again to resume recording. Note • If you start editing following the procedure above, the VCR won’t start recording with the OPC function. To record a tape with the OPC function, press rREC again during recording pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you press P PAUSE before the OPC indicator stops flashing, the OPC function is cancelled. Additional Operations Additional Information Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony service facility. Symptom Remedy Playback Clock Power The I/u ON/STANDBY switch • Connect the mains lead to the mains securely. does not function. The power is turned on but the • Moisture condensation occurs. Turn the power off, VCR does not operate. unplug the mains lead and leave the VCR to dry for over three hours. The clock has stopped and • The clock stops if the VCR is disconnected from the “–:– –” lights in the display mains for more than one hour. Reset the clock (and window. timer). The playback picture does not • Make sure the TV is set to the video channel. If you appear on the TV screen. are using a monitor, set it to video input. The picture is not clear. • Adjust the tracking with the TRACKING +/– buttons. • The video heads are dirty (see below). Clean the video heads using the Sony T-25CLD, E-25CLDR, or T25CLW video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Do not use a commercially available liquid type cleaning cassette other than Sony’s, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony service facility for more information. The picture is no colour. • The COLOUR SYSTEM in the OPTIONS menu is set to the wrong position. Set the option to conform to the system that the tape was recorded. Symptoms caused by contaminated video heads • Normal picture • Rough picture • Unclear picture • No picture (or black & white screen appears) initial terminal contamination Additional Information Timer recording Recording Playback Symptom Remedy The picture rolls vertically during picture search. • Adjust the vertical hold control on the TV or monitor. The picture has no sound. • The tape is defective. • If you made A/V connections, check the audio cable connection. No TV programme appears on the TV screen. • Make sure the TV is set to the video channel. If you are using a monitor, set it to video input. TV reception is poor. • Adjust the TV aerial. • Make sure the TV system is correctly set for your TV. • Make sure SYSTEM (B/G or D/K) in the TUNER menu is set to the same system in your local area. • Select the correct source with the INPUT SELECT button. Select a programme position when recording TV programmes; select “L1” when recording from other equipment. The tape starts playing as soon as it is inserted. • The safety tab has been removed. To record on this tape, cover the tab hole. The tape is ejected when you press rREC. • Check that the safety tab has not been removed. Nothing happens when you press rREC. • Make sure the tape is not at its end. The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a programme has been set for timer recording. • Make sure your timer settings have not already passed the current time. • The clock stops if the VCR is disconnected from the mains for more than one hour. Reset the clock and timer. continued Additional Information Troubleshooting (continued) Symptom Remedy A tape cannot be inserted. • Check that a tape isn’t already in the tape compartment. The remote commander does not function. • Make sure you are pointing the remote commander at the remote sensor on the VCR. • Replace all the batteries in the remote commander with new ones if they are weak. Others • Make sure the TV / VIDEO remote control switch is set correctly. The tracking meter does not appear on the TV screen. • The recording condition of the tape is very poor and tracking cannot be adjusted. • The tracking meter does not appear when playing back an NTSC-recorded tape. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. Additional Information Specifications System Channel coverage PAL (B/G, D/K) VHF E2-E12, R1-R12 UHF E21-E69, R21-R69 CATV S1-S41, S01-S05 RF output signal UHF channels 21 to 69 Aerial out 75-ohm asymmetrical ae...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE40EE (487.95 kb)