Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
When no more receivable channels can be found, presetting stops and the picture from the lowest numbered channel is displayed on the TV screen. TUNER PRESET PROG1 SYSTEM •I D/K B/G M NORMAL/CATV • NORM CATV ►AUTO PRESET CHANNEL SET 2 AFT • ON OFF FINE TUNING PLEASE WAIT Notes • If you connect the VCR to a TV with the NTSC colour system, the picture quality may be compromised during automatic presetting. A colour picture appears when presetting is complete. • The channel numbers besides CHANNEL SET may not be the same as those in your area. This is because this VCR's channel search system is based on the fixed TV system that has the widest channel coverage. If necessary, apply your local channel numbers to the programme positions (see "Changing programme positions" on page 35). continued Getting Started 19 Getting Started Manual setup — Presetting channels (continued) Presetting channels manually cd^S^cz} CD CD CD 0*0 '0 ‘0 a '0 '0 '0 cd*0 '0 '0 CD *0 0 0 • • _ U CD r»^> MENU EXECUTE CURSOR >/./?// PROG+/- 1 • MENU CD cursor Press MENU, then press CURSOR >/ . to move the cursor (►) to TUNER PRESET and press EXECUTE. • EXECUTE CD TUNER PRESET PROGIO SYSTEM •I D/K B/G M NORMAL/CATV • NORM CATV AUTO PRESET ►CHANNEL SET 3 AFT • ON OFF FINE TUNING SELECT : [ V♦] SET : [ Bb ] 2 Press CURSOR >/./?// to move the cursor cursor (►) to NORMAL/CATV, then select NORM. To preset CATV channels, select CATV. TUNER PRESET PROGIO SYSTEM •I D/K B/G M ►NORMAL/CATV • NORM CATV AUTO PRESET CHANNEL SET 3 AFT • ON OFF FINE TUNING SELECT : [ V♦] SET : [ bb ] 20 3 o • CURSOR I Press CURSOR >/. to move the cursor ^ (►) to CHANNEL SET. Getting Started TUNER PRESET PROGIO SYSTEM •I D/K B/G M NORMAL/CATV • NORM CATV AUTO PRESET ►CHANNEL SET 3 AFT • ON OFF FINE TUNING SELECT : [ V♦] SET : [ bb ] 4 prog Press PROG +/- to select the programme position. Selected programme 5 TUNER PRESET PROG14 SYSTEM •I D/K B/G M NORMAL / CATV • NORM CATV AUTO PRESET ►CHANNEL SET 4 AFT • ON OFF FINE TUNING SELECT : [ V ♦ ] SET : [ b b ] Press CURSOR / repeatedly until the • cursor channel you want is displayed. Pressing CURSOR ? goes back to the previous channels. The channels are scanned in the order shown on pages 24 to 31. If you know the number of the channel you want, press the programme number buttons. For example, for channel 5, first press "0" and then press "5." 6 If the TV sound is distorted or noisy, press cursor CURSOR >/./?// to move the cursor (►) to SYSTEM, then select either I, D/K, B/G, or M, whichever is applicable in your area. TUNER PRESET PROG14 ►SYSTEM •I D/K B/G M NORMAL / CATV • NORM CATV AUTO PRESET CHANNEL SET 4 AFT • ON OFF FINE TUNING SELECT : [ V ♦ ] SET : [ b b ] 7 • EXECUTE To allocate another channel to another programme position, repeat CD steps 4 and 5. 8 Press EXECUTE. Note • The channel numbers besides CHANNEL SET may not be the same as those in your area. This is because this VCR's channel search system is based on the fixed TV system that has the widest channel coverage. If necessary, apply your local channel numbers to the programme positions (see "Changing programme positions" on page 35). continued Getting Started 21 Getting Started Manual setup — Presetting channels (continued) Disabling unwanted programme positions After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/-buttons. You can also disable unwanted programme positions using the SET UP CH AND G-CODE menu (see page 32). 1 In step 5 above, press programme number button "0" twice to display the number "0" beside CHANNEL SET. 2 Press EXECUTE. Resetting the TV system (only for areas where various TV systems coexist) If the sound is distorted or noisy, or the color TV programme becomes black and white, etc., that channel may not be matched to the proper TV system. In this case, try the following steps. 1 Press PROG +/- to select the programme position that has the channel with above described conditions. 2 Press MENU, then select TUNER PRESET and press EXECUTE. 3 Select SYSTEM and select the TV system on which you can obtain the best sound and picture. 4 Repeat steps 2 and 3 for other positions you want to preset the TV system to. 5 Press EXECUTE. Checking the TV system Press PROG +/- to choose the programme position. The multi system indicator (I, D/K, B/G, or M) of the selected programme position's TV system lights up. Multi system indicators L 1 I® iS, <1 tf=ü (©©© ° 1 | ra- 0%^ 22 Getting Started If the picture is not clear Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function. 1 Press PROG +/- to select the programme number for which you cannot obtain a clear picture. 2...