Войти:
Оценок - 1, средний балл: 3 ( )

Инструкция по эксплуатации Sony, модель SLV-XF247ME

Производитель: Sony
Размер: 323.42 kb
Название файла: 3860880111.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Choose a channel between UHF 30 and 39 on the TV where there is no picture and no sound or only a steady rustling sound. This channel will now be referred to as the video channel. 3 Insert a tape recorded in the colour system matching your TV into the cassette compartment. The unit starts playing automatically if you insert a tape with its safety tab removed. 4 Press • PLAY on the unit. 5 Tune the TV until the video playback picture is clearly displayed on the TV screen. Refer to your TV manual for tuning instructions. You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel. If the playback picture does not appear clearly, see “To obtain a clear playback picture” on page 9. 8 Getting Started HJ To obtain a clear playback picture If the playback picture does not appear clearly in step 5 above, turn the RF CHANNEL screw on the rear panel of the unit with a screwdriver to a position where the TV clearly displays the playback picture. RF CHANNEL To select the TV system For your TV to receive the correct signal from your unit, you must set the TV SYSTEM switch on the rear panel of the unit to either G (for system B/G) or K (for system D/K). If this switch is set to the wrong position, the sound will be distorted. Getting Started 9 Getting Started Basic Operations Playing a tape 6 EJECT 3/# SEARCH II PAUSE ) FF • PLAY ■ STOP 0 REW 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The unit turns on, and starts playing automatically if you insert a tape with its safety tab removed. з Press • PLAY. When the tape reaches the end, it will rewind automatically. 10 Basic Operations Additional tasks To Press Stop play ■ STOP Pause play II PAUSE Resume play after pause II PAUSE or • PLAY Search forward FF or # SEARCH during playback Search backward ^0 REW or 3 SEARCH during playback Fast-forward the tape FF during stop Rewind the tape ^0 REW during stop Eject the tape 6 EJECT To set the colour system If streaks appear during playback, set COLOR SYSTEM on the unit to conform to the system that the tape was recorded in. (Normally set the switch to AUTO.) If your tape was recorded in Set COLOR SYSTEM to PAL PAL/MESECAM NTSC NTSC MESECAM PAL/MESECAM To play an NTSC-recorded tape Set NTSC PB on the unit according to the colour system of your TV. If your TV is Set NTSC PB to PAL ON PAL TV NTSC 4.4З NTSC 4.43 NTSC 3.58 NTSC 3.58 continued Basic Operations 11 Basic Operations Playing a tape (continued) Notes • Depending on your TV, the following may occur while playing an NTSC-recorded tape: - the picture is black and white, - the picture shakes, - no picture appears on the TV screen, - black streaks appear horizontally on the TV screen, and - the colour density increases or decreases. • You can eject a tape even when the power is off. When you press 6 EJECT, the unit turns on automatically. After ejecting the tape, the unit turns off again. • When the pause mode lasts for more than approximately five minutes, the unit will automatically enter the playback mode. • (SLV-XA147PS and XF247ME/PS only) You can play back tapes recorded in the SP mode only. • (SLV-XA147JE/MJ only) You can play back tapes recorded in the SP, LP, and EP mode. 12 Basic Operations Selecting the sound during playback (SLV-XF247ME/PS only) Press AUDIO MONITOR to select the sound you want. Each press of the button changes the indicator in the display window. When you play a tape recorded in stereo or with a bilingual sound track, the Hi-Fi Stereo indicator in the display window lights up. AUDIO MONITOR To listen to a Press AUDIO MONITOR until the Stereo tape's Bilingual tape's display window indicator shows Stereo sound Main and sub sounds L/R Left channel Main sound L Right channel Sub sound R Standard sound*1 Standard sound*2 No indication * Usually the mixed sound of left and right channels (monaural) *2 Usually the main sound (monaural) How sound is recorded on a video tape The unit records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Normal audio track (monaural) Hi-fi audio track — (main track) Stereo Usually mixed left/right channels Stereo sound (left/right channels) Bilingual Usually main sound ■V Main (left channel) Sub (right channel) Notes • To listen to playback sounds in stereo, you must use the AUDIO OUT connections. • When you play back a tape recorded in monaural, the sound is heard in monaural regardless of the AUDIO MONITOR setting. • You cannot select the sound to listen to while recording. continued Basic Operations 13 Basic Operations Playing a tape (continued) Turning on the unit and TV, and starting playback automatically (Trinitron TV Synchro Play) You can only use this function if your TV is made by Sony (Trinitron TV). ...

Эта инструкция также подходит к моделям:
Видеомагнитофоны/видеоплееры - SLV-XF247PS (323.4 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории