Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
SET UP CH AND G-CODE PROG CH GUIDE CH0 2 –––– 1 7 –––– 2 9 [ ] – ––– 3 10 –––– 4 28 – ––– SELECT GUIDE CH : [ ] ] CONFIRM : [ CH PLAY OK SET UP CH AND G-CODE PROG CH SELECT GUIDE CH GUIDE CONFIRM [ 9] : [ ] : [ ] 0 1 2 3 4 2 7 9 10 28 – – – – – ––– ––– ––– ––– 5 Press /. repeatedly to reset the “GUIDE CH” column to “---”. “---” appears between 1 and 255. • The VCR does not allow entering the guide channel number, if the same number has been set. • If you use a satellite tuner connected via the LINE-1 IN jacks, you do not have to set up the G-CODE guide channels. Just record a satellite programme using the G-CODE number, and the VCR automatically records the programme from the LINE-1 IN jacks. • When you record a satellite broadcast using the G-CODE number, you need to select the desired channel on the satellite tuner manually. Getting Started Getting Started 25 Changing/ disabling programme positions (SLVEZ44AZ/ EZ22AZ only) After setting the channels and G-CODE guide channels, you can change the programme positions as you like. If any programme positions are unused or contain unwanted channels, you can disable them. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. Changing programme positions e.g. Moving the programme position from 2 to 0. MENU OK M/m//. to move the cursor (B) to the row on which you want to disable. To display o...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-EZ22AZ (876.14 kb)
Видеомагнитофоны/видеоплееры - SLV-EZ44AZ (876.14 kb)