Оценок - 2, средний балл: 4 ( )

Производитель: Sony Размер: 910.21 kb Название файла: 3065677111.pdf Язык инструкции:

• The DISPLAY information appears on the TV screen indicating information about the tape, but the information won’t be recorded on the tape. • If you don’t want to watch TV while recording, you can turn off the TV. Notes • The DISPLAY information does not appear during still (pause) mode or slow- motion playback. • The DISPLAY information will not appear while playing an NTSC-recorded tape. continued Recording TV programmes • If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems. • When you insert a non-standard commercially available tape, the remaining time may not be correct. • The remaining time is intended for rough measurement only. • About 30 seconds after the tape begins playback, the tape remaining time will be displayed. • The station name* may not appear if the VCR does not receive station name information signals. * not available on SLV-SE610G Recording what you are watching on the TV (TV Direct Rec) (not available on SLV-SE610G) If you use the SMARTLINK connection, you can easily record what you are watching on the TV (other than tapes being played on the VCR). 1 Insert a tape with its safety tab in place. 2 Press z REC while you are watching a TV programme or external source. The VCR automatically turns on, then the TV indicator lights up and the VCR starts recording what you are watching on the TV. Tips • The TV indicator appears in the display window after you press z REC in some situations such as: –when you are watching a source connected to the TV’s line input, or –when the TV tuner preset data for the programme position is different from the data in the VCR tuner preset. • If there is a tape with its safety tab in place in the VCR, the VCR automatically turns on and starts recording what you are watching on the TV when you press z REC. • You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu (see page 77). Notes • You cannot record what you are watching using this method when the VCR is in the following modes; pause, timer standby, tuner preset, Auto Set Up, and recording. • When the TV indicator is lit in the display window, do not turn off the TV nor change the TV programme position. When the TV indicator is not lit, the VCR continues recording the programme even if you change the TV programme position on the TV. Recording TV programmes Recording TV programmes using the Dial Timer (SLV-SE810G only) The Dial Timer function allows you to make timer recordings of programmes without turning on your TV. Set the recording timer to record up to eight programmes, including settings made with other timer methods, that will be broadcast within the next month. The recording start time and recording stop time can be set at one minute intervals. Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Refer to “Index to parts and controls” for button locations. DIAL TIMER ?/1xX PROGRAM +/– Basic Operations Press DIAL TIMER. “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. DIAL TIMER VIDEO SP OPC VIDEO SP OPC Turn DIAL TIMER to set the recording date. DIAL TIMER SP OPCVIDEO continued Recording TV programmes using the Dial Timer (SLV-SE810G only) Press DIAL TIMER. DIAL TIMER 3 “START” and the current time appear alternately in the display window. VIDEO SP OPC VIDEO SP OPC Turn DIAL TIMER to set the recording start time. DIAL TIMER 4 You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM VIDEO SP OPC Press DIAL TIMER. DIAL TIMER 5 “STOP” and the recording stop time appear alternately in the display window. VIDEO SP OPC VIDEO SP OPC Turn DIAL TIMER to set the recording stop time. DIAL TIMER 6 You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM VIDEO SP OPC Recording TV programmes using the Dial Timer (SLV-SE810G only) Press DIAL TIMER. The programme position or station name appears in the display window. DIAL TIMER SP OPCVIDEO DIAL TIMER to set the programme position. To record from another source connected to one or more of the LINE inputs, turn DIAL TIMER Turn DIAL TIMER or press INPUT SELECT to display the connected line in the display window. VIDEO SP OPC INPUT SELECT Basic Operations Press DIAL TIMER to complete the setting. “OK” appears in the display window for about five seconds. The DIAL TIMER indicator appears in the display window and the VCR stands by for recording. To record from another source, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – bu...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: