Оценок - , средний балл:
(
)
)
Производитель: Panasonic
Размер: 13.38 mb
Название файла: PVV4022.PDF
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Channel Number - ----- LINE1 - ----- LINE2 Method 2: Press CH / . Display will change as below. 1 2 3 125LINE1 (CABLE) 69 (TV) orLINE2 •“L1” or “L2” lights on Multi-Function Display (about 4 sec.) when LINE1 or LINE2 is selected. • LINE1: For rear audio/video connection. LINE2: For front audio/video connection. If you cannot resolve the problem, please call the Customer Call Center for product assistance at 1-800-211-PANA (7262). To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). or send e-mail to : consumerproducts@panasonic.com Special VCR Features On-Screen Displays (OSD) • Special VCR Features • Copy Your Tapes (Dubbing) • Before Requesting Service On-Screen Displays (OSD) Function & Channel Displays Blank Tape/ No Video Signal Indications CH 0 8 When a function button is pressed, e.g. PLAY, or When blank tape is detected during play, you change channels, or the current channel has no signal (with a 5 second display Weak Signal Display feature (p. 10) set to appears. OFF), the TV screen will turn solid blue. VCR Status & Clock Displays To display or remove Function Status Current Time Channel overlay at right, . press DISPLAY*. Rec Time Remaining Counter (OTR mode only. See p. 5 of Basic Operations book.) Broadcast Audio REC 12: 00AM 0:25 CH02-0:12 :34 SPSTEREO SAPMONO Tape Speed Being Received (See p. 3 of Basic (For Model PV-V4522 only) Operations book.) Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. OSD Caution Page PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set... See page 6 of Basic Operations book TURN VCR OFF FOR TIMER RECORDING After a Timer Program has been set... See page 6 of Basic Operations book CHECK CASSETTE RECORD TAB If you press REC on the remote control or VCR, and a cassette is inserted with no record tab... See page 3 of Basic Operations book NO CASSETTE If you press PLAY, FF, REW, or REC on the remote control or VCR without a cassette inserted... See page 5 of Basic Operations book TO CANCEL TIMER REC PRESS POWER THEN STOP KEY If you press POWER or STOP during a Timer Recording... (visible in VCR mode only) See page 6 of Basic Operations book VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END :PLAY If head cleaning becomes necessary while playing back a tape... See page 3 of Basic Operations book VCR LOCK ACTIVATED If you press a function button other than STOP/EJECT or POWER while the VCR is in VCR Lock mode... See page 10 REMOTE CONTROL IS SET TO TV MODE USE VCR : VCR KEY If you press an invalid key on the remote while in TV mode... See pages 2, 10 Tape Position Display Feature To find out the present tape position. Tape position is displayed for VHS-C Cassettes type, tapes under 30 minutes, and some other tapes, but the position is not correct. 1 Press TAPE POSITION to detect tape position. BEGIN END DETECTING TAPE POSITION •“DETECTING TAPE POSITION” only appears the first time a cassette is inserted and it takes several seconds for correct indication to appear. • The present tape position indication is displayed. 2 Press TAPE POSITION to return to normal screen. Remote Warning ON/OFF Feature If Multi-brand feature is used (page 2), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV mode. 1 Press ACTION to display menu. VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT-OFF :OFF IDIOMA/LANGUE : ENGLISH VCR’ S OUTPUT CH :3 Press to select 2 REMOTE WARNING and press to set ON or OFF. • If “OFF,” remote warning will not appear if invalid key is pressed. 3 Press ACTION to return to normal screen. Auto Shut-Off Feature The power shuts off at a preset time. 1 Press ACTION to display menu. VCR CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUT OFF :OFF IDIOMA/LANGUE : ENGLISH VCR’ S OUTPUT CH :3 Press to select 2 AUTO SHUT-OFF. Press repeatedly to change shutoff time as shown below. OFF 2 Hours 4 Hours 6 Hours 3 Press ACTION to return to normal screen. Note • The shut-off countdown will not function during Play or Record. Weak Signal Display ON/OFF Feature When set to “ON,” picture is displayed regardless of signal strength. 1 Press ACTION to display menu. SELECT : EXIT : ACT I ON REPEAT PLAY :OFF REMOTE WARNING :ON AUTO SHUTOFF :OFF IDIOMA/LANGUE : ENGLISH VCR’ S OUTPUT CH :3 VCR CLOCK CHANNEL VCR CLOCK CHANNEL ANTENNA : CABLE AUTO SET WEAK SIGNAL DISPLAY : OFF SELECT : SET : EXIT : ACT I ON Press to select 2 and display CHANNEL. Press to select WEAK SIGNAL DISPLAY, and press to set ON or OFF. • ON: Picture is displayed despite signal condition an may have poor quality. OFF: Screen turns solid blue when signal is weak or non-existent. • Selecting ON has no effect on connected equipment with blue back feature. 3 Press ACTION to return to normal screen. VCR Loc...