Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Recordings equal 3. Enter 3 in step “2” and push REW. 1 so to „ ' ; ■" ; ;Jt 5 6 7 Example 2: If you are watching recording 2 and you want to watch recording 6, count the start points to number 6. Recordings equal 4. Enter 4 in step “2” and push FF. 1 o o If ' Bill 6 7 NOTE: I indicates start points of each recording. Index Scan This feature allows you to scan (forward or reverse) each recording for 10 seconds in Playback mode. INDEX Push INDEX in ; Playback or Stop mode. Push REW or FF to begin the scan. • As each index mark is reached, a short playback will be performed after which FF or REW resumes. Push PLAY to cancel the scan and begin playback. • You may also push STOP to stop the tape. Start here 4 & Current » Program (rEw[[*— Plish -4 FF t-H» s t Indexed Point •*r Play (for about 10 seconds) — Fast Forward or Rewind STOP 21 More You Can Do № S/c MTSJ5roadcast/Vffi^ (For Model PV-7450 only) Check list before you begin I] The VCR is connected to a stereo TV, or a mono TV and an external stereo amp or receiver with speakers. "3 The VCR and other components are plugged in and turned on. When recording, you may monitor in stereo, by connecting the VCR to either a stereo TV, or a mono sound TV with an external stereo amp and speakers. DISPLAY CD ftuiit ©1 ■B) o © CD © © © o © 0 © © O Equipped with dbx® -TV Noise Reduction for true MTS reproduction. dbx® -TV Noise Reduction is required for good stereo separation and audio fidelity, dbx® is a registered trademark, and is licensed by dbx* Technology Licensing. Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. Parenthesis indicate signal(s) not being received. The arrow indicates the selected audio mode. „ DISPLAY -Q Push DISPLAY to display the broadcast signal currently being received. MTS Stereo and SAP broadcast Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select STEREO or SAP audio mode. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. * If a stereo broadcast is weak and the display flickers, you may want to select the MONO audio mode for better results. SAP broadcast Secondary Audio Program (sub language) broadcast. Select SAP audio mode for the sub language. MONO broadcast Normal monaural sound broadcast. STEREO SAP MONO 12:00AM CH08 0:00:00 SLP •4 STOP 12 00AM CH08 0:00:00 SLP STEREO <4 (SAP) MONO STOP 12:00AM CH08 0:00:00 SLP (STEREO) SAP ^ MONO STOP 12:00AM CHO0 0:00:00 SLP (STEREO) (SAP) MONO < 22 With the proper audio mode setting, your VCR can: 1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi. 2) record and playback a monaural broadcast (main language) or Secondary Audio Program (sub language) on the Hi-Fi tracks for better quality monaural sound. 3) playback non Hi-Fi tapes in monaural. • When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as the normal monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs. Audio Mode for Recording О 0 0 0 0 0 0 0 © © @ SAPI Hi-Fi Push SAP/Hi-Fi repeatedly (each push within 5 seconds) to select the desired audio mode (STEREO, SAP, or MONO). Please refer to the “Receivable Broadcast Types" section on page 22. STEREO A SAP MONO The arrow indicates your selection. Do a recording. See the “Record On a Tape" section on page 16. Audio Mode for Playback Playback the tape. See the “Playback a Tape” section on page 15. SAP/ Hi-Fi Push SAP/Hi-Fi repeatedly (each push within 5 seconds) to select the desired audio mode (HIFI or NORMAL). Select “HIFI” to listen to your stereo recordings with stereo sound, or NORMAL for monaural sound. The arrow indicates your selection. When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will play back with true stereo sound. Standard stereo tapes will play back with monaural sound. In order to listen to Hi-Fi stereo playback, the VCR AUDIO (L/fl) jacks must be c mnected to a stereo TV or an external stereo amp and speakers. (See page 22.) When adjusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound. This is normal. There may be a difference in audio level between Hi-Fi and normal audio playback. 23 More You Can Do |==^j j;^^^^^^uItl-Braiid^^oiitro^JFeatiire The Remote Control may be set up to control some of the functions on your TV or Cable Box. TV Brand Code Numbers Panasonic............... ...............01,02 Sylvan ia.............. .........................05 JVC...................... ........................11 Quasar.................... ...............01,02 Sharp.................. ...................06, 07 ........................ 12 RCA......................... .....