Войти:
Оценок - 5, средний балл: 4.2 ( )

Инструкция по эксплуатации Panasonic, модель PV4664

Производитель: Panasonic
Размер: 1.75 mb
Название файла: PV4664.PDF
Язык инструкции:enes
Перейти к скачиванию



Фрагмент инструкции


COMMERCIAL ADVANCE™ marked recordings will play in non-COMMERCIAL ADVANCE™ VCRs, but commercials will not be advanced through. Does the marking process interfere with other programmed recordings? No. If the interval between 2 or more timer programs is not sufficient to mark the recording, marking will be done after all recordings are complete and the power goes off. What happens if 1 cancel the marking in progress so 1 can use the VCR? Marking will be resumed when the VCR’s power is turned off as long as the tape has not been ejected. What if part of my program is advanced through along with the commercials? Rewind the tape to where the program should have started, and push PLAY to view the program. Additional Notes: • Because of the various ways in which commercials are broadcast, the VCR may not be able to recognize all commercials. • If a timer recording is scheduled for the middle of the night, please be aware that the VCR will make some noise as it rewinds and fast forwards the tape while marking commercials. COMMERCIAL ADVANCE™ is a trademark of Arthur D. Little Enterprises. A Jerry Iggulden invention licensed by Arthur D. Little Enterprises. 23 Basic Operation Timer Recording Your VCR can be set up to do a recording while you are away or otherwise occupied. Up to 8 programs can be placed in memory. You can choose to record one time, daily, or weekly. S^Jheck list before you begin. O All connections are made. (See pages 6-9.) □ TV and VCR are plugged in and turned on. □ VCR/TV selector is set to “VCR." [H Clock is set to correct time. □ Record tab in place. (See page 5.) PROG Push PROG to display the program screen. • If a program is already in memory, use the Wheel to select an unused program number. I / START STOP CH *ÎteXî\ SLP ELECT START DATE BY ROTATING WHEEL : PUSH WHEEL-* TO ENO PUSH PROG KEY Rotate and push the WHEEL to select and set the DATE. WEEKLY (MON] Today's Date WEEKLY(SAT]i—7—►8-9—> 31-^ Example 1 Example Wheel Selection Order WEEKLYjSUN!-DALY—6" CLEAR ■B) o o o new* —'Y ff'w o e o <§) 0 Ö O © © © Qî © © © é* © © © Ö © © t>Q important notes when using a DSS receiver. • When recording programs via a DSS receiver the DSS receiver must be left on. • When recording programs via an antenna or cable, the DSS receiver must be turned off. Daily and Weekly Timer Recording If you want the program to be recorded daily (Mon thru Fri), enter DAILY in place of the DATE in step 2. If you want the recording to be on a weekly basis, enter WEEKLY MON, TUE, etc.. BY ROTATING WHÊÊL © Rotate and push the WHEEL to select and set remaining items at right. Remaining Items to be set: • START time • STOP time • CH(annel) number, or LINE for outside source recording. • Speed (SP, LP, SLP). To Make Corrections Repeatedly push the Wheel to move forward, or the CLEAR button to move back to the desired item. Push the WHEEL when program is completed. “PROGRAM COMPLETED” will appear on-screen. • If “PROGRAM IS INCOMPLETE" appears on-screen, check all entries and make necessary corrections. * If you enter a channel number of 100-125, the screen at right appears a few seconds later. Rotate and push the WHEEL to select “DSS” or “CABLE”. IS IT CABLE CHANNEL OR DSS RECEIVER CHANNEL? SELECT SET PEE CABLE ROTATE WHEEL PUSH WHEEL Push PROG to end the program. • If you want to enter more programs, select a blank program number with Wheel and repeat steps 2 and 3. P DT STRAT STOP CH SPO 2---- 3---- 4---- SELECT ENTER CANCEL END -8 :R01 PUSH PUSH PUSH rATE WHEEL WHEEL ¡LEAR KEY ROG KEY PROG Push PROG to exit this mode. VCR Push VCR POWER off to set the timer. • When recording programs via a cable box, make sure the cable box is left on. If the cable box cannot be controlled with the VCR, you must manually select the desired channel. Multi Function Display 24 Cancel a Timer Recording: (Recording js in progress) Multi Function Display 1 Push the VCR POWER button to release the VCR from timer mode. 2 Push the STOP button within 10 seconds of pushing the VCR Power button to cancel the recording. The TIMER indicator goes out in the Multi Function Display. Replace Program Contents: (Recording is not in progress) 1 Push the PROG button to display all currently set programs. 2 Rotate and push the Wheel to select and enter the desired timer recording. (See page 24.) 3 Rotate and push the Wheel to select and enter replacement information. 4 Push the PROG button to exit this mode and return to the normal TV screen. P DT STRAT STOP CH SPD 3 10 8 4 SU 9 SELECT ENTER CANCEL ENO OOP 9:00Pfcy


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории