Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
In the same manner, select and set the date, year, time, and DST. (Daylight Saving Time) 2/ 6/2002 WED 12:00PM SET : START : ACT I ON Reset all unit Memory Functions When moving unit to a new location, or if a mistake was made in the Initial Setup section. • Make sure a tape is not inserted in the unit. p Press and hold both PLAY and FF on the unit for more than 5 seconds. • The power will shut off. • Please ignore “NO CASSETTE” warning. 3 Do “Initial Setup” on page 8. 3 Press ACTION twice to start CLOCK and exit. ; f ufçr Mit «d1 1 POWER —ff© G) O O s© © ©j o © © ©* IO©© © 5©©o O <0>_o ACTION ©<2>5 CD©©© ©o ÖÖ -SELECT/SET ± :CH UP y :CH DOWN ► :VOL UP 4 :VOL DOWN Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 9 Initial Setup 1 Press ACTION to display MAIN MENU. ■ Language 1) Press AT4^ to select language icon. SELECT :*▼•<► SET : ACT I ON 2) Press ACTION repeatedly. MENU PRINCIPAL HOLA ELEGIR:* T ► FIJAR : ACT I ON For Spanish SEL. :* ▼ ■* ► REGLER :ACT I ON For French SELECT:* ▼ •« ► SET :ACT I ON For English 3) Press ATM ► to select “EXIT.” Press ACTION to exit. ■ Channels 1 ) Press ATM ► to select “CH.” MAIN MENU mr ___LARSÏ E3 » " CH CLOCK ~EXI SELECT:* ▼ •* ► SET ;ACTION 2) Press ACTION. SET UP CHANNEL j I I SET CLOCK ANIf-NNA • I CHANNEL CAPTION WEAK SIGNAL DISPLAY:OFF ! AUTO CLOCK SET TIME ZONE AO JUST :0 SELECT:* ▼ SET :► END : ACT ION j I SELECT:* ▼ SET :► END : ACT ION 3) Press AW to select “ANTENNA,’’then press ►to set your antenna system (■TV” or “CABLE”). 4) Press AT to select “AUTO SET,” then press ►. • After Channel Auto Set is finished, Clock Auto Set will be performed. (If clock is set manually, Clock Auto Set will not be performed.) ■ Clock 1) Press AW< ► to select “CLOCK.” SELECT:* T < ► SET tACTION 2) Press ACTION. (“TIME ZONE ADJUST appears only when auto clock is set.) 3) Press AT to select “MANUAL” or “AUTO CLOCK SET’ and press ►. • For Auto Clock Set, select “AUTO CLOCK SET,” then press CH ▲. SET CLOCK \ I / \|/ 21 6/2002 WED 12:00PM SELECT SET START * ▼ 4 ► ACTION 4) Press AT and press 4 ► to select and set the month, date, year, time, and DST {Daylight Saving Time). 5) Press ACTION twice to start the clock and exit this mode. 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumefproducts@panasonic.com Time Zone Adjust POWER- I Time Zone Adjust (Only when Auto Clock is set.) 1) Press AT^ ► to select “CLOCK.” SELECT:* v 4 ► SET : ACT I ON 2) Press ACTION. SET CLOCK AUTO CLOCK SET MANUAL TI ME ZONE ADJUST : 0 SELECT:* » SET :■* ► END :ACT ION 3) Press AW to select TIME ZONE ADJUSTand press < or ► to subtract or add hour(s)as necessary. AUTO CLOCK SET MANUAL TIME ZONE ADJUST :+1 SELECT SET END 4) Press ACTION twice to exit. oooo a© © ©I о © © ©I 5© © © © мм «еден o©® © ACTION NUMBER Keys •ADD/DLT WI Ш1ЯЭ« офо --SELECT/SET A :CH up O T :CH DOWN ► :VOL UP < :VOL DOWN ACTION key on the unit STOP/EJECT HEW/S1 SEI — ACTION-- On Unit You can operate the menu screen using unit buttons. To display the menu, press STOP/ EJECT and REW together with no tape inserted. To exit the menu, repeat above with or without tape inserted until normal screen appears. Using AWM ► keys VOL СH G0O0 On Unit ▲: CH UP T: CH DOWN ^: VOLUME UP <4: VOLUME DOWN Whenever the menu or program screen is displayed, CHANNEL UP/DOWN function as AT and VOLUME UP/ DOWN function as only. Add or Delete a Channel To add channel: Select channel with number keys and press ADD/DLT. CHANNEL 06 ADDED To delete channel: Select channel with CHAT or number keys and press ADD/DLT. CHANNEL 06 D£L£TE0 _J 11 Basic Operation Playback a Tape Record On a Tape l>XReady Check List □ All connections are made. □ Your unit is plugged in. 1 Insert a cassette. • The unit power comes on automatically. To prevent tape jam, remove loose or peeling labels from tapes. 2 Press PLAY. • Playback begins if cassette has no record tab. ■ Forward/Reverse scene search => Press FF or REW => PLAY to release. ■ Still (Freeze) picture => Press PAUSE/SLOW => Press PLAY to release. ■ Slow Motion picture => Hold down PAUSE/SLOW in Still mode => Press PLAY to release. ■ Frame by Frame picture => Press PAUSE/SLOW in Still mode -> Press PLAY to release. • These features work best in SP or SLP mode (models PV-C1342/PV-C1352W) and SLP mode (models PV-C1322/PV-C1332W). • After the unit is in Still or Slow mode for 3 minutes, it will switch to Stop mode automatically to protect the tape and the video head. ■ Stop => Press STOP ■ Rewind tape => Press REW in Stop mode ■ Fast forward tape => Press ...
Эта инструкция также подходит к моделям:Телевизоры - PV C1322 (1.2 mb)