Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Next-Generation HYPER ZTM Technology
I
TM
TM
Hierarchical Z-Buffer with Early Z Test.
Hardware Installation
nstalling MSI Live Update 3
Lossless Z-Buffer Compression (up to 48:1).
Fast Z-Buffer Clear.
TM
Follow the steps below to install the VGA card :
MSI Live Update 3TM is a useful utility for you to upgrade your MSITM mainboard and VGA
Z Cache optimized for real-time shadow rendering.
card. Thanks to the powerful capacity of this utility, you can conveniently download and
1. Remove the computer case.
Optimized for performance at high display resolutions, up to and including widescreen HDTV.
automatically update the BIOS and the drivers on-line, without spending much time in
2. Locate the PCI Express slot on your mainboard.
searching many Web sites to find the BIOS or drivers you want.
Warning: Inserting the VGA card into a wrong
AvivoTM Video and Display Engine
slot (e.g. AGP slot) may damage your card
Installing from the CD-Title
New advanced video capabilities, including high fidelity gamma, color correction and scaling.
(referto your mainboard manual for more
1. Insert the CD into the CD-ROM drive, and start the Setup program.
Dual independent display controllers that support true 30-bpp throughout the display pipe.
Information).
2. Click the Utility tab on the setup screen.
- Full symmetry on both heads.
3. Put the card directly over the
slot
PCI Express
TM
TM
- Each display controller supports display resolutions beyond 2560x1600.
and press one end of the card into the slot first.
3. Click the MSI Live Update 3 . Follow the on-screen instructions to complete the
Gently but firmly press the other end until it
Advanced DVI capabilities, including 10-bit, 16-bit HDR output.
Installation.
isfully seated in the slot.
YPrPb component output for direct drive of HDTV displays.
Seamless integration of pixel shaders with video in real time.
4. Secure the card with a bracket screw.
Installing from the MSITM Web Site
VIDEOSOAPTM noise removal filtering for captured video.
5. Install all other cards and devices and connect
1. Link to MSI's website at
MPEG1/2/4 decode and encode acceleration.
all the cables, and then install the case.
http://www.msi.com.tw
- DXVA support.
6. Connect the monitor. Now, you are ready to
2. Select /Download/ VGA on the upper part
- Hardware motion compensation, iDCT, DCT and color space conversion.
install the software on your computer.
of the MSI's homepage to enter
All-format DTV/HDTV decoding.
the Download page.
Adaptive per-pixel de-interlacing and frame rate conversion (temporal filtering).
3. Select Utility under the selections of VGA
on the left side of the web page.
CrossFireTM Support
4. Find and click MSI Live Update to
Lossless Z-Buffer Compression (up to 48:1). Multi-GPU technology ready.
download the utility.
Software Installation
R
Four modes of operation.
(for )
Windows
XP/ 2000
5. Unzip the downloaded utility first and then
- Alternate frame rendering for maximum performance.
install this utility by clicking on
R
- Supertiling for optimal load-balancing.
To install the driver of the VGA card to your computer running Windows XP or 2000, please
LiveUpdate.exe.
- Scissoring for compatibility.
follow the steps below:
6. Follow the on-screen instructions to
- Super AA for maximum image quality.
complete the installation.
1. Turn on the computer.
7. Launch MSI Live Update and to enter the
2. Insert the CD into the CD-ROM drive. The Autorun program will start the Setup program,
Anti-Aliasing and Anisotropic Filtering
main page of this utility as shown below.
The page of the MSI Live Update 3
TM
TM
and show the setup screen as follows:
2x/4x/6x
Anti-Aliasing
modes:
- Sparse multi-sample algorithm with gamma correction, programmable sample patterns,
and centroid sampling.
- New adaptive anti-aliasing mode.
U
TM
TM
sing MSI Live VGA Driver Update
- Temporal anti-aliasing.
- Lossless color compression (up to 6:1) at all resolutions, up to and including wide screen
HDTV.
Tip : If, on your computer, the
MSITM Live VGA DriverTM Update
2x/4x/8x/16x Anisotropic Filtering modes:
Autorun program does not execute
automatically, please 1) enable the
This service enables you to update the latest VGA driver for your VGA card.
- Up to 128-tap texture filtering.
CD-ROM drive Auto-detect function
TM
TM
TM
- Adaptive algorithm with performance and quality options.
1. To update the MSI Live VGA Driver , click Live VGA Driver item on the lef column of
from Control Panel; or 2) find and
the main page.
run the setup.exe file manually from
the CD.
2. This utility will start checking your platform and the information on the VGA card, and
display the information in a list.
3. Click the graph button on the bottom to connect MSI Live Update Series Server. Then, it
will automatically connect the Internet and compare the version of the driver in the
database.
4. It may take several minutes to detect the required drivers. Please wait while proceeding
3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the installation.
detection.
4. After finishing the installation, restart the computer as instructed.
5. Click the InstallShield Wizard button on the right side of the table to download and
update the driver. All actions will proceed automatically.
6. Follow the on-screen instructions to complete the updating procedure.
...