Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
26 - 3 1. Introduction 1.1. Features • Powered by NVIDIA® GeForceTM 9600 GSO Graphics Processing Unit (GPU) • Supports PCI Express 2.0 • Integrated with 512 MB GDDR3 memory • Supports DirectX 10 • Supports NVIDIA® SLITM (Scalable Link Interface) technology (Note) • Supports 2 DVI-I connectors • Supports HDMI connector (by optional adapter) • Supports 2 D-Sub connectors (by optional adapters) • Supports HDCP (High-Bandwidth Digital Content Protection) technology 1.2. Minimum System Requirements • Hardware -Intel® Pentium®/CoreTM 2 or AMD AthlonTM/PhenomTM -128 MB of system memory; 2 GB or more for best performance -Optical drive for software installation (CD-ROM or DVD-ROM drive) -A 550 Watt power supply or above is a must • Operating System -Windows® Vista -Windows® XP with Service Pack 2 (SP2) -Windows® XP Professional x64 Edition • SLI TM Configuration If you are planning on using this graphics card as part of an SLI system, the following are required: -An SLI certified motherboard with two PCI Express x16 slots and correct chipset driver -Two GV-N96GMC-512H -A power supply with 550-watt or above is recommended -An SLI bridge connector (Note) SLI technology requires a PCI Express motherboard with two x16 physical connectors. Graphics cards working in an SLI configuration must be with the same model name (e.g. GV-N96GMC-512H) and from the same vendor (e.g. GIGABYTE TECHNOLOGY). GV-N96GMC-512H Graphics Accelerator - 4 2. Hardware Installation 2.1. Board Layout HDTV NTSC / PAL TV Projector or Pb/AV Output Pr SLI Connector TV-Out DVI-I Connector 1 DVI-I Connector 2 Y TV-Out DVI-I Connector 1 DVI-I Connector 2 DVI-I to D-Sub Adapter (Optional) (Optional) NTSC / PAL TV Projector or S-Video Output Analog LCD Monitor Analog Monitor or Digital LCD Monitor DVI Output D-Sub Output HDMI TV DVI-I to HDMI Adapter (Optional) -5 -Hardware Installation Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system. The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding. DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS DAMAGED. In order to ensure that your graphics card can work correctly, please use official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might cause problem(s) on the graphics card. GV-N96GMC-512H Graphics Accelerator - 6 2.2. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card. Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. Make sure that the gold edge connector of the graphics card is securely inserted. Step 2. Replace the screw to fasten the card in place, and replace the computer cover. Step 3. Plug the display cable into your graphics card; then turn on the computer and monitor. To connect a flat panel directly to your graphics card, use the DVI-I connector. To connect a D-Sub monitor to the DVI-I connector, plug the DVI-I to D-Sub adapter into the DVI-I connector, then plug the monitor cable into the adapter. Or use the DVI-I to HDMI adapter to connect an HDMI Connect a flat panel monitor. To TV / VCR To Flat Panel Display Connect a D-Sub monitor via DVI-I to D-Sub adapter Connect a HDMI monitor via DVI-I to HDMI adapter After installation, remember to connect the power cable to your graphics card, or the system will not boot . Do not touch the card when it's operating to prevent system instability. -7 -Hardware Installation Step 4. To connect an HDMI TV, follow the steps below to enable the S/PDIF in function for the graphics card. 1. Connect the provided S/PDIF cable to the graphicscard. 2. Connect the S/PDIF cable to the motherboard. (the red wire connects to the S/PDIF out pin andthe black to the Ground pin) You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. How NVIDIA® SLITM (Scalable Link Interf...