Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
14 4. Troubleshooting Tips ................................................................................................ 22 5. Appendix ................................................................................................................ 23 5.1. How to Reflash the BIOS in MS-DOS Mode .............................................................. 23 5.2. Resolutions and Color Depth Tables ............................................................................. 24 5.3. Regulatory Statements ................................................................................................. 26 - 4 1. Introduction 1.1. Features • Powered by NVIDIA® GeForceTM GT 430 Graphics Processing Unit (GPU) • Supports PCI Express 2.0 • Integrated with 1GB DDR3 memory • Supports DirectX 11 • Supports 1 HDMI connector • Supports 1 D-Sub connector • Supports 1 DVI-I connectors • Supports HDCP (High-Bandwidth Digital Content Protection) technology 1.2. Minimum System Requirements • Hardware -Intel® Pentium®/CoreTM 2 or AMD AthlonTM/PhenomTM -128 MB of system memory; 2 GB or more for best performance -Optical drive for software installation (CD-ROM or DVD-ROM drive) -A 400 Watt power supply or above is a recommended • Operating System -Windows® 7 -Windows® Vista -Windows® XP with Service Pack 2 (SP2) -Windows® XP Professional x64 Edition -5 -Introduction 2. Hardware Installation 2.1. Board Layout 1.GV-N430OC-1GL DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector DVI-I Connector Digital LCD Monitor DVI Output HDMI TV Analog LCD Monitor Analog Monitor or HDMI Connector D-Sub monitor Connector (15-pin) GV-N430 Series Graphics Accelerator - 6 DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector 2.GV-N430OC-1GI DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector 2.GV-N430OC-1GI Digital LCD Monitor HDMI TV Analog LCD Monitor Analog Monitor or DVI Output DVI-I Connector HDMI Connector D-Sub monitor Connector (15-pin) -7 -Hardware Installation DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector 3.GV-N430-1GI Rev 2.0 DVI-I Connector D-Sub monitor Connector (15-pin) HDMI Connector 3.GV-N430-1GI Rev 2.0 Digital LCD Monitor HDMI TV Analog LCD Monitor Analog Monitor or HDMI Connector D-Sub monitor Connector (15-pin) Connector DVI Output DVI-I GV-N430 Series Graphics Accelerator - 8 Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Turn off your computer and unplug power supply. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system. The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding. DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS DAMAGED. In order to ensure that your graphics card can work correctly, please use official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might cause problem(s) on the graphics card. -9 - Hardware Installation 2.2. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card. Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. Make sure that the gold edge connector of the graphics card is securely inserted. Step 2. Replace the screw to fasten the card in place, and replace the computer cover. Step 3. Plug the display cable into your card; then turn on the computer and monitor. To connect a D-Sub monitor to your graphics card, use the D-Sub connector. To connect a flat panel display to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics card, use the HDMI connector. To HDMI Monitor To D-Sub Monitor To Flat Panel Display Connect an HDMI monitor Connect a D-Sub monitor Connect a flat panel display GV-N430 Series Graphics Accelerator - 10 3. Software Installation Notice the following guidelines before installing the drivers: 1. First make sure your system has installed DirectX 9 or later version. 2. Make sure your system has installed the appropriate motherboard drivers (for the motherboard drivers,...