Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 4.69 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
C Set it to PLAYER. (p. 43) The playback button does not work. • The tape has run out. C Rewind the tape. (p. 43) The playback picture is not clear or does not appear.*2) • The television's video programme position is not adjusted correctly. C Adjust it. (p. 50) • EDIT is set to ON in the menu settings. C Set it to OFF. (p. 138) • This video head may be dirty. C Clean the heads using the Sony V8-25CLD cleaning cassette (optional). (p. 181) There are horizontal lines on the picture or the playback picture is not clear or does not appear. *® The video head may be dirty. C Clean the heads using the Sony V8-25CLD cleaning cassette (optional). (p. 181) No sound or only a low sound is heard when playing back a tape. • The stereo tape is played back with HiFi SOUND set to 2 in the menu settings.*1) C Set it to STEREO. (p. 138) • The volume is turned to minimum. C Open the LCD panel and press VOLUME +. (p. 43) • AUDIO MIX is set to ST2 side in the menu settings.*1) C Adjust AUDIO MIX. (p. 138) The date search does not work correctly. *® • The tape has a blank portion in the recorded portion. (p. 94) The new sound added to the recorded tape is not heard.*1) • AUDIO MIX is set to ST1 side in the menu settings. C Adjust AUDIO MIX. (p. 138) *« DCR-TRV140E only *2) CCD-TRV107E/TRV108E/TRV208E/TRV408E only 154 Types of trouble and their solutions In the recording and playback modes Symptom Cause and/or Corrective Actions The power does not turn on. • The battery pack is not installed, or is dead or nearly dead. C Install a charged battery pack. (p. 18, 19) • The AC power adaptor is not connected to a wall socket. C Connect the AC power adaptor to a wall socket. (p. 23) The end search function does not work. • The tape was ejected after recording. • You have not recorded on the cassette yet. The end search function does not work correctly.*1 • The tape has a blank portion in the beginning or middle. The battery pack discharges quickly. • The operating temperature is too low. • The battery pack is not fully charged. C Charge the battery pack fully again. (p. 18, 19) • The battery pack is completely dead, and cannot be recharged. C Replace with a new battery pack. (p. 18) The remaining battery time indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. C Replace with a new battery pack. (p. 18) • The battery pack is not fully charged. • A deviation has occurred in the remaining battery time. C Charge the battery pack fully again. (p. 18, 19) The power goes off although the remaining battery time indicator indicates that the battery pack has enough power to operate. • A deviation has occurred in the remaining battery time. C Charge the battery pack fully again so that the indication on the battery remaining indicator is correct. (p. 18, 19) The cassette cannot be removed from the holder. • The power source is disconnected. C Connect it firmly. (p. 19, 23) • The battery pack is dead. C Use a charged battery pack. (p. 18, 19) The ffi and Z indicators flash and no functions except for cassette ejection work. • Moisture condensation has occurred. C Remove the cassette and leave your camcorder for at least 1 hour to acclimate. (p. 179) The remaining tape indicator is not displayed. • The ra REMAIN is set to AUTO in the menu settings. C Set it to ON to always display the remaining tape indicator. *1)DCR-TRV140E only (Continued on the following page) 155 Troubleshooting Поиск и устранение неисправностей Types of trouble and their solutions Others Symptom Cause and/or Corrective Actions Easy Dubbing does not function.*® • Your VCR and/or video camera recorder is not set correctly. C Make sure the input selector of the VCR is set to LINE. Also, make sure the power switch of the video camera is set to VTR/VCR (p. 103). • The IR SETUP code or PAUSE MODE is not set correctly. C Select the correct IR SETUP code and PAUSE MODE, according to your VCR. Then confirm VCR operation with the IR TEST function. (p. 103, 104) Digital program editing does not function.*2) • The input selector on the VCR is not set correctly. C Set the selector correctly, and check the connection between the VCR and your camcorder. (p. 111) • The camcorder is connected to DV equipment other than of Sony using the i.LINK cable (DV connecting cable). C Keep the connection, and follow the procedure on page 117. • Setting programme on a blank portion of the tape is attempted. C Set the programme again on a recorded portion (p. 120). • The synchronisation of your camcorder and the VCR is not adjusted. C Adjust the synchronisation of the VCR (p. 118). You cannot install the USB driver.*2) • Your camcorder was connected to your computer with the USB cable b...
Эта инструкция также подходит к моделям:Видеокамеры - CCD-TRV107E (4.69 mb)
Видеокамеры - CCD-TRV108E (4.69 mb)
Видеокамеры - CCD-TRV208E (4.69 mb)
Видеокамеры - CCD-TRV408E (4.69 mb)