Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
If manual tracking adjustments do not produce a clear picture, there may be a problem with the videotape. 5. Press REC; the REC button will light. 6. To pause recording, press STILL/SLOW. To resume recording, press REC. 7. To end recording, press STOP. © 2GG1 Directed Electronics, Inc. 11 Videocassette Tapes Always insert the videocassette window-side up with the arrow on the case pointing toward the VCR. Use only videocassette tapes marked European-standard PAL VHS videocassette tapes and S-VHS prerecorded videocassette tapes are not compatible. To prevent accidentally recording over previously recorded material, remove the Record Protect Safety Tab on the videocassette case after recording. To record a tape that has the Record Protect Safety Tab removed, place a piece of cellophane tape over the space from which the tab was removed. NOTE: The recording time available on a videocassette depends on Tape Speed (SP or SLP) and Cassette Type (T60 = 60 minutes at SP or 180 minutes at SLP; T120 = 120 minutes at SP or 360 minutes at SLP). Tape_SP (standard play) SLP (super longplay) T-12G 2 hrs б hrs T-16G 2 hrs, 4G minutes S hrs T-1SG 3 hrs 9 hrs Break off the plastic safety tab to prevent accidentally recording over important tapes. Cover the record protect space with cellophane tape to make a new recording. ABOUT VIDEOCASSETTES ■ In general, high-quality, brand name videocassettes last longer and provide a better picture. ■ Rewind your cassettes all the way so that the tape is not at a midpoint; this can extend the tape life. ■ Do not touch or splice the tape; this can damage the tape and playing such a tape can damage the VCR. ■ Do not take apart any cassette you plan to use again. ■ Do not put any object inside a videocassette and do not clean inside a videocassette; this can permanently damage the tape, making it unusable. NOTE: Keep cassettes from direct sunlight, heat, or extreme cold. Do not drop cassettes. Never touch the recording surface of the tape. 12 © 2GG1 Directed Electronics, Inc. Using Special Features FORWARD AND REVERSE PICTURE SEARCH While in Play mode, press REW or FF; to resume normal viewing, press PLAY button. FORWARD AND REVERSE JET SEARCH While in Play mode, press and hold REW or FF; Jet Search increases the tape speed 7 times if recorded at SP speed or 21 times for tapes recorded at SLP speed. To resume normal viewing, release the button. NOTE: While in Forward or Reverse Jet Search, audio is muted. STILL AND FRAME ADVANCE While in Play mode, press STILL/SLOW to stop on a single still frame. Press STILL/SLOW again to advance picture frame by frame. To resume normal viewing, press PLAY. Note: Using Still mode for more than five minutes stresses the tape and causes undue stress on the video heads; the VCR automatically disengages Still mode after five minutes have elapsed. SLOW MOTION PLAYBACK Press STILL/SLOW for more than two seconds for SLOW Motion Playback. Cleaning and Care ■ Disconnect the VCR from the power source before cleaning. ■ Do not use liquid or aerosol cleaners on or in the VCR. ■ Use a dry cloth to dust the VCR. ■ Keep the remote control with the VCR and secure it in such a manner that it is unlikely to be lost or damaged. ■ Keep liquids away from the VCR. A spill on the VCR can damage the electronics and cause electric shock or fire. VIDEO HEAD CLEANING If poor playback qualities (snow, distortion, streaking, etc.) develop and persist, the unit's videoheads may need cleaning. If necessary, purchase a head cleaning cassette. Do not clean the heads excessively. When using a head cleaning cassette, read all instructions carefully; incorrect head cleaning can permanently damage the video heads. IMPORTANT! DO NOT INSERT ANY OBJECTS INTO THE CABINET SLOTS; CONTACT WITH A VOLTAGE POINT INSIDE THE VCR CAN CAUSE DANGEROUS SHOCK OR MAY SHORT OUT PARTS AND CAUSE FIRE OR ELECTRIC SHOCK. © 2ÖÖ1 Directed Electronics, Inc. 13 Setting the Main Menu ON-SCREEN MENU Your VCR has on-screen menus that allow you to access and control the VCR's programmable features. You will use the buttons on the remote control to work with the on-screen programming. If the setup menu does not appear, make sure the TV is tuned to the same channel as the VCR output CH3/4 on the SETUP MENU of the VCR. If the VCR is in the TV mode, press TV/VCR on the remote control to set VCR to TV mode. To make all of the VCR's features available, set the VCR functions before playing or recording a tape. MENU О 4_ CIN I Сгл О MENU ON or OFF SHIFT T CURSOR ENTER Button ► RECORD SPEED....................(SP) AUTO REPEAT........................(OFF) AUDIO OUTPUT......................(STEREO) CHANNEL SETUP VCR OUTPUT..........................(3CH) [SHIFT/ENTER] [MENU] RECORD SPEED The VCR can record at two tape speeds. The slower speed (SLP) allows the VCR to record more program material on a tape. Tapes recorded at standard speed (SP) provide a clearer pict...