Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
39 Capturing photos from a movie ....................................................... 39 Saving images with an external device Saving images in external media (DIRECT COPY)........................................... 40 Creating a disc with a DVD writer, recorder.................................................. 42 GB Customizing your camcorder Using menus ....................................................................................... 48 Getting detailed information from the “Handycam” Handbook ......................... 54 Additional information Troubleshooting............................................................................... 55 Precautions......................................................................................... 57 Specifications ...................................................................................... 59 Quick reference Screen indicators.................................................................................. 63 Parts and controls ................................................................................. 64 Index................................................................................................. 67 Table of GB 12 GB Getting started Step 1: Charging the battery pack DCR-SR58E/SR68E/SR78E/SR88E DCR-SX33E/SX34E/SX43E/SX44E/SX53E/SX63E Battery pack DC IN jack DC plug AC Adaptor Power cord (Mains lead) CHG (charge) lamp To the wall outlet (wall socket) Battery pack DC IN jack CHG (charge) lamp DC plug AC Adaptor To the wall outlet (wall socket) Power cord (Mains lead) You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your camcorder. . Notes . You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder. 1 Turn off your camcorder by closing the LCD screen. 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). . Align the . mark on the DC plug with that on the DC IN jack. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. 4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder. . Tips . See page 61 on recording and playing time. . When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen. To remove the battery pack Close the LCD screen. Slide the BATT (battery) release lever (.) and remove the battery pack (.). DCR-SR58E/SR68E/SR78E/SR88E Getting GB DCR-SX33E/SX34E/SX43E/SX44E/SX53E/SX63E DCR-SX33E/SX34E/SX43E/SX44E/SX53E/SX63E Make the same connections as “Step 1: Charging the battery pack.” Even if the battery pack is attached, the battery pack is not discharged. Charging the battery pack abroad You can charge the battery pack in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range. Notes Do not use an electronic voltage transformer. . . Notes on the battery pack . . When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure that the (Movie)/ (Photo) lamps (p. 15), the access lamp (p. 19) are turned off. The CHG (charge) lamp flashes during charging under the following conditions: . . . . The battery pack is not attached correctly. The battery pack is damaged. The temperature of the battery pack is low. Remove the battery pack from your camcorder and put it in a warm place. The temperature of the battery pack is high. Remove the battery pack from your camcorder and put it in a cool place. . In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 5 minutes, to save battery power ([A.SHUT OFF]). Notes on the AC Adaptor . . . Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. GB Step 2: Turning the power on, and setting the date and time Step 2: Turning the power on, and setting the date and time Open the LCD screen of your camcorder. Your camcorder turns on. . To turn on your camcorder when the LCD screen is open, press POWER. POWER button MODE lamp 2 Select the desired geographical area with , then touch [NEXT]. / Touch the button on the LCD screen. . To set the date and time again, touch (MENU) . [Show others] . [CLOCK/ LANG] (under [GENERAL SET] category) . [CLOCK SET]. When an item is not on the screen, touch / until the item appears. 3 Set [SUMMERTIME], date and time, then touch The clock starts. ...
Эта инструкция также подходит к моделям:Видеокамеры - DCR-SX33E (2.85 mb)
Видеокамеры - DCR-SX34E (2.85 mb)
Видеокамеры - DCR-SX43E (2.85 mb)
Видеокамеры - DCR-SX44E (2.85 mb)