Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Operation flow b Notes • Only the Handycam Station is equipped with the COMPONENT OUT jack. • When the A/V connecting cable is used to output images, images are output with SD (standard definition) image quality. • The Handycam Station and your camcorder are both equipped with A/V OUT jacks. Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup. Do not connect A/V connecting cables to both the Handycam Station and your camcorder at the same time, as image disturbance may occur. • For details on connecting and dubbing recorded images to VCR or DVD/HDD recorders, see “Handycam Handbook” (PDF). Playing the image on a TV Switch the input on the TV to the connected jack. Refer to the instruction manuals of the TV. r Connect your camcorder and TV referring to [TV CONNECT Guide]. Touch (HOME) t (OTHERS) t [TV CONNECT Guide]. r Make the required output settings on your camcorder. Open the jack cover. HDMI OUT A/V OUT Handycam Station 15 Recording/Playback Names and functions of parts and controls 1 Power zoom lever To use the zoom, move the power zoom lever. Move the power zoom lever slightly for a slower zoom. Move it further for a faster zoom. During playback, you can magnify still images from about 1.1 to 5 times the original size (Playback zoom). • When you touch the screen during playback zoom, the point you touched will be displayed in the center of the displayed frame. 2 PHOTO button (p. 11) 3 POWER switch (p. 9, 11) 4 START/STOP button (p. 11) 5 Battery pack (p. 6) 6 (Movie)/ (Still) mode lamps (p. 11) 7 /CHG (charge) lamp Lights up while charging your camcorder, or flickers while charging the flash, and remains lit when the flash charging is complete. 8 (flash) button You can select the settings for the flash. 9 Grip belt (p. 12) 0 DISP/BATT INFO button You can switch the screen display when you press while the power is set to on. When you press while the power is set to OFF (CHG), you can check the remaining battery. qa BACK LIGHT button To adjust the exposure for backlit subjects, press BACK LIGHT to display .. To cancel the backlight function, press BACK LIGHT again. Handycam Station qs RESET button To initialize the settings (Reset), press RESET to initialize all the settings, including settings for date and time. qd LCD screen/touch panel To record in mirror mode, open the LCD screen 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2). qf (HOME) button (p. 20) qg Zoom buttons Press for zooming in/out. During playback, you can magnify still images from about 1.1 to 5 times the original size (Playback zoom). • When you touch the screen during playback zoom, the point you touched will be displayed in the center of the displayed frame. qh Memory Stick Duo slot (p. 10) qj Access lamp When the access lamp is lit or flashing, your camcorder is writing or reading data on the “Memory Stick PRO Duo.” qk (Film Roll Index) button (p. 13) ql (VIEW IMAGES) button (p. 13) wd EASY button (p. 12) wf Speaker Sound comes out from the speaker while playing back. wg NIGHTSHOT switch To record in dark places, set the NIGHTSHOT switch to ON ( appears). wj Hook for a shoulder belt Attach the shoulder belt (optional). wk Internal microphone Records sound on movies. Sound picked up by the internal microphone is converted to 5.1ch surround sound and recorded. wl Flash Flashes when using the flash. e; Lens (Carl Zeiss Lens) ea Camera recording lamp Lights up in red during recording. Flashes when remaining “Memory Stick PRO Duo” space or battery power is low. es Remote sensor/Infrared port Receive the signal from the Remote Commander. ed Tripod receptacle (Bottom surface) Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle using a tripod screw. ef BATT (battery release) lever (p. 7) Connecting to other devices w; HDMI OUT (mini) jack Connect an HDMI cable (optional). wa A/V OUT jack Connect the A/V connecting cable. ws DC IN jack wh Active Interface Shoe The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. eg DISC BURN button Create a disc by connecting the camcorder to a computer. For details, see “Picture Motion Browser Guide.” eh Interface connector ej (USB) jack Connect the USB cable. ek COMPONENT OUT jack Connect the component video cable. Recording/Playback 17 Indicators displayed during recording/playback Recording movies Recording still images Viewing movies Viewing still images A Recording quality (HD/SD) and Recording mode (XP/HQ/SP/LP) B HOME button C Remaining battery (approx.) D Recording status ([STBY] (standby) or [REC] (recording)) E Counter (hour/minute/second) F OPTION button G Dual Rec H VIEW IMAGES button I Face Index Set J 5.1ch surround recording K Quality ([FINE]/[STD]) L Image size M This appears while a still ima...
Эта инструкция также подходит к моделям:Видеокамеры - HDR-CX6EK (2.51 mb)
Видеокамеры - HDR-CX7EK (2.51 mb)