Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Sony, модель HDR-PJ780E

Производитель: Sony
Размер: 3.29 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


You cannot use the NP-FV30 “InfoLITHIUM” battery pack with your camcorder. In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 2 minutes, to save battery power ([Power Save], p. 54). GB 1 Charging the battery using your computer Charging the battery using your computer Built-in USB Cable To the wall outlet (wall socket) To charge the battery using an AC-UD10 USB charger/AC Adaptor (sold separately) You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CPAH2R, CP-AL, or AC-UP100 portable power supply device (sold separately) to charge the camcorder. Charging time Approximate time (min.) required to fully charge a fully discharged NP-FV50 battery pack (supplied). When using the AC Adaptor: 155 min. When using your computer connected with the Built-in USB Cable*: 280 min. . The charging times shown above are measured when charging the camcorder at a room temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F). * The charging times are measured without using the USB connection support cable. GB 0 To remove the battery pack To remove the battery pack To use your camcorder continuously for a long time Connect the AC adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). For details on how to connect the AC adaptor, refer to “Charging the battery pack” (p. 19). By using the AC adaptor, you can use your camcorder without worrying about the battery running out of charge. Notes on the AC Adaptor . Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. . Disconnect the AC Adaptor from the camcorder while holding both the camcorder and the DC plug. . . Recording time, Playing time (p. 58) . Remaining battery indicator (p. 29) Charging the battery pack abroad You can charge the battery pack in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range. Do not use an electronic voltage transformer. Getting GB 1 Turning the power on, and setting the date and time Turning the power on, and setting the date and time p.11 1 Open the LCD screen of your camcorder and turn the power on. . You can also turn on the camcorder by pressing POWER (p. 15). 2 Select the desired language, then select [Next]. 3 Select the desired geographical area with / , then select [Next]. Touch the button on the LCD screen. 4 Set [Daylight Savings] or [Summer Time], select the date format and the date and time. . If you set [Daylight Savings] or [Summer Time] to [On], the clock advances 1 hour. . When you select the date and time, select one of the items and adjust the value with Date & Time 1 1 2013 Back 10 : 30 PM Next / . . When you select . , the date and time setting operation is complete. Changing the language setting You can change the on-screen displays to show messages in a specified language. Select . [Setup] .[ General Settings] . [Language Setting] . a desired language. GB To turn off the power To turn off the power button (p. 15). If the viewfinder is pulled out, retract the viewfinder as shown in the illustration on the right. On turning the camcorder on or off using the LCD screen or the viewfinder The power of the camcorder is turned on or off depending on the status of the LCD screen or the viewfinder. Status Power of the camcorder LCD screen Viewfinder Open Retracted On Pulled out On Closed Retracted Off Pulled out On Notes . Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original position. When you make recording with the viewfinder only Pull out the viewfinder (.) and close the LCD panel and then adjust the angle you want (.). If the indicator on the viewfinder appears blurred, adjust the appearance using the viewfinder lens adjustment lever located on the above of the viewfinder. GB Getting To adjust the angle of the LCD panel To adjust the angle of the LCD panel . 90 degrees (max.) . 180 degrees (max.) . 90 degrees to the camcorder To turn off the beep sound Select . [Setup] . [ General Settings] .[Beep] . [Off ]. Notes . The recording date and time are recorded automatically on the recording media. They are not displayed during recording. However, you can check them as [Data Code] during playback. To display them, select . [Setup] . [ Playback Settings] . [Data Code] . [Date/Time]. . Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area ADJ] set to [On]. The clock may not automatically adjust to the correct time, depending on the country/ region selected for your camcorder. In this case, set [Auto Clock AD...

Эта инструкция также подходит к моделям:
Видеокамеры - HDR-PJ780VE (3.29 mb)
Видеокамеры - HDR-PJ790E (3.29 mb)
Видеокамеры - HDR-PJ790VE (3.29 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории