Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
• Remove the battery and the memory card from the camcorder and disconnect the AC power adaptor after use. -Store the battery in a stable, cool and dry place. (Recommended temperature : 59.F ~ 77.F (15.C~ 25.C), recommended humidity: 40%~ 60%) -Temperatures that are too high or too low shorten the battery lifetime. -The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty location. • Recycle or dispose of your dead batteries properly. • The battery lifetime is limited. -Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one. -Each battery’s life is affected by storage, operating, and environmental conditions. Basic operation of the camcorder TURNING YOUR CAMCORDER ON/OFF Home ( ) button LCD screen 1 Turn on the camcorder by opening the LCD screen. • Your camcorder turns on automatically when you open the LCD screen. • To turn the camcorder on when the LCD screen is already open, close the LCD screen and open it again. 2 To turn off the camcorder, press and hold the Home ( ) button or close the LCD screen. • The camcorder operates the self-diagnosis function when you turn it on. ..pages 93~97 • If the Quick On STBY function is set to 5 Min and you close the LCD screen when the power is on, the power saving mode activates. ..page 76 • The camcorder turns on automatically if connecting the AC power adaptor or inserting the battery to the camcorder with the LCD screen open. When using this camcorder for the first time When you use your camcorder for the first time or reset it, the time zone screen appears at start-up. Select your geographical location and then set the date and time. ..page 28 If you do not set the date and time, the time zone screen appears every time you turn on the camcorder. Basic operation of the camcorder SETTING THE OPERATION MODES You can easily switch the operating mode by touching the tabs on the LCD screen. Switching to the recording mode In STBY mode, touch the Video recording mode ( ) or Photo recording mode ( ) tab. Touching each tab switches to the respective mode. • You can also switch directly to the recording mode when pressing the Recording start/stop button in the playback mode. • You can switch to the desired recording mode by touching “Smart Auto”, “Manual”, or “Art Film” on the Home menu. STBY 00:00:00 [253Min] Switching to the playback mode You can switch to the playback mode by touching “Album” on the Home menu. ..page 47 • You can also switch the operation mode directly into the playback thumbnail display by touching the Playback ( ) tab in STBY mode. Smart Auto Manual Art Film Album Settings USING THE TOUCH SCREEN The touch screen lets you playback and recording with a simple touch of your finger. Place your hand on the rear side of the LCD screen to support it. Then, touch the items displayed on the screen. Touch Slightly touch the items to select or execute with your finger. STBY 00:00:00 [253Min] 27 Basic operation of the camcorder Drag Drag the touch screen to up, down, left, or right to select the desired items or files. Do not place any protective film on the LCD screen. If you leave a film attached for a long while, strong adhesion between the film and the surface of the screen may cause a malfunction of the touch screen. •• Be careful not to accidentally press the button near the LCD screen while using the touch screen. The tabs and indicators that appear on the LCD screen depend on the current recording/playback status of your camcorder. The camcorder does not recognise touches if you touch more than two points on the screen at the same time. Touch one point at a time. • • • Switching the information display mode You can switch the on-screen information display mode. Each time you touch the LCD screen, the full and minimum display modes alternate. Full display mode Minimum display mode STBY 00:00:00 [253Min] STBY Warning indicators and messages may appear, depending on the recording conditions. ..pages 93~97 Basic operation of the camcorder SETTING THE TIME ZONE AND DATE/TIME FOR THE FIRST TIME Set the date and time of your local area when turning on this camcorder for the first time. 1 Open the LCD screen to turn on the camcorder. • The time zone (“Home”) screen appears based on Lisbon and London (Greenwich Mean Time). 2 Select your local area on the map by touching the left ( ) or right ( ) tab on the LCD screen, and then press the ( ) tab. • The “Date/Time Set” screen appears. Home London,Lisbon [GMT-00:00] 01/JAN/2011 00:00 3 Set the date by touching the corresponding item or dragging it to up or down. 01 JAN 2011 Date / Time Set Date Month Year 4 Touch the time ( ) tab, and then set the time by touching the corresponding item or dragging it to up or down. Date / Time Set 00 00 Hr Min 5 Make sure the clock is correctly set, and then touch the ( ) tab. • The date/time setting finishes. • You...
Эта инструкция также подходит к моделям:Видеокамеры - HMX-Q130BP (14.5 mb)
Видеокамеры - HMX-Q130BN (14.5 mb)
Видеокамеры - HMX-Q11TP (14.5 mb)
Видеокамеры - HMX-Q10UP (14.5 mb)