Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Start the copy of Camera Control Pro 2 (available separately) installed on the host computer and confirm that “PC” is displayed in the camera’s top control panel. For information on using Camera Control Pro 2, see the Camera Control Pro 2 manual (pdf ). A Firewall Settings Image transfer and camera control modes use TCP port 15740 and UDP port 5353. Computer firewalls must be configured to allow access to these ports, as otherwise the computer may not be able to access the camera. A Ethernet Networks Do not disconnect the Ethernet cable while the camera is on. D Wireless Networks Operations may take longer on wireless networks. If the signal is disrupted while pictures are being transferred to Camera Control Pro 2, the LED on the WT-5 will flash yellow; turn the camera off and then on again. Transfer will resume when the connection is re-established. Note that transfer can not be resumed if you turn the camera off again before transfer is complete. ANetwork Status Network status can be viewed in the top level of the network menu. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here ( Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here (084). HTTP Server Select HTTP server to view the pictures on the camera memory card or take photographs from the web browser on a computer or iPhone (see page 27 for system requirements). Up to five users can access the camera at one time, although only one can take photographs. Note that the exposure meters do not turn off automatically when the camera is in http server mode. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. HT TP server profiles are indicated by a M icon. Highlight a profile and press 2to select the highlighted profile and return to the network menu. 2 Select Network connection. Highlight Network connection and press 2. 3 Select Enable. Highlight Enable and press 2to connect to the network and return to the network menu. The URL used for connection to the camera is displayed when a connection is established. 4 Launch the web browser. Launch the web browser on the computer or iPhone. 5 Enter the camera URL. Enter the camera URL (“followed by the camera IP address, as shown in the network menu) in the browser window address field. 6 Log in. Enter your user name and password in the web browser login dialog (the user name and password are set using Network settings > Options > HTTP user settings in the network menu as described on page 58; the default user name is “nikon” while the default password is blank). 7 Choose a language. Click Language and choose English, French, German, Japanese, or Spanish. 8 Choose an operating mode. Choose Shooting/Viewer to take pictures (028, 32) and Shooting/Viewer or Viewer to view existing pictures (030, 33). Up to five users at a time can connect using Viewer, but only one user at a time can connect using Shooting/Viewer (if another user is already connected using Shooting/Viewer, Shooting/Viewer will not be displayed and only four users will be able to connect using Viewer). ANetwork Status Network status can be viewed in the top level of the network menu. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The camera URL is displayed in green when a connection is established. Errors are also displayed here ( Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The camera URL is displayed in green when a connection is established. Errors are also displayed here (084). A HTTP Server System Requirements Windows CPU Intel Celeron, Pentium 4, or Core series, 1.0 GHz or better OS Pre-installed versions of Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista Home Basic/Home Premium/Business/ Enterprise/Ultimate (Service Pack 2), or Windows XP Home Edition/Professional (Service Pack 3). Browser Internet Explorer 8 RAM • Windows 7/Windows Vista: 1 GB or more (1.5 GB or more recommended) • Windows XP: 512 MB or more (1 GB or more recommended) Hard-disk space A minimum of 500 MB available on the startup disk (1 GB or more recommended) Monitor • Resolution: 1024 . 768 pixels (XGA) or more; 1280 . 1024 pixels (SXGA) or more recommended • Color: 24-bit color (True Color) or more Mac OS CPU PowerPC G4 (1 GHz or better), G5, Intel Core, or Xeon series OS Mac OS X version 10.6.8 Browser Safari 5.0 RAM 512 MB or more (2 GB or more recommended) Hard-disk space A minimum of 500 MB available on the star...