Оценок - 1, средний балл: 3
(
)
)
|
Фото и характеристики Canon Digital IXUS 50 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
SD card slot/battery cover is open • Confirm that the SD card slot/ battery cover is securely closed. Insufficient battery voltage • Insert a fully charged battery into the camera. • Use the AC Adapter Kit ACK-DC10 (sold separately). Poor contact between camera and battery terminals • Wipe the terminals with a clean dry cloth. Camera will not record Mode switch is set (Playback) • Set the mode switch to or . Flash is charging (Blinking in the LCD monitor) • The indicator will light orange when it is charged. You can then press the shutter button. SD card is full • Insert a new SD card. • If required, download the images to a computer and erase them from the SD card to make space. SD card is not formatted correctly • Format SD card. • If reformatting does not work, the SD card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. SD card is write- protected. • Slide the write-protect tab of the SD card upward (p. 23). Cannot play back You attempted to play back images shot with another camera or images edited with a computer • Computer images that cannot be played back will play back if they are added to the camera using the bundled software program ZoomBrowser EX or ImageBrowser. File name was changed with a computer or file location was changed • Set the file name or file number according to the Design rule for Camera File system standards. See About File Numbers and Folder Numbers (p. 112). Problem Cause Solution Lens will not retract SD card slot/battery cover was opened with power on • First close the SD card slot/battery cover and then turn the power off. SD card slot/battery cover was opened while recording to the SD card (warning signal sounds) • First close the SD card slot/ battery cover and then turn the power off. Battery pack consumed quickly Battery life exceeded if battery pack loses its charge quickly at normal temperature (23 °C/73 °F) • Replace the battery pack with a new one. Battery pack will not charge Battery pack life exceeded • Replace the battery pack with a new one. Poor contact between battery pack and battery charger • Insert battery pack securely into battery charger. • Ensure that battery charger plug is securely plugged into the power outlet. Sounds come from the camera interior The camera's horizontal/vertical orientation was changed • The camera's orientation mechanism is operating. There is no malfunction. Image is blurred or out of focus Camera moved • Be careful not to move the camera while pressing the shutter button. Autofocus function hampered by obstruction to AF- assist Beam • Be careful not to block the AF- assist Beam with fingers or other items. AF-assist Beam is set to [Off] • Set the AF-assist Beam to [On] (p. 53). Troubleshooting 165 Problem Cause Solution Image is blurred or out of focus Subject is out of focal range • For normal shooting conditions, stay at least 30 cm (1.0 ft.) from the subject. • In macro mode, stay in the range of 30 – 50 cm (1.0 – 1.6 ft.) from the subject (3 – 50 cm (1.2 in. – 1.6 ft.) at maximum wide angle). • In digital macro mode, stay in the range of 3 – 10 cm (1.2 – 3.9 in.) from the subject at maximum wide angle. • Use the infinity mode to shoot distant subjects. The subject is hard • Use the focus lock or AF lock to focus on to shoot. See Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) (p. 90). Subject in recorded image is too dark Insufficient light for shooting • Set the flash to on. Subject is dark in • Set the exposure compensation contrast to the to a positive (+) setting, use AE background lock or use the spot metering function. Subject is too far away for flash to reach • Shoot within 3.5 m (11.5 ft.) of the subject at the maximum wide angle or 2.0 m (6.6 ft.) of the subject at the telephoto end setting using the flash. • Raise the ISO sensitivity and then shoot. Subject in recorded image is too bright Subject is too close, making the flash too strong • When using the flash, stay at least 50 cm (1.6 ft.) from the subject. Subject is bright in • Set the exposure compensation contrast to the to a negative (-) setting, use AE background lock or use the spot metering function. Problem Cause Solution Subject in recorded image is too bright Light is shining directly on the subject or reflected off the subject into the camera • Change the shooting angle. Flash is set to on • Set the flash to off. A bar of light (red, purple) appears on the LCD monitor Subject is too bright • This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. (This bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.) Noise displays on the LCD monitor Subject's movements on LCD monitor are irregular Camera automatically lightened the image displayed on the LCD monitor to make it easier to see when shooting in a dark area • There is no effect on the recorded image. White dots appear on the image Light from the flash has reflected off ...