Оценок - 4, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Dialogs similar to the following will appear during this process (first time the camera is connected to a computer only). Windows XP The dialog on the right will appear after a few moments. Windows Windows 2000/Windows Me/Windows 98 SE Restart the computer according to the instructions if you are prompted to do so by a message. A dialog allowing you to set the default settings will display after installation. See Using the Software on the Windows Platform – The Basics (p. 16) for the subsequent procedures. •See USB driver installation not proceeding well in the Troubleshooting section (p. 78) if you are having problems installing the USB driver. •See Uninstalling the USB Driver (p. 75) to delete the USB driver installed with these procedures. •See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 85) if you were previously using either version. This concludes the software and USB driver installation and the procedures for connecting the camera to the computer. You may now download camera images to the computer (p. 16). Using the Software on the Windows Platform – The Basics This chapter explains the procedures for using ZoomBrowser EX to download the camera's images to the computer and print them. Read this chapter after completing the preparations in the Using the Software on the Windows Platform – Preparations section. Downloading Images to the Computer Begin by downloading the images to your computer. The downloading procedure is slightly different according to whether you are using a camera to computer connection (see below) or a memory card reader (p. 19). You may not be able to download images when the camera is connected to a computer if there are a large number of images (approximately 1000) on the memory card. Use a memory card reader to download in that case. Camera to Computer Connection 1 Attach the supplied interface cable to the computer’s USB port and the camera’s DIGITAL Terminal. Prepare the camera for communication with the computer. Procedures for attaching the camera to the computer and placing it in the correct mode for connecting vary between camera models. See the Camera User Guide. The Camera Control Window will appear. Camera Control Window Windows Using the Software on the Windows Platform – The Basics First Time Camera is Connected to a Computer Set the following settings the first time you connect the camera to the computer. These procedures are not required from the second connection onward. Select [Canon CameraWindow] when a dialog (Events dialog) similar to that on the right displays and click [OK]. Your camera model name or [Canon Camera] will appear here. Different programs may display according to your computer setup. If this Events dialog does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow], [PowerShot - IXY - IXUS - DV 6] and [CameraWindow]. 2 Download the images. Download the images using the camera or the computer. By default, the downloaded images are saved into the [My Pictures] folder. Placing a check mark here causes this window to automatically open when the camera and computer are connected. You can adjust the settings, such as the type of image downloaded and the destination folder, by clicking [Preferences]. Windows Using the Software on the Windows Platform – The Basics Using the Camera to Download Images (Direct Transfer Function) •If the conditions are right for the Direct Transfer function, the Direct Transfer settings menu will appear in the LCD monitor. In addition, the (Print/Share) button will light if your camera is equipped with one. •See the Camera User Guide for instructions regarding Direct Transfer settings and procedures. Set the Direct Transfer settings on the camera and press the (Print/Share) button or the SET button. Using the Computer to Download Images Click [Starts to download images]. Windows • By default, all the images that have yet to be downloaded will download. •To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded. •Click [Lets you select and download images] to show the camera images in a list, check the images before downloading and download only selected images. The downloaded images will be saved into folders according to their shooting date. Using the Software on the Windows Platform – The Basics By default, when downloading is complete, the thumbnails (tiny versions) of the downloaded images display in ZoomBrowser EX’s Main Window. Thumbnail The downloaded symbol displays on downloaded folders (the symbol will disappear when you exit ZoomBrowser EX). Next, print out the images (p. 21). Memory Card Reader Connection 1 Insert the memory card into the reader. Use a separately sold card adapter if required. See the manual for the memory card reader for its connection and handling instructions. 2 Select [Vi...
Эта инструкция также подходит к моделям:Видеокамеры - PowerShot S3 IS (6.96 mb)
Видеокамеры - PowerShot A520 (6.96 mb)
Видеокамеры - Digital IXUS 800 IS (6.96 mb)
Видеокамеры - Digital IXUS 65 (6.96 mb)