Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
64) is set to [On]. Color Accent Use this option to have only the color specified in the LCD monitor remain and to transform all others to black and white. Color Swap Use this option to transform a color specified in the LCD monitor into another. Only one different color can be selected. You cannot choose from among multiple colors. !Depending on the scene shot, ISO speed may rise and image noise may increase. Shooting in the Color Accent Mode Shooting 1 Still image: or button Movie: or button See Selecting a Shooting Mode in Basic Guide (p. 5) 2 !The camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). 3 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button. !Only one color can be specified. !You can use the or button to specify the range of colors that are retained. 4 Press to complete the setting, then shoot. !The default color accent is green. !You may not obtain the expected results if you use the flash. !The specified color accent is retained even if the camera.s power is turned off. Still image Movie .5: Only takes the color that you want to retain. +5: Also takes colors close to the one that you want to retain. 61 Shooting in the Color Swap Mode Original Color Desired Color (Before Swapping) (After Swapping) 1 Still image: or button Movie: or button See Selecting a Shooting Mode in Basic Guide (p. 5) Still image Movie 2 !The camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color). Still image 3 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. !Only one color can be specified. !You can use the or button to specify the range of colors that are swapped. .5: Only takes the color that you want to swap. +5: Also takes colors close to the one that you want to swap. 4 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. !Only one color can be specified. 5 Press to comlete the setting, then shoot. Shooting !The default setting for color swap mode will change green into white. !You may not obtain the expected results if you use the flash. !The colors specified in the color swap mode are retained even if the camera.s power is turned off. 63 Changing the Save Method for the Original Image When you are shooting still images in the Color Accent or Color Swap mode, you can specify whether or not both the altered image and the original image are recorded. (Rec.) Menu [Save Original] [On]/ [Off]. 1 See Menus and Settings (p. 23). !If [On] is selected, the two images will be numbered consecutively with the altered image following the original. When [Save Original] is Set to [On] -Only the color accent or color swap-altered image is shown in the LCD monitor during shooting. -The image that appears in the LCD monitor immediately after recording is the altered image shot with the color accent or color swap setting. If you erase the image at this point, the original image is erased along with the altered image. Exercise adequate caution before deleting an image. -Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off]. Adjusting the ISO Speed PowerShot A540 PowerShot A530 Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. 1 FUNC. Menu * (Auto). See Menus and Settings (p. 22). * Default setting. • Use the or button to select an ISO speed and press the FUNC./SET button. • Selecting (Auto) sets the optimal ISO speed according to the light level when shooting. Since the ISO speed setting will automatically be raised in dark places, the camera will select a faster shutter speed and reduce the chances of camera shake. !In mode, is not available. Shooting Switching between Flash Adjustment Settings PowerShot A540 Although the built-in flash will fire with automatic flash adjustments (except in the mode), it is also possible to set it so that it fires without any adjustments. (Rec.) Menu [Flash Adjust] [Auto]/ [Manual]. See Menus and Settings (p. 23). 65 Compensating the Flash Adjustment / Flash Output PowerShot A540 PowerShot A530 +/. (Flash) (Flash Exposure Compensation) Flash Output • When the shooting mode is set to , , , , or when [Flash Adjust] is set to [Auto] (p. 65) in or mode, settings can be adjusted in 1/3-stop increments in the range of .2 to +2 stops. • You can combine the flash exposure compensation with the camera.s exposure compensation function to achieve creative effects which compensate for background exposure. • When Shooting mode is set to or when [Flash Adjust] is set to [Manual] in or mode (p. 65), the flash output ca...
Эта инструкция также подходит к моделям:Видеокамеры - PowerShot A530 (3.61 mb)