Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Original 90° 270° (Play) Menu . 1 See Menus and Settings (p. 25). 2 Use the or button to select an image to rotate and press to rotate it. ..Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. ..This also can be set in the index playback mode. When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images. Playback/ 97 Playback with Transition Effects Playback with Transition Effects You can select the transition effect displayed when switching between images. No transition effect. The displayed image darkens and the next image gradually brightens until it is displayed. Press the button to have the previous image display from the left and the button to have the next image display from the right. 1 (Play) Menu / */ . See Menus and Settings (p. 25). * Default setting. Adding My Colors Effects You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p. 75. Vivid Lighter Skin Tone Neutral Darker Skin Tone Sepia Vivid Blue B/W Vivid Green Positive Film Vivid Red (Play) Menu . 1 See Menus and Settings (p. 25). 2 Use the or button to select an image, and press . 3 Use the or button to select the My Colors type, and press . ..The displayed image will reflect the My Colors effect. ..You can turn the zoom lever toward to check the image at a higher magnification. While the image is zoomed, you can press the FUNC./ SET button to switch between the image transformed with the My Colors effect and the original non-transformed image. 4 Select [OK],and press . ..The newly saved image transformed with the My Colors effect will be the last one in the list. ..To continue adding effects to other images, repeat the procedures from Step 2 onward. Playback/ 99 5 Press and select [Yes] or [No], then press . ..Selecting [Yes] displays the image transformed with the My Colors effect, while [No] returns you to the Play menu. ..The My Colors function will not work if there is insufficient space on the memory card. ..Although My Colors effects can be added any number of times to an image, the image quality will gradually deteriorate with each application and the intended colors may not be achieved. ..Color in images taken using My Colors (p. 75) in shooting mode and images edited with the My Colors function in playback mode may differ slightly. Attaching Sound Memos to Images Attaching Sound Memos to Images In playback mode (including single image playback, index playback, magnified playback, the review immediately after shooting in shooting mode and while confirming the focus immediately after the shooting) you can attach sound memos (up to 1 minute) to an image. The sound data is saved in WAVE format. 1 Press the button while playing back images. ..The sound memo control panel will display. 2 Use the or button to select (Record) and press . ..The elapsed time and the remaining time display. ..Pressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. ..Up to 1 minute of recordings can be added to any one image. Sound Memo Panel ..The sound mode can be changed Elapsed Time/ (p. 58). Remaining Time Volume (Adjust it with the or button) Sound Memo Panel Playback/ Exit Record Pause Play Erase Select [Erase] in the confirmation screen and press the FUNC./SET button. Volume (0~5 levels) ..You cannot attach sound memos to movies. ..Sound memos for protected images cannot be erased. 101 Sound-Only Recording (Sound Recorder) Sound-Only Recording (Sound Recorder) You can record sound only, without images, for up to two hours at one time. 1 (Play) Menu . See Menus and Settings (p. 25). 2 Select (Record) and press the button. ..Recording time will be displayed. ..Use the or button to change the sample rate. Sound quality will improve in the order of [11.025kHz], [22.050kHz], [44.100kHz]*, but the recorded file size will also increase respectively. * Default setting. ..When pressing the FUNC./SET button, recording will pause. Pressing the button once again will resume recording. ..The maximum recording time depends on the space available on the memory card, and the sound mode Available Recording Time Sound Control Panel (p. 157). ..When the memory cards fills, recording will automatically stop. ..In the playback mode, the Sound Control Panel can be displayed by holding the button. Automated Playback (Slide Shows) Automated Playback (Slide Shows) Automated Playback of Memory Card Images. * Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 111). All Images Plays all images on a memory card in order. Date Plays images bearing a specified date in order. My Category Plays the images in the selected category in order. Folder Plays images in a specified folder in order. Movies Plays movie files only, in order. Stills Plays still images only, in order. -Custom...