Оценок - 2, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Camera Battery Pack Battery Interface Cable Wrist StrapNB-6L (with Charger IFC-400PCU WS-DC11*1 terminal cover) CB-2LYE Getting Started DIGITAL CAMERA DIGITAL CAMERA Warranty (This Guide) Manuals Disk*2 Solution Disk*3 System Booklet *1For attachment instructions, refer to the Camera User Guide on the DIGITAL CAMERA Manuals Disk. *2 Contains the Camera User Guide and ImageBrowser EX User Guide (p. 8). *3 Contains software used with the camera. For installation instructions, refer to the Camera User Guide, and for instructions on use, refer to the ImageBrowser EX User Guide. Compatible Memory Cards A memory card is not included. The following memory cards (sold separately) can be used, regardless of capacity. For details on the number of shots and recording time per memory card, refer to “Specifications” in the Camera User Guide. • SD memory cards* • SDHC memory cards* • SDXC memory cards* • Eye-Fi cards * Conforms to SD specifications. However, not all memory cards have been verified to work with the camera. About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. Initial Preparations Initial Preparations Charging the Battery Remove the cover and insert the battery. • After aligning the omarks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Charge the battery. • Once you connect the power cord to the charger and plug the cord into a power outlet, the lamp will light up orange. • When charging is finished, the lamp turns green. Remove the battery. • For details on charging time and the number of shots or recording time available with a fully charged battery, refer to “Specifications” in the Camera User Guide. Inserting the Battery and Memory Card Open the cover. • Slide the cover ( ) and open it ( ). Insert the battery. • While pressing the battery lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position. • To remove the battery, press the battery lock in the direction of the arrow. Terminals Battery Lock Initial Preparations Check the card’s write-protect tab and insert the memory card. • Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position. • Insert the memory card facing as shown until it clicks into the locked position. • To remove the memory card, push it in until you feel a click, and then slowly release it. Close the cover. • Lower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). Terminals Setting the Date and Time Turn the camera on. • Press the ON/OFF button. • The Date/Time screen is displayed. Set the date and time. • Press the qr buttons to choose an option. • Press the op buttons or turn the 5 dial to specify the date and time. • When finished, press the m button. Initial Preparations Set the local time zone. .Press the qr buttons or turn the 5 dial to choose your local time zone. .Press the m button when finished. After a confirmation message, the setting screen is no longer displayed. .To turn off the camera, press the ON/OFF button. To adjust the date and time once you have set it, do the following. Press the n button. Move the zoom lever to choose the 3 tab. Press the op buttons or turn the 5 dial to choose [Date/Time], and then press the m button. Follow step 2 again to complete the setting. Press the n button. Enter Playback mode. Press the 1 button. Changing the Date and Time Display Language 5 Trying the Camera Out Access the setting screen and choose a language. • Press and hold the mbutton, and then immediately press the n button. • Press the opqr buttons or turn the 5 dial to choose a language, and then press the m button. Trying the Camera Out Shooting Turn the camera on and enter A mode. • Press the ON/OFF button. • Set the mode dial to A. Compose the shot. • To zoom in and enlarge the subject, move the zoom lever toward i (telephoto) as you watch the screen, and to zoom away from the subject, move it toward j (wide angle). Shoot still images. • Press the shutter button lightly ( ). • The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Press the shutter button all the way down ( ). Trying the Camera Out Shoot movies. • Press the movie button to start shooting, and press it again to stop. Viewing Enter Playback mode. • Press the 1 button. Browse through your images. • To view the previous or next image, press the qr butt...
Эта инструкция также подходит к моделям:Видеокамеры - PowerShot SX240 HS (2.62 mb)