Оценок - 2, средний балл: 3.5
(
)
)
|
Фото и характеристики Canon EF 28mm f/2.8 IS USM |
Фрагмент инструкции
The focusing ring always works, regardless of the focus mode . . After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) 3. Infinity Compensation Mark To compensate for shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the distance scale L mark is aligned with the distance index .. For accurate manual focusing of subjects at infinity, look through the viewfinder or look at the magnified image* on the LCD screen while rotating the focusing ring. * For cameras with Live View shooting capability. ZEROFFMF .. .. 1.40.513722221111ftm . .. Infinity compensation mark Distance index 4. Image Stabilizer You can use the Image Stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects and following shots). 1. Set the STABILIZER switch to ON . . . If you are not going to use the image stabilizer function, set the switch to OFF. 2. When you press the shutter button halfway, the Image Stabilizer will start operating. . Make sure the image in the viewfinder is stable, then press the shutter button the rest of the way down to take the picture. .The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. .The Image Stabilizer may not be fully effective if you shoot from a violently shaking vehicle or other transportation. .The Image Stabilizer consumes more power than normal shooting, so fewer shots can be taken if you use the function. .When shooting a still subject, it compensates for camera shake in all directions. .It compensates for vertical camera shake during following shots in a horizontal direction, and compensates for horizontal camera shake during following shots in a vertical direction. .When you use a tripod, the Image Stabilizer should be turned off to save battery power. .The stabilizer is equally effective for handheld photography and photography with a monopod. The Image Stabilizer effect may be reduced, however, depending on the shooting environment. .The Image Stabilizer also operates when the lens is used with extension tube EF12 II or EF25 II. .If you set the camera’s Custom Function to change the assigned button to operate the AF, the Image Stabilizer will operate when you press the newly assigned AF button. 5. Hood (Sold Separately) The EW-65B hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust. To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood in the direction of the arrow until the lens’s red dot is aligned with the hood’s stop position mark . . To remove the hood, hold down the button on the side and turn the hood in the direction of the arrow until the position mark on the hood aligns with the red dot .. The hood can be reverse-mounted on the lens for storage. .Part of the picture may be blocked if the hood is not attached properly. .When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. Specifications 6. Filters (Sold Separately) You can attach filters to the filter mounting thread on the front of the lens. .Only one filter may be attached. .Use a polarizing Canon filter (58mm). .To adjust the polarizing filter, first remove the lens hood. 7. Extension Tubes (Sold Separately) You can attach extension tube EF12 II or EF25 II for magnified shots. For shooting distance and magnification, see the extension tube specifications. MF mode is recommended for accurate focusing. 8. Close-up Lenses (Sold Separately) Attaching a close-up lens 250D/500D (58mm) enables close-up photography. For magnification, see the close-up lens specifications. MF mode is recommended for accurate focusing. . The extenders cannot be used with this lens. . CASE (Sold Separately) LP1014 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such ch...
Эта инструкция также подходит к моделям:Видеокамеры - EF 24mm f/2.8 IS USM (257.24 kb)