Оценок - 1, средний балл: 3
(
)
)
|
Фото и характеристики Canon EF 600mm f/4L IS II USM |
Фрагмент инструкции
Mounting and Detaching the Lens See your camera’s instructions for details on The lens mount has a rubber ring for enhanced mounting and detaching the lens. dust- and water-resistance. The rubber ring may cause slight abrasions around the camera’s lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. Attaching the strap Thread the end of the strap through the strap mount on the lens and then back through the clasp on the strap. Pull the strap tight and check that there is no slack in the clasp. After detaching the lens, place the lens with OOthe rear end up to prevent the lens surface and contacts from getting scratched. If the contacts get soiled, scratched, or have OOfingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. If the contacts get soiled or have fingerprints on OOthem, clean them with a soft cloth. If you remove the lens, cover it with the dust cap. OOTo attach it properly, align the lens mount index and the .index of the dust cap as shown in the diagram, and turn clockwise. To remove it, reverse the order. ENG-5 2. Setting the Focus Mode To shoot in autofocus (AF) mode, set the focus mode switch to AF. To shoot in manual focus (MF) mode, set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. To shoot in power focus (PF) mode, set the focus mode switch to PF when the focus preset switch (p. 8) is at OFF. Operating the playback ring enables focus change at a set speed. This is a useful feature for changing focus when shooting movies. After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) 3. Switching the Focusing Distance Range You can set the focusing distance range with a switch. By setting a suitable focusing distance range, the actual autofocusing time will be shorter. Lens Ranges FULL EF500mm f/4L IS II USM 3.7 m/12.14 ft. – 10 m/32.81 ft. 10 m/32.81 ft. – . FULL EF600mm f/4L IS II USM 4.5 m/14.76 ft. – 16 m/52.49 ft. 16 m/52.49 ft. – . ENG-6 4. AF Stop Button The AF stop function also works in AI Servo AF mode. Angle positioning of the AF stop button is adjustable by a Canon Service Center at cost. During autofocus operation, you can press the AF stop button to temporarily pause autofocus. If the shutter button is still pressed halfway when the AF stop button is released, autofocusing will continue as before. With the EOS 630/600, RT, A2/A2E/5, or 10S/10 OOset to the AI Servo AF mode and continuous shooting, AF will not resume even after you let go of the AF stop button. Press the shutter release button halfway to resume AF. With the EOS A2/A2E/5 and 10S/10 set to the OOSports mode, AF will not resume even after you let go of the AF stop button. Press the shutter release button halfway to resume AF. You can change the functions of the AF stop OObutton using the camera’s Custom Function. For details, please refer to the camera’s instructions. ENG-7 5. Focus Preset By presetting any focusing distance, you can instantly focus at that point even while you are shooting a different subject. This function operates in any of the AF, PF, and MF modes. < How to Set > Set the focus preset switch Press the shutter button Press the focus preset to ON or . halfway to focus the button. distance you want to preset. OO The focused distance will be preset. OO If the focus preset switch was set to , the beeper will sound once. ENG-8 Focus Preset < How to Focus at the Preset Distance > By turning the playback ring to the left or right, the focus shifts as far as the preset distance. Focus will shift freely released of AF focusing while the playback ring is still turned. OO If the focus preset switch was set to , the beeper will sound twice. When turning the playback ring, keep your finger OOaway from the shutter button. In One-Shot AF mode, the exposure will be locked when you press the shutter button halfway and focus is achieved. So if you press the shutter button halfway while turning the playback ring, the exposure may not be correct. When not using the focus preset, set the switch OOto OFF. The focus preset function will not work while a OOLive View image is displayed on the camera. In the following cases, the focusing distance scale (p. 14) will move slightly. It will not affect the image. • When you press the focus preset button. • When you turn the playback ring. ENG-9 6. Power Focus (PF) Mode Using the playback ring enables smooth focus change. This is a useful feature for changing focus when shooting movies. With the focus preset switch set to OFF, set the focus mode Rotate the playback ring to switch to PF. change the focus. When the playback ring is rotated in a certain direction, focus changes in the same direction as when the focusing ring is rotated. You can make a 2-step change in focus...
Эта инструкция также подходит к моделям:Видеокамеры - EF 500mm f/4L IS II USM (1.26 mb)