Оценок - 1, средний балл: 4 ( )

Производитель: Canon Размер: 29.5 mb Название файла: Язык инструкции:

Фото и характеристики  Canon  Speedlite 600EX

К этому устройству также есть другие инструкции:

Видеокамеры - Speedlite 600EX (431.76 kb)

Видеокамеры - Speedlite 600EX (18.65 mb)

3 Set to <%>. ..Press function button 2 and set to <%>. 85 A A a: Wireless Multiple Flash Shooting with Flash Ratio 4 Set the flash ratio. ..Press function button 3 . ..Press function button 3 . ..Turn <9> to set the flash ratio, and press the <8> button. ..Press function button 4 to return to the shooting-ready state. 5 Take the picture. • The slave unit flashes at the set flash ratio. Autoflash Shooting with Three Slave Groups You can add firing group C to firing groups A and B. C is convenient for lighting that eliminates a subject’s shadow. The basic setting method is the same as B “Autoflash Shooting with Two Slave Groups”. 1 Set slave C. ..Set the slave unit you want to add to flash firing group <6> in the same way as step 1 on the preceding page. 2 Set to <^>. ..Set the master unit to <^> in the same way as steps 2 and 3 on the preceding page. a: Wireless Multiple Flash Shooting with Flash Ratio 3 Set flash exposure compensation as required. ..Press function button 3 , turn <9> and select <6>. ..Press function button 3 . ..Turn <9> to set the flash exposure compensation amount, and press the <8> button. ..Press function button 4 to return to the shooting-ready state. Slave Group Control If you need more flash output or wish to perform more sophisticated lighting, you can increase the number of slave units. Simply set an additional slave unit to the firing group (A, B or C) whose flash output you want to increase. There is no restriction on the number of units. For example, if you set a firing group with three slave units to <4>, the three units are treated and controlled as a single firing group A with a large flash output. Gr = A Gr = A Gr = A Firing group A 87 ..To fire the three firing groups A, B and C at the same time, set <^>. With the <%> setting, firing group C does not fire. ..If you shoot with firing group C pointing directly toward the main subject, overexposure may result. ..In some EOS film cameras that support E-TTL autoflash, you cannot perform multiple flash wireless shooting with a flash ratio setting. ..The flash ratio of 8:1 to 1:1 to 1:8 is equivalent to 3:1 to 1:1 to 1:3 (1/2stop increment) when converted to number of stops. ..The details of the flash ratio settings are as follows. q: Wireless Multiple Flash Shooting with Manual Flash Output This describes wireless (multiple flash) shooting using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit. 1 Set the flash mode to . 2 Set the number of firing groups. ..While is displayed, press function button 2 and set the groups to fire. ..The setting changes as follows each time you press the button: ALL (_) > A/B (%) > A/B/C (]). 3 Select a firing group. ..Press function button 3 , turn <9> and select the group for which you want to set the flash output. 4 Set the flash output. ..Press function button 3 <1>. ..Turn <9> to set the flash output, and press the <8> button. ..Repeat steps 3 and 4 to set the flash output of all groups. 5 Take the picture. • Each group fires at the set flash ratio. ..When ALL <_> is set, set A, B or C as the firing group for the slave units. ..To fire multiple slave units with the same flash output, select ALL <_> in step 2. Manual Flash/Stroboscopic Flash Setting on a Slave Unit You can directly operate the slave unit to manually set the manual flash or stroboscopic flash. This function is called individual slave. This is convenient when, for example, you use the Speedlite Transmitter ST-E2 (sold separately) to perform wireless manual flash or stroboscopic flash. 1 Set the slave unit (p.78). 2 Set the individual slave. ..Press the button on the slave unit continuously until <(> is displayed. Manual Flash • The flash mode is set to . ..Set the manual flash output (p.31). Stroboscopic Flash ..Press the button and set to . ..Set the stroboscopic flash settings (p.33). ..Press the button again to return to the normal slave status. The flash frequency for stroboscopic flash during optical wireless transmission shooting can be set from 1 Hz to 199 Hz (settings from 250 Hz to 500 Hz are not available). A slave unit set as an individual slave does not reflect the master unit’s flash mode. It fires in the flash mode set on the individual slave. 89 6 Customizing the Speedlite This chapter describes how to customize the Speedlite with the Custom Functions (C.Fn) and Personal Functions (P.Fn). When the camera’s shooting mode is set to a fully automatic mode or an Image Zone mode, the operations in this chapter are not available. Set the camera’s shooting mode to V/X/ W/q/ 5(Creative Zone mode). 91 C/ >: Setting Custom and Personal Functions You can customize the Speedlite features to suit your shooting preferences with Custom Functions and Personal Functions. Note that the Personal Functions are customizable functions unique to the 600EX-RT/600EX. C: Custom Functions 1 Display ...

Фотоаппараты - Speedlite 600EX-RT (29.5 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: